Effect of Coating Thickness on Wear Performance of Inconel 625 coating

R. R. Phiri, O. P. Oladijo, N. Maledi, E. T. Akinlabi

Research output: Contribution to journalConference article

3 Citations (Scopus)

Abstract

INCONEL® nickel-chromium alloy 625 is widely used for its high strength, excellent corrosion resistance and creep resistance on prolonged exposure to aggressive environment. However, despite its properties and industrial application, its wear resistance is not entirely satisfactory. The article investigates and presents the tribological performance of Inconel 625 coating using reciprocating scratch test. High velocity oxyfuel (HVOF) method was used to deposit Inconel 625 film onto 304 stainless steel surfaces. The frictional behavior and wear data were studied in order to observe the effect of coating thickness on wear failure. The results revealed that coatings of higher thickness showed lower coefficient of friction, better adhesion and good wear resistance in comparison to the low coating thickness.

Original languageEnglish
Article number012159
JournalIOP Conference Series: Materials Science and Engineering
Volume423
Issue number1
DOIs
Publication statusPublished - Nov 6 2018
Event2018 4th International Conference on Applied Materials and Manufacturing Technology, ICAMMT 2018 - Nanchang, China
Duration: May 25 2018May 27 2018

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Engineering(all)

Fingerprint Dive into the research topics of 'Effect of Coating Thickness on Wear Performance of Inconel 625 coating'. Together they form a unique fingerprint.

  • Cite this