Corrosion behavior of ductile and austempered ductile cast iron in 0.01M and 0.05M NaCl Environments.

Ojo Jeremiah Akinribide, Samuel Olukayode Akinwamide, Olawale Olarewaju Ajibola, Babatunde Abiodun Obadele, Samuel Oloruntoba oluwagbenga Olusunle, Peter Apata Olubambi

Research output: Contribution to journalConference article

Abstract

In this investigation, the corrosion performance of ductile iron (DI) and austempered ductile cast iron (ADI) used in the production of engine sleeve was considered. The significant concentration of sodium chloride (0.01 M and 0.05 M) was utilized to analyse corrosion behaviour of both alloyed materials in the two environments. The microstructural images of the two distinct materials in each condition were resolved and diverse stages developed are mainly (carbides and the martensitic stage). Additionally, in Comparism with the DI and ADI not subjected to any condition, the consumption rate of DI was higher than that of ADI. The SEM was used to affirm the uniqueness of each phase. The two imperative components, for example, Cl- and Fe were assessed by SEM-EDS examination. The samples subjected to these conditions were appeared to have comparable corrosion attack. The nearness of delamination of oxide layers and oxidation was essential to each sample attempted under the 0.05 NaCl. As a result of silicon content, the DI indicates more oxidation at the surface accessible to the conditions. Thus, releases an impression of being the materials with the most raised corrosion resistance as a result of more broad scope of passive layers.

Original languageEnglish
Pages (from-to)167-172
Number of pages6
JournalProcedia Manufacturing
Volume30
DOIs
Publication statusPublished - Jan 1 2019
Externally publishedYes
Event14th Global Congress on Manufacturing and Management, GCMM 2018 - Brisbane, Australia
Duration: Dec 5 2018Dec 7 2018

Fingerprint

Nodular iron
Cast iron
Corrosion
Oxidation
Scanning electron microscopy
Sodium chloride
Delamination
Carbides
Corrosion resistance
Energy dispersive spectroscopy
Engines
Silicon
Oxides

All Science Journal Classification (ASJC) codes

  • Industrial and Manufacturing Engineering
  • Artificial Intelligence

Cite this

Akinribide, Ojo Jeremiah ; Akinwamide, Samuel Olukayode ; Ajibola, Olawale Olarewaju ; Obadele, Babatunde Abiodun ; Olusunle, Samuel Oloruntoba oluwagbenga ; Olubambi, Peter Apata. / Corrosion behavior of ductile and austempered ductile cast iron in 0.01M and 0.05M NaCl Environments. In: Procedia Manufacturing. 2019 ; Vol. 30. pp. 167-172.
@article{8ae3fc45a4984cc9930a9f1578c664df,
title = "Corrosion behavior of ductile and austempered ductile cast iron in 0.01M and 0.05M NaCl Environments.",
abstract = "In this investigation, the corrosion performance of ductile iron (DI) and austempered ductile cast iron (ADI) used in the production of engine sleeve was considered. The significant concentration of sodium chloride (0.01 M and 0.05 M) was utilized to analyse corrosion behaviour of both alloyed materials in the two environments. The microstructural images of the two distinct materials in each condition were resolved and diverse stages developed are mainly (carbides and the martensitic stage). Additionally, in Comparism with the DI and ADI not subjected to any condition, the consumption rate of DI was higher than that of ADI. The SEM was used to affirm the uniqueness of each phase. The two imperative components, for example, Cl- and Fe were assessed by SEM-EDS examination. The samples subjected to these conditions were appeared to have comparable corrosion attack. The nearness of delamination of oxide layers and oxidation was essential to each sample attempted under the 0.05 NaCl. As a result of silicon content, the DI indicates more oxidation at the surface accessible to the conditions. Thus, releases an impression of being the materials with the most raised corrosion resistance as a result of more broad scope of passive layers.",
author = "Akinribide, {Ojo Jeremiah} and Akinwamide, {Samuel Olukayode} and Ajibola, {Olawale Olarewaju} and Obadele, {Babatunde Abiodun} and Olusunle, {Samuel Oloruntoba oluwagbenga} and Olubambi, {Peter Apata}",
year = "2019",
month = "1",
day = "1",
doi = "10.1016/j.promfg.2019.02.024",
language = "English",
volume = "30",
pages = "167--172",
journal = "Procedia Manufacturing",
issn = "2351-9789",
publisher = "Elsevier BV",

