Design and implementation of a microcontroller based buck boost converter as a smooth starter for permanent magnet motor

S. Ravi, Vitaliy Mezhuyev, K. Iyswarya Annapoorani, P. Sukumar

Research output: Contribution to journalArticle

6 Citations (Scopus)

Abstract

This proposal proposes a DC/DC Buck Boost converter which has been used as a smooth starter for a DC Permanent Magnet Motor. In the existing system the DC/DC Buck Converter is used which provide the output less than the input Signal. Using buck converter it is difficult to increase the value of the input signal. Hence DC/DC Buck- Boost Converter used from which it is possible to get both the increased and decreased output from the given input. Previously pulse width modulation signals with respective to motor voltage is used. However they produce variations in the voltage and current of the motor. The above problem is overcome by using DC/DC Power converter. The proposed system with reduction in size, reduced ripples and increase in speed makes the system to operate at both low and high power applications. The proposed system results in higher efficiency, reduces the ripple content and the stress. The results are validated through MATLAB/Simulink and real time implementation.

Original languageEnglish
Pages (from-to)566-574
Number of pages9
JournalIndonesian Journal of Electrical Engineering and Computer Science
Volume1
Issue number3
DOIs
Publication statusPublished - Mar 1 2016

Fingerprint

Starters
Microcontroller
Permanent Magnet
Microcontrollers
Converter
Permanent magnets
DC-DC converters
Buck Converter
DC-DC Converter
Ripple
Voltage
Electric potential
Pulse width modulation
Power Converter
MATLAB
Output
Matlab/Simulink
High Power
High Efficiency
Modulation

All Science Journal Classification (ASJC) codes

  • Signal Processing
  • Information Systems
  • Hardware and Architecture
  • Computer Networks and Communications
  • Control and Optimization
  • Electrical and Electronic Engineering

Cite this

@article{0e549f36f2b14aeeab6bd9f89c50fda0,
title = "Design and implementation of a microcontroller based buck boost converter as a smooth starter for permanent magnet motor",
abstract = "This proposal proposes a DC/DC Buck Boost converter which has been used as a smooth starter for a DC Permanent Magnet Motor. In the existing system the DC/DC Buck Converter is used which provide the output less than the input Signal. Using buck converter it is difficult to increase the value of the input signal. Hence DC/DC Buck- Boost Converter used from which it is possible to get both the increased and decreased output from the given input. Previously pulse width modulation signals with respective to motor voltage is used. However they produce variations in the voltage and current of the motor. The above problem is overcome by using DC/DC Power converter. The proposed system with reduction in size, reduced ripples and increase in speed makes the system to operate at both low and high power applications. The proposed system results in higher efficiency, reduces the ripple content and the stress. The results are validated through MATLAB/Simulink and real time implementation.",
author = "S. Ravi and Vitaliy Mezhuyev and {Iyswarya Annapoorani}, K. and P. Sukumar",
year = "2016",
month = "3",
day = "1",
doi = "10.11591/ijeecs.v1.i3.pp566-574",
language = "English",
volume = "1",
pages = "566--574",
journal = "Indonesian Journal of Electrical Engineering and Computer Science",
issn = "2502-4752",
publisher = "Institute of Advanced Engineering and Science (IAES)",
number = "3",

}

Design and implementation of a microcontroller based buck boost converter as a smooth starter for permanent magnet motor. / Ravi, S.; Mezhuyev, Vitaliy; Iyswarya Annapoorani, K.; Sukumar, P.

In: Indonesian Journal of Electrical Engineering and Computer Science, Vol. 1, No. 3, 01.03.2016, p. 566-574.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Design and implementation of a microcontroller based buck boost converter as a smooth starter for permanent magnet motor

AU - Ravi, S.

AU - Mezhuyev, Vitaliy

AU - Iyswarya Annapoorani, K.

AU - Sukumar, P.

PY - 2016/3/1

Y1 - 2016/3/1

N2 - This proposal proposes a DC/DC Buck Boost converter which has been used as a smooth starter for a DC Permanent Magnet Motor. In the existing system the DC/DC Buck Converter is used which provide the output less than the input Signal. Using buck converter it is difficult to increase the value of the input signal. Hence DC/DC Buck- Boost Converter used from which it is possible to get both the increased and decreased output from the given input. Previously pulse width modulation signals with respective to motor voltage is used. However they produce variations in the voltage and current of the motor. The above problem is overcome by using DC/DC Power converter. The proposed system with reduction in size, reduced ripples and increase in speed makes the system to operate at both low and high power applications. The proposed system results in higher efficiency, reduces the ripple content and the stress. The results are validated through MATLAB/Simulink and real time implementation.

AB - This proposal proposes a DC/DC Buck Boost converter which has been used as a smooth starter for a DC Permanent Magnet Motor. In the existing system the DC/DC Buck Converter is used which provide the output less than the input Signal. Using buck converter it is difficult to increase the value of the input signal. Hence DC/DC Buck- Boost Converter used from which it is possible to get both the increased and decreased output from the given input. Previously pulse width modulation signals with respective to motor voltage is used. However they produce variations in the voltage and current of the motor. The above problem is overcome by using DC/DC Power converter. The proposed system with reduction in size, reduced ripples and increase in speed makes the system to operate at both low and high power applications. The proposed system results in higher efficiency, reduces the ripple content and the stress. The results are validated through MATLAB/Simulink and real time implementation.

UR - http://www.scopus.com/inward/record.url?scp=85014335234&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85014335234&partnerID=8YFLogxK

U2 - 10.11591/ijeecs.v1.i3.pp566-574

DO - 10.11591/ijeecs.v1.i3.pp566-574

M3 - Article

VL - 1

SP - 566

EP - 574

JO - Indonesian Journal of Electrical Engineering and Computer Science

JF - Indonesian Journal of Electrical Engineering and Computer Science

SN - 2502-4752

IS - 3

ER -