Design of synthetic optimizing neuro fuzzy temperature controller for dual screw profile plastic extruder using labview

Ravi Samikannu, Balakrishnan Anantharaman Poonamallie

Research output: Contribution to journalArticle

8 Citations (Scopus)

Abstract

Problem statement: The temperature control in plastic extrusion machine is an important factor to produce high quality plastic products. The first order temperature control system in plastic extrusion comprises of coupling effects, long delay time and large time constants. Controlling temperature is very difficult as the process is multistage process and the system coupled with each other. In order to conquer this problem the system is premeditated with neuro fuzzy controller using LabVIEW. Approach: The existing technique involved is conventional PID controller, Neural controller, mamdani type Fuzzy Logic Controller and the proposed method is neuro fuzzy controller. Results: Manifest feature of the proposed method is smoothing of undesired control signal of conventional PID, neural controller and mamdani type FLC controller. The software incorporated the LabVIEW graphical programming language and MATLAB toolbox were used to design temperature control in plastic extrusion system. Hence neuro fuzzy controller is most powerful approach to retrieve the adaptiveness in the case of nonlinear system. Conclusion: The tuning of the controller was synchronized with the controlled variable and allowing the process at its desired operating condition. The results indicated that the use of proposed controller improve the process in terms of time domain specification, set point tracking and also reject disturbances with optimum stability.

Original languageEnglish
Pages (from-to)671-677
Number of pages7
JournalJournal of Computer Science
Volume7
Issue number5
DOIs
Publication statusPublished - 2011

Fingerprint

Plastics extruders
Controllers
Temperature
Temperature control
Extrusion
Plastics
Plastic products
Computer programming languages
MATLAB
Fuzzy logic

All Science Journal Classification (ASJC) codes

  • Software
  • Computer Networks and Communications
  • Artificial Intelligence

Cite this

@article{efdd1bcc189c437c81a439e6f426ba57,
title = "Design of synthetic optimizing neuro fuzzy temperature controller for dual screw profile plastic extruder using labview",
abstract = "Problem statement: The temperature control in plastic extrusion machine is an important factor to produce high quality plastic products. The first order temperature control system in plastic extrusion comprises of coupling effects, long delay time and large time constants. Controlling temperature is very difficult as the process is multistage process and the system coupled with each other. In order to conquer this problem the system is premeditated with neuro fuzzy controller using LabVIEW. Approach: The existing technique involved is conventional PID controller, Neural controller, mamdani type Fuzzy Logic Controller and the proposed method is neuro fuzzy controller. Results: Manifest feature of the proposed method is smoothing of undesired control signal of conventional PID, neural controller and mamdani type FLC controller. The software incorporated the LabVIEW graphical programming language and MATLAB toolbox were used to design temperature control in plastic extrusion system. Hence neuro fuzzy controller is most powerful approach to retrieve the adaptiveness in the case of nonlinear system. Conclusion: The tuning of the controller was synchronized with the controlled variable and allowing the process at its desired operating condition. The results indicated that the use of proposed controller improve the process in terms of time domain specification, set point tracking and also reject disturbances with optimum stability.",
author = "Ravi Samikannu and Poonamallie, {Balakrishnan Anantharaman}",
year = "2011",
doi = "10.3844/jcssp.2011.671.677",
language = "English",
volume = "7",
pages = "671--677",
journal = "Journal of Computer Science",
issn = "1549-3636",
publisher = "Science Publications",
number = "5",

}

Design of synthetic optimizing neuro fuzzy temperature controller for dual screw profile plastic extruder using labview. / Samikannu, Ravi; Poonamallie, Balakrishnan Anantharaman.

In: Journal of Computer Science, Vol. 7, No. 5, 2011, p. 671-677.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Design of synthetic optimizing neuro fuzzy temperature controller for dual screw profile plastic extruder using labview

AU - Samikannu, Ravi

AU - Poonamallie, Balakrishnan Anantharaman

PY - 2011

Y1 - 2011

N2 - Problem statement: The temperature control in plastic extrusion machine is an important factor to produce high quality plastic products. The first order temperature control system in plastic extrusion comprises of coupling effects, long delay time and large time constants. Controlling temperature is very difficult as the process is multistage process and the system coupled with each other. In order to conquer this problem the system is premeditated with neuro fuzzy controller using LabVIEW. Approach: The existing technique involved is conventional PID controller, Neural controller, mamdani type Fuzzy Logic Controller and the proposed method is neuro fuzzy controller. Results: Manifest feature of the proposed method is smoothing of undesired control signal of conventional PID, neural controller and mamdani type FLC controller. The software incorporated the LabVIEW graphical programming language and MATLAB toolbox were used to design temperature control in plastic extrusion system. Hence neuro fuzzy controller is most powerful approach to retrieve the adaptiveness in the case of nonlinear system. Conclusion: The tuning of the controller was synchronized with the controlled variable and allowing the process at its desired operating condition. The results indicated that the use of proposed controller improve the process in terms of time domain specification, set point tracking and also reject disturbances with optimum stability.

AB - Problem statement: The temperature control in plastic extrusion machine is an important factor to produce high quality plastic products. The first order temperature control system in plastic extrusion comprises of coupling effects, long delay time and large time constants. Controlling temperature is very difficult as the process is multistage process and the system coupled with each other. In order to conquer this problem the system is premeditated with neuro fuzzy controller using LabVIEW. Approach: The existing technique involved is conventional PID controller, Neural controller, mamdani type Fuzzy Logic Controller and the proposed method is neuro fuzzy controller. Results: Manifest feature of the proposed method is smoothing of undesired control signal of conventional PID, neural controller and mamdani type FLC controller. The software incorporated the LabVIEW graphical programming language and MATLAB toolbox were used to design temperature control in plastic extrusion system. Hence neuro fuzzy controller is most powerful approach to retrieve the adaptiveness in the case of nonlinear system. Conclusion: The tuning of the controller was synchronized with the controlled variable and allowing the process at its desired operating condition. The results indicated that the use of proposed controller improve the process in terms of time domain specification, set point tracking and also reject disturbances with optimum stability.

UR - http://www.scopus.com/inward/record.url?scp=80053007537&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=80053007537&partnerID=8YFLogxK

U2 - 10.3844/jcssp.2011.671.677

DO - 10.3844/jcssp.2011.671.677

M3 - Article

AN - SCOPUS:80053007537

VL - 7

SP - 671

EP - 677

JO - Journal of Computer Science

JF - Journal of Computer Science

SN - 1549-3636

IS - 5

ER -