Find Research outputs

Search results

• Conference contribution

  Effect of silicon nitride (Si₃N₄) addition on the mechanical and tribological performance of al-fe-si alloy (AA8011)

  Fayomi, J., Popoola, A. P. I., Popoola, O. M. & Oladijo, O. P., 2020, Advanced Materials and Processing Technologies II. Zhao, Y. (ed.). Trans Tech Publications Ltd, Vol. 982. p. 34-38 5 p. (Materials Science Forum; vol. 982 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • silicon nitride
  • Silicon nitride
  • silicon nitrides
  • composite materials
  • Composite materials
  1 Citation (Scopus)

• Effect of Solids Concentration in Cow Dung on Biogas Yield

  Makhura, E. P., Muzenda, E. & Lekgoba, T., Nov 2019, Proceedings of 2019 7th International Renewable and Sustainable Energy Conference, IRSEC 2019. El Hibaoui, A., Essaaidi, M. & Zaz, Y. (eds.). Institute of Electrical and Electronics Engineers Inc., 9078218. (Proceedings of 2019 7th International Renewable and Sustainable Energy Conference, IRSEC 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Biogas
  • Anaerobic digestion
  • Methane
  • Gases
  • Animals

• Effect of substrates on the microstructure of thermally sprayed WC-4.88 wt% Co coatings

  Oladijo, O. P., Venter, A. M., Cornish, L. A., Sacks, N. & Shrivastava, S., 2010, Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010. European Powder Metallurgy Association (EPMA), Vol. 3.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Coatings
  • Substrates
  • coatings
  • Microstructure
  • Sprayed coatings

• Effects of average grain size and misorientation angle on the deformation behaviour of nanocrystalline grain structures

  Oladele, S. K. & Samuel, A. A., Dec 1 2012, Materials Science and Technology Conference and Exhibition 2012, MS and T 2012. Vol. 1. p. 693-700 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Crystal microstructure
  • Polycrystals
  • Plastic deformation
  • Metals
  • Stress concentration

• Efficient load balancing and multicasting for uncertain-source SDN: Real-time link-cost monitoring

  Semong, T. & Xie, K., 2019, Software Engineering and Algorithms in Intelligent Systems - Proceedings of 7th Computer Science On-line Conference 2018. Silhavy, R. (ed.). Springer Verlag, Vol. 763. p. 178-187 10 p. (Advances in Intelligent Systems and Computing; vol. 763).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Multicasting
  • Software defined networking
  • Telecommunication links
  • Resource allocation
  • Bandwidth
  1 Citation (Scopus)

• Eidps: An efficient approach to protect the network and intrusion prevention

  Selvaraj, R., Kuthadi, V. M. & Marwala, T., Jan 1 2016, Information Systems Design and Intelligent Applications - Proceedings of 3rd International Conference, INDIA 2016. Satapathy, S. C., Mandal, J. K., Udgata, S. K. & Bhateja, V. (eds.). Springer Verlag, p. 35-47 13 p. (Advances in Intelligent Systems and Computing; vol. 434).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Servers
  • Intrusion detection
  • Cloud computing
  • Internet
  • Viruses

• Electrochemical behaviour of mild steel in some agro fluids

  Afolabi, A. S., Ogazi, A. C., Adams, F. V. & Abdulkareem, A. S., Jan 1 2014, World Congress on Engineering, WCE 2014. Douglas, C., Ao, S. I., Ao, S. I., Grundfest, W. S., Burgstone, J., Douglas, C., Burgstone, J. & Ao, S. I. (eds.). Newswood Limited, Vol. 2. p. 641-646 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Carbon steel
  • Fluids
  • Corrosion rate
  • Corrosion
  • Cathodic polarization
  1 Citation (Scopus)

• Electrochemical characteristic of cathodically protected mild steel in 3.5% Nacl and 1 M H ₂ SO ₄

