Find Research outputs

Search results

• Conference contribution

  Simulation of a co-digester plant using aspen plus

  Nduse, R. & Oladiran, T. M., 2016, Proceedings of the 5th IASTED International Conference on Power and Energy Systems, AfricaPES 2016. Acta Press, p. 325-332 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Sintering and heat-treatment of injection moulded 440K-type martensitic stainless steel compacts

  Yousaf Anwar, M., Bhero, S., Messer, P. F. & Davies, H. A., 2008, Proceedings of the Euro International Powder Metallurgy Congress and Exhibition, Euro PM 2008. European Powder Metallurgy Association (EPMA), Vol. 2. p. 215-220 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Sizing of an anaerobic biodigester for the organic fraction of municipal solid waste

  Kigozi, R., Aboyade, A. O. & Muzenda, E., Jan 1 2014, World Congress on Engineering, WCE 2014. Douglas, C., Ao, S. I., Ao, S. I., Grundfest, W. S., Burgstone, J., Douglas, C., Burgstone, J. & Ao, S. I. (eds.). Newswood Limited, Vol. 2. p. 659-663 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  4 Citations (Scopus)

• Sliding mode simulation and robustaness controller

  Ahmed, A. A., Ahmad, R. B., Alobaidi, S. A., Yahya, A., Hassnawi, L. A., Ali, Z. G. & Tahir, H. H., Dec 1 2011, Proceedings - 2nd International Conference on Engineering and Industries, ICEI 2011. p. 91-96 6 p. 6218534

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Small, low cost and high performance filters for mobile telecommunication

  Chuma, J. M., Mirshekar, D., Masupe, S. & Kepaletswe, T., 2004, 2004 IEEE AFRICON: 7th AFRICON Conference in Africa: Technology Innovation. Vol. 2. p. 1011-1013 3 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Smart start-stop system for a camless engine employing rotary valves

  Zibani, I., Chuma, J. & Marumo, R., 2014, Proceedings of the IASTED International Conference on Modelling and Simulation, AfricaMS 2014. ACTA Press, p. 184-191 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Soft information assisted phase noise estimation in vector OFDM using linear MMSE receivers

  Ngebani, I., Li, Y., Xia, X. G., Zhao, M., Chuma, J. & Cai, Y., 2015, Proceedings of 19th International ITG Workshop on Smart Antennas, WSA 2015. Institute of Electrical and Electronics Engineers Inc., 7051827

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Soil biochemical properties and plant growth of Platycodongrandiflorium in major plantation area in South Korea

  Rubenecia, M. R. U., Park, J. S., Kim, B. S., Ultra Jr, V. & Lee, S. C., 2013, The Korean society of medical crop science symposium conference. p. 99

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Soil chemical and microbial properties affecting root growth of Platycodongrandiflorum

  Rubenecia, M. R. U., Ultra Jr, V. & Lee, S. C., 2014, Improvement of crop productivity in response to climate change. p. 26

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Soil Nutrient Status of Major Ginseng Production Areas in South Korea

  Rubenecia, M. R. U., Seo, P. D., Ultra Jr, V., Park, C. B., Ahn, Y. S. & Lee, S. C., 2013, The Korean society of medical crop science symposium conference. p. 101

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Solar energy for high grade thermal applications in the tropical region

  Oladiran, M. T., 1997, Solar Engineering. Claridge, D. E. & Pacheco, J. E. (eds.). ASME, p. 405-410 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Spheroidisation and oxide disruption phenomena in direct selective laser melting (SLM) of pre-alloyed Al-Mg and Al-Si powders

  Olakanmi, E. O., Cochrane, R. F. & Dalgarno, K. W., Oct 5 2009, TMS 2009 - 138th Annual Meeting and Exhibition - Supplemental Proceedings. Vol. 1. p. 371-380 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  7 Citations (Scopus)

• SPI-climate change impacts on agricultural droughts

  Tirivarombo, S., 2014, Proceedings of the IASTED International Conference on Environment and Water Resource Management, AfricaEWRM 2014. ACTA Press, p. 51-58 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Stabilisation and solidification of steel industry sludge

  Falayi, T. & Ntuli, F., 2018, HNICEM 2017 - 9th International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment and Management. Institute of Electrical and Electronics Engineers Inc., p. 1-4 4 p. (HNICEM 2017 - 9th International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment and Management; vol. 2018-January).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

• Stacked and planar dual-mode filters using dielectric loaded rectangular cavity resonator

  Mirshekar-Syahakal, D., Sim, C. W. & Chuma, J. M., Jan 1 2000, ICMMT 2000 - 2000 2nd International Conference on Microwave and Millimeter Wave Technology. Institute of Electrical and Electronics Engineers Inc., p. 100-103 4 p. 895630

