MATLAB/Simulink based design and development of a Buck Boost converter as a smooth starter for DC motor control

R. Rajeswari, S. Ravi, Vitaliy Mezhuyev, V. Kumarakrishnan

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

This proposal proposes a DC/DC Buck Boost converter which has been used as a smooth starter for a DC Permanent Magnet Motor. In the existing system the DC/DC Buck Converter is used which provide the output less than the input Signal. If we need increased value of the input signal it is not possible using the buck converter. Hence we use DC/DC Buck-Boost Converter from which we can obtain both the increased and decreased output from the given input. Previously pulse width modulation signals with respective to motor voltage is used. However they produce variations in the voltage and current of the motor. The above problem is overcome by using DC/DC Power converter. The proposed system with reduction in size, reduced ripples and increase in speed makes the system to operate at both low and high power applications. The proposed system results in higher efficiency, reduces the ripple content and the stress. The results are validated through MATLAB/Simulink.

Original languageEnglish
Title of host publicationProceedings of the IEEE International Conference on Soft-Computing and Network Security, ICSNS 2015
PublisherInstitute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)9781479917525
DOIs
Publication statusPublished - Oct 5 2015
EventIEEE International Conference on Soft-Computing and Network Security, ICSNS 2015 - Coimbatore, India
Duration: Feb 25 2015Feb 27 2015

Other

OtherIEEE International Conference on Soft-Computing and Network Security, ICSNS 2015
CountryIndia
CityCoimbatore
Period2/25/152/27/15

Fingerprint

Starters
DC motors
MATLAB
DC-DC converters
Electric potential
Pulse width modulation
Permanent magnets
Design and development

All Science Journal Classification (ASJC) codes

  • Information Systems and Management
  • Safety, Risk, Reliability and Quality
  • Computer Networks and Communications

Cite this

Rajeswari, R., Ravi, S., Mezhuyev, V., & Kumarakrishnan, V. (2015). MATLAB/Simulink based design and development of a Buck Boost converter as a smooth starter for DC motor control. In Proceedings of the IEEE International Conference on Soft-Computing and Network Security, ICSNS 2015 [7292440] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICSNS.2015.7292440
Rajeswari, R. ; Ravi, S. ; Mezhuyev, Vitaliy ; Kumarakrishnan, V. / MATLAB/Simulink based design and development of a Buck Boost converter as a smooth starter for DC motor control. Proceedings of the IEEE International Conference on Soft-Computing and Network Security, ICSNS 2015. Institute of Electrical and Electronics Engineers Inc., 2015.
@inproceedings{5900c161e4a14835a1a69b6c11bae0f7,
title = "MATLAB/Simulink based design and development of a Buck Boost converter as a smooth starter for DC motor control",
abstract = "This proposal proposes a DC/DC Buck Boost converter which has been used as a smooth starter for a DC Permanent Magnet Motor. In the existing system the DC/DC Buck Converter is used which provide the output less than the input Signal. If we need increased value of the input signal it is not possible using the buck converter. Hence we use DC/DC Buck-Boost Converter from which we can obtain both the increased and decreased output from the given input. Previously pulse width modulation signals with respective to motor voltage is used. However they produce variations in the voltage and current of the motor. The above problem is overcome by using DC/DC Power converter. The proposed system with reduction in size, reduced ripples and increase in speed makes the system to operate at both low and high power applications. The proposed system results in higher efficiency, reduces the ripple content and the stress. The results are validated through MATLAB/Simulink.",
author = "R. Rajeswari and S. Ravi and Vitaliy Mezhuyev and V. Kumarakrishnan",
year = "2015",
month = "10",
day = "5",
doi = "10.1109/ICSNS.2015.7292440",
language = "English",
booktitle = "Proceedings of the IEEE International Conference on Soft-Computing and Network Security, ICSNS 2015",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
address = "United States",

}

Rajeswari, R, Ravi, S, Mezhuyev, V & Kumarakrishnan, V 2015, MATLAB/Simulink based design and development of a Buck Boost converter as a smooth starter for DC motor control. in Proceedings of the IEEE International Conference on Soft-Computing and Network Security, ICSNS 2015., 7292440, Institute of Electrical and Electronics Engineers Inc., IEEE International Conference on Soft-Computing and Network Security, ICSNS 2015, Coimbatore, India, 2/25/15. https://doi.org/10.1109/ICSNS.2015.7292440

MATLAB/Simulink based design and development of a Buck Boost converter as a smooth starter for DC motor control. / Rajeswari, R.; Ravi, S.; Mezhuyev, Vitaliy; Kumarakrishnan, V.

Proceedings of the IEEE International Conference on Soft-Computing and Network Security, ICSNS 2015. Institute of Electrical and Electronics Engineers Inc., 2015. 7292440.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - MATLAB/Simulink based design and development of a Buck Boost converter as a smooth starter for DC motor control

AU - Rajeswari, R.

AU - Ravi, S.

AU - Mezhuyev, Vitaliy

AU - Kumarakrishnan, V.

PY - 2015/10/5

Y1 - 2015/10/5

N2 - This proposal proposes a DC/DC Buck Boost converter which has been used as a smooth starter for a DC Permanent Magnet Motor. In the existing system the DC/DC Buck Converter is used which provide the output less than the input Signal. If we need increased value of the input signal it is not possible using the buck converter. Hence we use DC/DC Buck-Boost Converter from which we can obtain both the increased and decreased output from the given input. Previously pulse width modulation signals with respective to motor voltage is used. However they produce variations in the voltage and current of the motor. The above problem is overcome by using DC/DC Power converter. The proposed system with reduction in size, reduced ripples and increase in speed makes the system to operate at both low and high power applications. The proposed system results in higher efficiency, reduces the ripple content and the stress. The results are validated through MATLAB/Simulink.

AB - This proposal proposes a DC/DC Buck Boost converter which has been used as a smooth starter for a DC Permanent Magnet Motor. In the existing system the DC/DC Buck Converter is used which provide the output less than the input Signal. If we need increased value of the input signal it is not possible using the buck converter. Hence we use DC/DC Buck-Boost Converter from which we can obtain both the increased and decreased output from the given input. Previously pulse width modulation signals with respective to motor voltage is used. However they produce variations in the voltage and current of the motor. The above problem is overcome by using DC/DC Power converter. The proposed system with reduction in size, reduced ripples and increase in speed makes the system to operate at both low and high power applications. The proposed system results in higher efficiency, reduces the ripple content and the stress. The results are validated through MATLAB/Simulink.

UR - http://www.scopus.com/inward/record.url?scp=84973316121&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84973316121&partnerID=8YFLogxK

U2 - 10.1109/ICSNS.2015.7292440

DO - 10.1109/ICSNS.2015.7292440

M3 - Conference contribution

BT - Proceedings of the IEEE International Conference on Soft-Computing and Network Security, ICSNS 2015

PB - Institute of Electrical and Electronics Engineers Inc.

ER -

Rajeswari R, Ravi S, Mezhuyev V, Kumarakrishnan V. MATLAB/Simulink based design and development of a Buck Boost converter as a smooth starter for DC motor control. In Proceedings of the IEEE International Conference on Soft-Computing and Network Security, ICSNS 2015. Institute of Electrical and Electronics Engineers Inc. 2015. 7292440 https://doi.org/10.1109/ICSNS.2015.7292440