  Tladi, M. N. A., Maloma, R., Obadele, B. A. & Olubambi, P. A., Apr 17 2018, 2018 IEEE 9th International Conference on Mechanical and Intelligent Manufacturing Technologies, ICMIMT 2018. Institute of Electrical and Electronics Engineers Inc., p. 91-94 4 p. (2018 IEEE 9th International Conference on Mechanical and Intelligent Manufacturing Technologies, ICMIMT 2018; vol. 2018-January).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Sodium chloride
  • Carbon steel
  • Chronoamperometry
  • Potentiodynamic polarization
  • Corrosion
  1 Citation (Scopus)

• Embedded concurrent computing architecture using FPGA

  Salih, M. H., Ahmad, R. B., Yahya, A. & Arshad, M. R., Dec 1 2012, Proceedings - 2012 7th International Conference on System of Systems Engineering, SoSE 2012. p. 439-444 6 p. 6384129

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Field programmable gate arrays (FPGA)
  • Multitasking
  2 Citations (Scopus)

• Empirical Identification of Narrowband Interference in Broadband PLC Networks at the Receiver

  Awino, S. O., Afuflo, T. J. O., Mosalaosi, M. & Akuon, P. O., Dec 31 2018, 2018 Progress In Electromagnetics Research Symposium, PIERS-Toyama 2018 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 2160-2164 5 p. 8597885. (Progress in Electromagnetics Research Symposium; vol. 2018-August).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Frequency bands
  • Telecommunication networks
  • Interference suppression
  • Communication
  • Data communication systems
  2 Citations (Scopus)

• Encoding mutually unbiased bases in orbital angular momentum for quantum key distribution

  Dudley, A., Mafu, M., Goyal, S., Giovannini, D., McLaren, M., Konrad, T., Padgett, M. J., Petruccione, F., Lütkenhaus, N. & Forbes, A., Jan 1 2014, Complex Light and Optical Forces VIII. SPIE, Vol. 8999. 89991I

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Quantum Key Distribution
  • Quantum cryptography
  • Light modulators
  • Mutually Unbiased Bases
  • Angular momentum
  1 Citation (Scopus)

• Energy attenuation capability of woven natural silk (WNS)/epoxy composites plates subjected to drop-weight impacts

  Ude, A. U., Sopian, K. & Azhari, C. H., May 28 2010, TMS 2010 - 139th Annual Meeting and Exhibition - Supplemental Proceedings. Vol. 2. p. 115-122 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • silk
  • Silk
  • attenuation
  • composite materials
  • Composite materials
  1 Citation (Scopus)

• Enhancing Maximum Power Point Tracking of Solar Energy Harvester to Energize Seismic Node: A Case of NNNSS Nodes

  Duncan, D., Zungeru, A. M., Mangwala, M., Diarra, B., Chuma, J. & Bokani, M., Nov 2019, 2019 IEEE Conference on Sustainable Utilization and Development in Engineering and Technologies, CSUDET 2019. Institute of Electrical and Electronics Engineers Inc., p. 224-229 6 p. 9214628. (2019 IEEE Conference on Sustainable Utilization and Development in Engineering and Technologies, CSUDET 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

  • Solar Energy
  • solar energy
  • Harvesters
  • Energy harvesting
  • Node

• Environmental impact assessment for setting up a biogas plant

  Manyuchi, M. M., Mbohwa, C. & Muzenda, E., 2018, Proceedings of the International Conference on Industrial Engineering and Operations Management, IEOM 2018. IEOM Society, p. 25-30 6 p. (Proceedings of the International Conference on Industrial Engineering and Operations Management; vol. 2018-March).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Environmental impact assessments
  • Environmental Impact Assessment
  • Biogas
  • Sewage Sludge
  • Safety

• Environmental remediation through the application of the vermicomposting technology for bio waste management