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Steady secondary flows of Phan-Thien-Tanner fluids in the vicinity of a corner

  Letelier, M. F., Acosta, M., Córdova, J. & Siginer, D. A., 2002, Fluids Engineering. American Society of Mechanical Engineers (ASME), p. 291-295 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Structural and mechanical analysis of silane compounds coatings on AISI 304

  Baruwa, A. D., Akinlabi, E. T., Oladijo, O. P. & Mwema, F., 2019, Mechanics of Solids, Structures, and Fluids. American Society of Mechanical Engineers(ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 9).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Structural behaviour of beams under simultaneous load and steel corrosion

  Malumbela, G., Moyo, P. & Alexander, M., 2009, Concrete Repair, Rehabilitation and Retrofitting II - Proceedings of the 2nd International Conference on Concrete Repair, Rehabilitation and Retrofitting, ICCRRR. p. 253-254 2 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  5 Citations (Scopus)

• Students' Capability in Bridging the Entrepreneurial and Innovation Chasm

  Malele, V., Letsoalo, M. E. & Mafu, M., May 13 2021, Proceedings of 2021 IEEE 12th International Conference on Mechanical and Intelligent Manufacturing Technologies, ICMIMT 2021. Institute of Electrical and Electronics Engineers Inc., p. 315-321 7 p. 9476206. (Proceedings of 2021 IEEE 12th International Conference on Mechanical and Intelligent Manufacturing Technologies, ICMIMT 2021).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study of interactive stresses in thin WC-Co coating of thick mild steel substrate using high-precision neutron diffraction

  Venter, A. M., Luzin, V., Oladijo, O. P., Cornish, L. A. & Sacks, N., 2014, Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation VI. Vol. 772. p. 161-165 5 p. (Materials Science Forum; vol. 772).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  4 Citations (Scopus)

• Study of NOx reduction in counter-current chromatographic reactor

  Cristian, B. J. C. & Agachi, P. S., Dec 1 2006, 2006 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR. p. 102-106 5 p. 4022828

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study of the microstructure and crystal orientation of as-cast Ti-10.2Mo-19.5Nb alloy

  Raganya, L., Moshokoa, N., Obadele, J., Olubambi, P. A. & Machaka, R., Jul 3 2020, Materials Today : Proceedings. Vol. 38. p. 1054-1058 5 p. (Materials Today: Proceedings).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Study on the mechanical behavior of excavation and support construction of shallow tunnel

  Yang, Z. X., Song, L., Wang, H., Jiao, Y. Y., Li, S. C., Adoko, A. C. & Zhang, H. Q., 2013, Advances in Civil and Industrial Engineering. Vol. 353-354. p. 1693-1698 6 p. (Applied Mechanics and Materials; vol. 353-354).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Sub-tropical clayey soils-acid mine drainage interactions: A glance at material

  Agbenyeku, E. E. O., Muzenda, E. & Msibi, I. M., Jan 1 2016, WCECS 2016 - World Congress on Engineering and Computer Science 2016. Grundfest, W. S., Douglas, C. & Ao, S. I. (eds.). Newswood Limited, Vol. 2226. p. 630-635 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Suitability of Municipal Solid Waste Transfer Stations in Harare, Zimbabwe

  Nhubu, T., Muzenda, E., Mbohwa, C., Patel, B. & Mateescu, C., Nov 2019, Proceedings of 2019 7th International Renewable and Sustainable Energy Conference, IRSEC 2019. El Hibaoui, A., Essaaidi, M. & Zaz, Y. (eds.). Institute of Electrical and Electronics Engineers Inc., 9078181. (Proceedings of 2019 7th International Renewable and Sustainable Energy Conference, IRSEC 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Surface coating processes: From conventional to the advanced methods; a short review

  Baruwa, A. D., Akinlabi, E. T. & Oladijo, O. P., 2020, Advances in Manufacturing Engineering - Selected Articles from ICMMPE 2019. Emamian, S. S., Yusof, F. & Awang, M. (eds.). Springer Nature, Singapore, p. 483-494 12 p. (Lecture Notes in Mechanical Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Surface coating processes: From conventional to silane organic compound applications: recent and prospects

  Baruwa, A. D., Akinlabi, E. T., Oladijo, O. P. & Mwema, F. M., Sep 2020, Advances in Manufacturing Engineering - Selected Articles from ICMMPE 2019. Emamian, S. S., Yusof, F. & Awang, M. (eds.). Springer Nature, Singapore, p. 495-502 8 p. (Lecture Notes in Mechanical Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Sustainability issues in sputtering deposition technology

