Fabrication of AISI 304 Austenitic Stainless Steels with TiN Addition Using Spark Plasma Sintering Method

Babatunde Abiodun Obadele, Ramokone Marcia Mafafo, Walter Roberto Tuckart, Peter Apata Olubambi

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

The spark plasma sintering (SPS) is a type of electric discharge sintering technique used to consolidate metallic/ceramic powders. In this study, spark plasma sintering was used to fabricate 304 stainless steel with TiN addition. The best parameters that influence the sintering process such as sintering temperature, heating time and pressure were investigated. Results show that by varying the amount of TiN, the sintered properties of the composites could be significantly affected. The relative density decreased with the increment of TiN. Microhardness values vary from 270 to 350 HV0.1.

Original languageEnglish
Title of host publicationTrends in Manufacturing and Engineering Management - Select Proceedings of ICMechD 2019
EditorsS. Vijayan, Nachiappan Subramanian, K. Sankaranarayanasamy
PublisherSpringer Nature, Singapore
Pages681-689
Number of pages9
ISBN (Electronic)978-981-15-4745-4
ISBN (Print)978-981-15-4744-7
DOIs
Publication statusPublished - 2021
Event2nd International Conference on Mechanical Engineering Design, ICMechD 2019 - Chennai, India
Duration: Apr 25 2019Apr 26 2019

Publication series

NameLecture Notes in Mechanical Engineering
ISSN (Print)2195-4356
ISSN (Electronic)2195-4364

Conference

Conference2nd International Conference on Mechanical Engineering Design, ICMechD 2019
CountryIndia
CityChennai
Period4/25/194/26/19

All Science Journal Classification (ASJC) codes

  • Automotive Engineering
  • Aerospace Engineering
  • Mechanical Engineering
  • Fluid Flow and Transfer Processes

Fingerprint Dive into the research topics of 'Fabrication of AISI 304 Austenitic Stainless Steels with TiN Addition Using Spark Plasma Sintering Method'. Together they form a unique fingerprint.

  • Cite this

    Obadele, B. A., Mafafo, R. M., Tuckart, W. R., & Olubambi, P. A. (2021). Fabrication of AISI 304 Austenitic Stainless Steels with TiN Addition Using Spark Plasma Sintering Method. In S. Vijayan, N. Subramanian, & K. Sankaranarayanasamy (Eds.), Trends in Manufacturing and Engineering Management - Select Proceedings of ICMechD 2019 (pp. 681-689). (Lecture Notes in Mechanical Engineering). Springer Nature, Singapore. https://doi.org/10.1007/978-981-15-4745-4_61