  Manyuchi, M. M., Mbohwa, C. & Muzenda, E., Mar 2020, Proceedings of the International Conference on Industrial Engineering and Operations Management. March ed. IEOM Society, p. 2918-2924 7 p. (Proceedings of the International Conference on Industrial Engineering and Operations Management; vol. 0, no. March).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

  • Environmental Restoration and Remediation
  • Remediation
  • Fertilizers
  • Waste management
  • Waste Management

• Environmental sustainability: Multi-criteria decision analysis for resource recovery from organic fraction of municipal solid waste

  Masebinu, S. O., Akinlabi, E. T., Muzenda, E., Mbohwa, C., Aboyade, A. O. & Mahlatsi, T., Dec 27 2016, 2016 International Conference on Industrial Engineering and Engineering Management, IEEM 2016. IEEE Computer Society, Vol. 2016-December. p. 1543-1547 5 p. 7798136

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Resource Recovery
  • Municipal Solid Waste
  • Municipal solid waste
  • Multi-criteria Decision Analysis
  • Decision theory
  5 Citations (Scopus)

• Erosion-wear Behaviour of 304 Stainless Steel Reinforced with TiN at Elevated Temperatures

  Mafafo, R. M., Obadele, B. A., Pilotti, B., Tuckart, W. R. & Olubambi, P. A., Aug 20 2020, Trends in Manufacturing and Engineering Management - Select Proceedings of ICMechD 2019. Vijayan, S., Subramanian, N. & Sankaranarayanasamy, K. (eds.). Springer Nature, Singapore, p. 183-191 9 p. (Lecture Notes in Mechanical Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Erosion
  • Austenitic stainless steel
  • Wear of materials
  • Electric sparks
  • Plasmas

• Estimating the efficiency of Information Technology for Domain-Specific Mathematical Modelling

  Mezhuyev, V., Abdul Majid, M. & Samikannu, R., Aug 24 2015, I4CT 2015 - 2015 2nd International Conference on Computer, Communications, and Control Technology, Art Proceeding. Institute of Electrical and Electronics Engineers Inc., p. 289-293 5 p. 7219583

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Information technology
  • Semantics
  1 Citation (Scopus)

• Estimation of Optical Wireless Communication Link Availability Using Meteorological Visibility Data for Major Locations in South Africa

  Kolawole, O., Afullo, T. & Mosalaosi, M., Jun 2019, 2019 PhotonIcs and Electromagnetics Research Symposium - Spring, PIERS-Spring 2019 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 319-325 7 p. 9017842. (Progress in Electromagnetics Research Symposium; vol. 2019-June).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Fog
  • Visibility
  • Telecommunication links
  • Availability
  • Scattering

• Eutrophication impact potential of solid waste management options in harare

  Nhubu, T., Mbohwa, C. & Muzenda, E., 2020, Wastes: Solutions, Treatments and Opportunities III - Selected papers from the 5th International Conference Wastes: Solutions, Treatments and Opportunities, 2019. Vilarinho, C., Castro, F., Gonçalves, M. & Fernando, A. L. (eds.). CRC Press/Balkema, p. 360-366 7 p. (Wastes: Solutions, Treatments and Opportunities III - Selected papers from the 5th International Conference Wastes: Solutions, Treatments and Opportunities, 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • solid waste
  • waste management
  • eutrophication
  • waste treatment
  • municipal solid waste
  2 Citations (Scopus)

• Evaluation and analysis of Botswana gravel road condition for district transportation networks monitoring

  Oladele, A. S., 2014, Advances in Transportation. Vol. 505-506. p. 740-744 5 p. (Applied Mechanics and Materials; vol. 505-506).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Gravel roads
  • Monitoring
  • Deterioration
  • Gravel
  • Network performance

• Evaluation of cathodic protection performance of carbon steel pipeline buried in soil: A review

  Mahlobo, M. G. R., Mjwana, P., Tladi, M. N. A., Obadele, B. A., Olubambi, P. A. & Refait, P., Apr 17 2018, 2018 IEEE 9th International Conference on Mechanical and Intelligent Manufacturing Technologies, ICMIMT 2018. Institute of Electrical and Electronics Engineers Inc., p. 37-43 7 p. (2018 IEEE 9th International Conference on Mechanical and Intelligent Manufacturing Technologies, ICMIMT 2018; vol. 2018-January).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Cathodic protection
  • Carbon steel
  • Soils
  • Pipelines
  • Voltammetry
  2 Citations (Scopus)

• Evaluation of Course Management System for a University

  Masizana-Katongo, A., Mpoeleng, D. & Nkgau, T. Z., 2007, Proceedings of the 37th Conference of the Southern African Computer Lecturer Association. p. 241-245 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Evaluation of heavy metals in platinum tailing dam site

  Nkobane, M. P., Afolabi, A. S. & Abdulkareem, A. S., Jan 1 2015, WCE 2015 - World Congress on Engineering 2015. Ao, S. I., Gelman, L., Gelman, L., Hukins, D. W. L., Hunter, A., Korsunsky, A. M., Ao, S. I. & Ao, S. I. (eds.). Newswood Limited, Vol. 2218. p. 967-971 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Tailings
  • Heavy metals
  • Platinum
  • Dams
  • Metals

• Evaluation of natural flocculants for conventional water treatment

  Afolabi, A. S., Sigwadi, R., Abdulkareem, A. S. & Mateescu, C. M., Jan 31 2013, Mechanical Materials and Manufacturing Engineering II. p. 298-303 6 p. (Applied Mechanics and Materials; vol. 248).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Water treatment
  • Polyelectrolytes
  • Seed
  • Water
  • Aluminum sulfate

• Evaluation of Potential Substrates for Biogas Production via Anaerobic Digestion: A Review

  Sibiya, N. T., Muzenda, E. & Mbohwa, C., 2017, Proceedings of the World Congress on Engineering and Computer Science 2017. Ao, S. I., Douglas, C. & Grundfest, W. S. (eds.). Vol. 2. p. 583-588 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

  • anaerobic digestion
  • biogas
  • methane
  • substrate
  • evaluation
  1 Citation (Scopus)

• Evaluation of Process Parameters Influence on the Mechanical Properties of RF Magnetron Sputtered TiC Thin-Film Coating

  Abegunde, O. O., Akinlabi, E. T. & Oladijo, O. P., 2021, Trends in Manufacturing and Engineering Management - Select Proceedings of ICMechD 2019. Vijayan, S., Subramanian, N. & Sankaranarayanasamy, K. (eds.). Springer Nature, Singapore, p. 145-155 11 p. (Lecture Notes in Mechanical Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Thin films
  • Coatings
  • Mechanical properties
  • Curbs
  • Sputtering

• Evaluation of solar water heating systems in Botswana

  Oladiran, M. T. & Ossenburg, E., 2013, Advances in Materials and Systems Technologies IV. Vol. 824. p. 459-466 8 p. (Advanced Materials Research; vol. 824).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Solar water heaters
  • Heating
  • Water
  • Inspection
  • Systems analysis

• Evaluation of wear and corrosion behaviour of hybrid sintered ti6al4v alloy

  Ayodele, O. O., Awotunde, M. A., Shongwe, M. B., Adegbenjo, A. O., Babalola, B. J., Obadele, B. A. & Olubambi, P. A., Jan 1 2019, Key Engineering Materials IX. Korsunsky, A. M. (ed.). Trans Tech Publications Ltd, p. 321-326 6 p. (Key Engineering Materials; vol. 821 KEM).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • titanium alloy (TiAl6V4)
  • Corrosion
  • Wear of materials
  • Potentiodynamic polarization
  • Spark plasma sintering

• Evolution of microstructure and wear properties of aluminum thin films with sputtering substrate temperature