  Mwema, F. M., Akinlabi, E. T. & Oladijo, O. P., 2019, 4th North American IEOM Conference. IEOM 2019. IEOM Society, p. 737-744 8 p. (Proceedings of the International Conference on Industrial Engineering and Operations Management).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Sustenance of dark fermentative hydrogen production by an undefined bacterial culture

  Obazu, F. O., Afolabi, A. S., Daramola, M. O. & Gray, V. M., Jan 1 2015, WCE 2015 - World Congress on Engineering 2015. Ao, S. I., Gelman, L., Gelman, L., Hukins, D. W. L., Hunter, A., Korsunsky, A. M., Ao, S. I. & Ao, S. I. (eds.). Newswood Limited, Vol. 2218. p. 951-954 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Synergizing food-energy-water (few) resources for sustainable benefits

  Agbenyeku, E. E. O., Muzenda, E., Msibi, I. M. & Masebinu, S. O., Jan 1 2015, WCECS 2015 - World Congress on Engineering and Computer Science 2015. Douglas, C., Burgstone, J., Grundfest, W. S., Burgstone, J., Douglas, C. & Ao, S. I. (eds.). Newswood Limited, Vol. 2220. p. 632-636 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Synthesis, characterization of gold (III) complexes and an in vitro evaluation of their cytotoxic properties

  Chiririwa, H. & Muzenda, E., 2014, World Congress on Engineering, WCE 2014. Newswood Limited, Vol. 2. p. 637-640 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Synthesis and characterization of new nitrogen donor ligands

  Chiririwa, H. & Muzenda, E., Jan 1 2014, World Congress on Engineering, WCE 2014. Douglas, C., Ao, S. I., Ao, S. I., Grundfest, W. S., Burgstone, J., Douglas, C., Burgstone, J. & Ao, S. I. (eds.). Newswood Limited, Vol. 2. p. 624-627 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• System model performance coupled with DPSK modulation over flat rayleigh fading channels

  Sidek, O., Yahya, A. & Salleh, M. F. M., 2009, Proceedings of the 2009 5th Advanced International Conference on Telecommunications, AICT 2009. p. 194-197 4 p. 5072430

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Techno-Econometric Analysis of Membrane Technology for Biogas Upgrading

  Masebinu, S. O., Akinlabi, E. T., Muzenda, E., Mbohwa, C. & Aboyade, A. O., 2015, WCECS 2015: Transactions on Engineering Technologies. Ao, S. I., Kim, H. & Amouzegar, M. (eds.). Springer Singapore, p. 481-497

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Techno-economic feasibility for recovering biogas in a bio augmented municipal sewage plant

  Manyuchi, M. M., Mbohwa, C. & Muzenda, E., 2018, Proceedings of the International Conference on Industrial Engineering and Operations Management, IEOM 2018. IEOM Society, p. 37-44 8 p. (Proceedings of the International Conference on Industrial Engineering and Operations Management; vol. 2018-March).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Technological Advances and Sustainable Workforce Development through Enhanced Collaboration for Sustainability of Transport Infrastructure

  Zhang, G. & Oladele, A. S., 2020, International Conference on Transportation and Development 2020: Planning and Development - Selected Papers from the International Conference on Transportation and Development 2020. Zhang, G. (ed.). American Society of Civil Engineers (ASCE), p. 277-286 10 p. (International Conference on Transportation and Development 2020: Planning and Development - Selected Papers from the International Conference on Transportation and Development 2020).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Technology selection of biogas digesters for OFMSW via multi-criteria decision analysis

  Kigozi, R., Aboyade, A. O. & Muzenda, E., Jan 1 2014, World Congress on Engineering, WCE 2014. Newswood Limited, Vol. 2. p. 1069-1075 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Technology transfer centre activities for developing transportation engineering professionals-a case of Botswana

  Oladele, A. S., 2014, T and DI Congress 2014: Planes, Trains, and Automobiles - Proceedings of the 2nd Transportation and Development Institute Congress. American Society of Civil Engineers (ASCE), p. 584-591 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Termite-hill: Routing towards a mobile sink for improving network lifetime in Wireless Sensor Networks

  Zungeru, A. M., Ang, L. M. & Seng, K. P., Apr 26 2012, Proceedings - 3rd International Conference on Intelligent Systems Modelling and Simulation, ISMS 2012. p. 622-627 6 p. 6169774

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  15 Citations (Scopus)

• The applicability of dc resistivity imaging to investigating the feedback mechanism between water quality and transpiration beneath circular islands in the Okavango delta, Botswana: A Case study of Thata Island