}

Corrosion behavior of ductile and austempered ductile cast iron in 0.01M and 0.05M NaCl Environments. / Akinribide, Ojo Jeremiah; Akinwamide, Samuel Olukayode; Ajibola, Olawale Olarewaju; Obadele, Babatunde Abiodun; Olusunle, Samuel Oloruntoba oluwagbenga; Olubambi, Peter Apata.

In: Procedia Manufacturing, Vol. 30, 01.01.2019, p. 167-172.

Research output: Contribution to journalConference article

TY - JOUR

T1 - Corrosion behavior of ductile and austempered ductile cast iron in 0.01M and 0.05M NaCl Environments.

AU - Akinribide, Ojo Jeremiah

AU - Akinwamide, Samuel Olukayode

AU - Ajibola, Olawale Olarewaju

AU - Obadele, Babatunde Abiodun

AU - Olusunle, Samuel Oloruntoba oluwagbenga

AU - Olubambi, Peter Apata

PY - 2019/1/1

Y1 - 2019/1/1

N2 - In this investigation, the corrosion performance of ductile iron (DI) and austempered ductile cast iron (ADI) used in the production of engine sleeve was considered. The significant concentration of sodium chloride (0.01 M and 0.05 M) was utilized to analyse corrosion behaviour of both alloyed materials in the two environments. The microstructural images of the two distinct materials in each condition were resolved and diverse stages developed are mainly (carbides and the martensitic stage). Additionally, in Comparism with the DI and ADI not subjected to any condition, the consumption rate of DI was higher than that of ADI. The SEM was used to affirm the uniqueness of each phase. The two imperative components, for example, Cl- and Fe were assessed by SEM-EDS examination. The samples subjected to these conditions were appeared to have comparable corrosion attack. The nearness of delamination of oxide layers and oxidation was essential to each sample attempted under the 0.05 NaCl. As a result of silicon content, the DI indicates more oxidation at the surface accessible to the conditions. Thus, releases an impression of being the materials with the most raised corrosion resistance as a result of more broad scope of passive layers.

AB - In this investigation, the corrosion performance of ductile iron (DI) and austempered ductile cast iron (ADI) used in the production of engine sleeve was considered. The significant concentration of sodium chloride (0.01 M and 0.05 M) was utilized to analyse corrosion behaviour of both alloyed materials in the two environments. The microstructural images of the two distinct materials in each condition were resolved and diverse stages developed are mainly (carbides and the martensitic stage). Additionally, in Comparism with the DI and ADI not subjected to any condition, the consumption rate of DI was higher than that of ADI. The SEM was used to affirm the uniqueness of each phase. The two imperative components, for example, Cl- and Fe were assessed by SEM-EDS examination. The samples subjected to these conditions were appeared to have comparable corrosion attack. The nearness of delamination of oxide layers and oxidation was essential to each sample attempted under the 0.05 NaCl. As a result of silicon content, the DI indicates more oxidation at the surface accessible to the conditions. Thus, releases an impression of being the materials with the most raised corrosion resistance as a result of more broad scope of passive layers.

UR - http://www.scopus.com/inward/record.url?scp=85067277353&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85067277353&partnerID=8YFLogxK

U2 - 10.1016/j.promfg.2019.02.024

DO - 10.1016/j.promfg.2019.02.024

M3 - Conference article

AN - SCOPUS:85067277353

VL - 30

SP - 167

EP - 172

JO - Procedia Manufacturing

JF - Procedia Manufacturing

SN - 2351-9789

ER -