  Mwema, F. M., Akinlabi, E. T., Oladijo, O. P. & Dutta Majumdar, J., May 13 2019, 2019 IEEE 10th International Conference on Mechanical and Intelligent Manufacturing Technologies, ICMIMT 2019. Institute of Electrical and Electronics Engineers Inc., p. 31-36 6 p. 8712046. (2019 IEEE 10th International Conference on Mechanical and Intelligent Manufacturing Technologies, ICMIMT 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Sputtering
  • Aluminum
  • Thin films
  • Wear of materials
  • Substrates
  3 Citations (Scopus)

• Exergy and economic analyses of a hybrid solid oxide fuel cell by computer simulation

  Bilyaminu, S., Yenkwo, K. C., Saka, A. A. & Afolabi, A. S., Jan 1 2015, WCE 2015 - World Congress on Engineering 2015. Ao, S. I., Gelman, L., Gelman, L., Hukins, D. W. L., Hunter, A., Korsunsky, A. M., Ao, S. I. & Ao, S. I. (eds.). Newswood Limited, Vol. 2218. p. 785-790 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Exergy
  • Solid oxide fuel cells (SOFC)
  • Methane
  • Economics
  • Ethanol

• Experimental and calculated THz spectra of analgesics

  Lepodise, L. M., Lewis, R. A. & Horvat, J., Oct 12 2017, 2017 42nd International Conference on Infrared, Millimeter, and Terahertz Waves, IRMMW-THz 2017. IEEE Computer Society, 8067049. (International Conference on Infrared, Millimeter, and Terahertz Waves, IRMMW-THz).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Density functional theory
  • Absorption spectra
  • Benzene

• Experimental view of the sub-tropical clayey soils-acid mine drainage interactions

  Agbenyeku, E. E. O., Muzenda, E. & Msibi, I. M., Jan 1 2016, WCECS 2016 - World Congress on Engineering and Computer Science 2016. Grundfest, W. S., Douglas, C. & Ao, S. I. (eds.). Newswood Limited, Vol. 2226. p. 612-616 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Drainage
  • Acids
  • Soils
  • Minerals
  • Surface waters

• Exploring the effect of rf power in sputtering of aluminum thin films-a microstructure analysis

  Mwema, F. M., Akinlabi, E. T. & Oladijo, O. P., 2019, 4th North American IEOM Conference. IEOM 2019. IEOM Society, p. 745-750 6 p. (Proceedings of the International Conference on Industrial Engineering and Operations Management).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Sputtering
  • Microstructure
  • Aluminum
  • Thin films
  • Fractal dimension

• Extending the bargain region using beamforming design under mixed QoS constraints

  Basutli, B. & Lambotharan, S., Sep 9 2015, 2015 IEEE International Conference on Digital Signal Processing, DSP 2015. Institute of Electrical and Electronics Engineers Inc., Vol. 2015-September. p. 511-515 5 p. 7251925

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Beamforming
  • Quality of service
  • Cost functions
  1 Citation (Scopus)

• Extraction of buildings in informal settlement areas from high-resolution data

  Mayunga, S. D., Zhang, Y. & Coleman, D. J., 2005, American Society for Photogrammetry and Remote Sensing - Annual Conference 2005 - Geospatial Goes Global: From Your Neighborhood to the Whole Planet. Vol. 2. p. 691-702 12 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Photogrammetry
  • Urban planning
  • Geographic information systems
  • Computer vision
  • Casting

• Fabrication and characterization of spray pyrolysed inxsy thin films for cuins2 solar cells

  Maabong, K. & Muiva, C., 2010, Proceedings of the 3rd IASTED African Conference on Power and Energy Systems, AfricaPES 2010. p. 22-28 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Solar cells
  • sprayers
  • Thin films
  • Indium
  • solar cells
  1 Citation (Scopus)

• Fabrication of AISI 304 Austenitic Stainless Steels with TiN Addition Using Spark Plasma Sintering Method