  Molwalefhe, L. N. & Shemang, E. M., Dec 1 2007, Environmental and Engineering Geophysical Society - 20th, SAGEEP 2007: Geophysical Investigation and Problem Solving for the Next Generation. Vol. 1. p. 385-398 14 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• The control of foot-and-mouth disease in Botswana: Special reference to vaccination

  Letshwenyo, M., Fanikiso, M. & Chimbombi, M., 2005, Control of Infectious Animal Diseases by Vaccination. Schudel, A. & Lombard, M. (eds.). p. 403-413 11 p. (Developments in Biologicals; vol. 119).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  4 Citations (Scopus)

• The development and application of incremental sheet forming in bio-medical industries

  Oladele, S. K. & Samuel, A. A., Dec 1 2012, Materials Science and Technology Conference and Exhibition 2012, MS and T 2012. Vol. 2. p. 1540-1547 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• The dynamics of plug zones in elasto-plastic flows in unsteady flow in circular tubes

  Letelier, M. F., Siginer, D. A., Ahumada, J. L. & Stockle, J. S., Dec 1 2012, ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012. PARTS A, B, C, D ed. Vol. 7. p. 1023-1028 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• The effect of composition of carbon fibre on the mechanical and morhpological properties of carbon fibre reinforced polyamide 6 (PA6/CF)

  Ude, A. U., Ratnam, C. T. & Azhari, C. H., 2007, General Poster Session 2007: Light Metals - Proceedings of Symposium held during the 2007 TMS Annual Meeting. p. 31-40 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• The effect of valve control on a motor vehicle engine performance

  Zibani, I., Chuma, J. & Marumo, R. R., 2012, Proceedings of the IASTED African Conference on Modelling and Simulation, AfricaMS 2012. p. 140-147 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• The importance of the mine manager and the appraisal system in the mining sector

  Manyuchi, M. M., Mbohwa, C. & Muzenda, E., 2020, Proceedings of the International Conference on Industrial Engineering and Operations Management. March ed. IEOM Society, p. 2697-2701 5 p. (Proceedings of the International Conference on Industrial Engineering and Operations Management; vol. 0, no. March).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

• The influence of nano TiN additions on mechanical properties and fracture behaviour of spark plasma sintered SAF 2205

  Oke, S. R., Mphahlele, M. R., Ige, O. O., Falodun, O. E., Obadele, B. A. & Olubambi, P. A., Jan 1 2017, Materials Science and Technology Conference and Exhibition 2017, MS and T 2017. Association for Iron and Steel Technology, AISTECH, p. 1172-1174 3 p. (Materials Science and Technology Conference and Exhibition 2017, MS and T 2017; vol. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• The NEED project: Enhancing the widespread use of renewable energy resources in the Southern African region

  Katende, J., Oladiran, M. T., Kelebopile, L., Onyango, T., Huneke, M., Kapfhamer, S., Zorner, W., Kgathi, D., Mbaiwa, J. E., Motsholapheko, M. R., Chisale, P., John, S., Zulu, A., Mpanga, S., Muya, M., Kaoma, M., Ngendo, D. & Zulu, A., May 6 2016, Proceedings of the 24th Conference on the Domestic Use of Energy, DUE 2016. Institute of Electrical and Electronics Engineers Inc., 7466721

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Thermal and chemical characterization of lignocellulosic wastes for energy uses

  Charis, G., Danha, G. & Muzenda, E., 2020, Wastes: Solutions, Treatments and Opportunities III - Selected papers from the 5th International Conference Wastes: Solutions, Treatments and Opportunities, 2019. Vilarinho, C., Castro, F., Gonçalves, M. & Fernando, A. L. (eds.). CRC Press/Balkema, p. 518-523 6 p. (Wastes: Solutions, Treatments and Opportunities III - Selected papers from the 5th International Conference Wastes: Solutions, Treatments and Opportunities, 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Thermo-Double Diffusion Radiation Effects on the flow of Casson fluid in the Presence of Porous Media and Magnetic field over a stretching Sheet

  Mahanta, G., Shaw, S., Das, M., Mahato, D. & Mohanty, S., Feb 2020, Proceedings of the 2020 International Conference on Renewable Energy Integration into Smart Grids: A Multidisciplinary Approach to Technology Modelling and Simulation, ICREISG 2020. Institute of Electrical and Electronics Engineers Inc., p. 158-163 6 p. 9174545. (Proceedings of the 2020 International Conference on Renewable Energy Integration into Smart Grids: A Multidisciplinary Approach to Technology Modelling and Simulation, ICREISG 2020).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution