Stepping valve actuator algorithm for a CamleSs IC engine

I. Zibani, R. Marumo, J. Chuma, I. Ngebani, K. Tsamaase

Research output: Contribution to journalConference article

Abstract

Camless Engines offer many advantages over poppet valve systems. However, they suffer from air/hydraulic leakages and piston-valve interactions. In addressing the situation, the stepping valve rotates perpendicularly to the piston motion with no interactions. In this case, the valve events will be flexible enough to allow engine cranking without the mechanical starter. For this study, a 3-phase, 12-coil Stator rated at 3Amp 12V DC and a Stepping Valve were used. To avoid friction against its seat, the Stepping Valve is lifted up by 1mm in 2mS. Then it steps to a new Valve State Position in 2mS before gently landing back on its seat in 4mS. The Valve Event Algorithm has been designed, simulated and successfully programmed onto an Altera Programmable Device using Max Plus II Design Environment. The overall aim of this study is to have the three components required for ignition: fuel, spark and air, entirely controlled in software to maintain engine efficiency for the entire RPM range.

Original languageEnglish
Pages (from-to)99-106
Number of pages8
JournalProcedia Manufacturing
Volume33
DOIs
Publication statusPublished - 2019
Event16th Global Conference on Sustainable Manufacturing, GCSM 2018 - Lexington, United States
Duration: Oct 2 2018Oct 4 2018

All Science Journal Classification (ASJC) codes

  • Industrial and Manufacturing Engineering
  • Artificial Intelligence

Fingerprint Dive into the research topics of 'Stepping valve actuator algorithm for a CamleSs IC engine'. Together they form a unique fingerprint.

  • Cite this