  Obadele, B. A., Mafafo, R. M., Tuckart, W. R. & Olubambi, P. A., 2021, Trends in Manufacturing and Engineering Management - Select Proceedings of ICMechD 2019. Vijayan, S., Subramanian, N. & Sankaranarayanasamy, K. (eds.). Springer Nature, Singapore, p. 681-689 9 p. (Lecture Notes in Mechanical Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Spark plasma sintering
  • Sintering
  • Austenitic stainless steel
  • Fabrication
  • Electric discharges

• Fabrication of paper based microfluidic devices

  Govindasamy, K., Potgieter, S., Land, K. & Muzenda, E., 2012, Proceedings of the World Congress on Engineering 2012, WCE 2012. Korsunsky, A. M., Gelman, L., Hunter, A., Ao, S. I. & Hukins, D. WL. (eds.). Newswood Limited, p. 1427-1432 6 p. (Lecture Notes in Engineering and Computer Science; vol. 3).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Waxes
  • Microfluidics
  • Linewidth
  • Fabrication
  • Melting

• Factorial design optimization of monometallic (cobalt) catalyst on calcium carbonate support for carbon nanotubes synthesis

  Abdulkareem, A. S., Suleiman, B., Ajamah, S. O. E., Mohammed, I. A., Bankole, M. T. & Afolabi, A. S., Jan 1 2016, WCECS 2016 - World Congress on Engineering and Computer Science 2016. Grundfest, W. S., Douglas, C. & Ao, S. I. (eds.). Newswood Limited, Vol. 2226. p. 570-575 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Catalyst supports
  • Calcium carbonate
  • Cobalt
  • Carbon nanotubes
  • Catalysts
  1 Citation (Scopus)

• Factors influencing chemical absorption of C0₂ and H₂S in biogas purification: A review

  Maile, O. I., Tesfagiorgis, H. B. & Muzenda, E., Jan 1 2015, WCECS 2015 - World Congress on Engineering and Computer Science 2015. Douglas, C., Burgstone, J., Grundfest, W. S., Burgstone, J., Douglas, C. & Ao, S. I. (eds.). Newswood Limited, Vol. 2220. p. 619-622 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Biogas
  • Purification
  • Temperature
  • Gases
  • Sodium hydroxide
  2 Citations (Scopus)

• Fading channel characterization over frequency hopping spread spectrum

  Yahya, A., Sidek, O. & Fadzli, M., Dec 1 2008, WMSCI 2008 - The 12th World Multi-Conference on Systemics, Cybernetics and Informatics, Jointly with the 14th International Conference on Information Systems Analysis and Synthesis, ISAS 2008 - Proc.. Vol. 3. p. 299-302 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Frequency hopping
  • Fading channels
  • Multipath fading
  • Radio systems
  • Power control

• Feasibility of Genetic Algorithms in 2D Ultrasound Array Optimization

  Diarra, B., Samikannu, R., Vray, D., Cachard, C., Chuma, J., Yahya, A. & Liebgott, H., Dec 17 2018, 2018 IEEE International Ultrasonics Symposium, IUS 2018. IEEE Computer Society, 8579952. (IEEE International Ultrasonics Symposium, IUS; vol. 2018-October).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • simulated annealing
  • genetic algorithms
  • optimization
  • systems analysis
  • resources
  1 Citation (Scopus)

• Feature weighting for Case-based reasoning software project effort estimation

  Sigweni, B., 2014, 18th International Conference on Evaluation and Assessment in Software Engineering, EASE 2014. Association for Computing Machinery, a54

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Case based reasoning
  • Software engineering
  • Experiments
  5 Citations (Scopus)

• Feature weighting techniques for CBR in software effort estimation studies: A review and empirical evaluation

  Sigweni, B. & Shepperd, M., Jan 1 2014, 10th International Conference on Predictive Models in Software Engineering, PROMISE 2014. Association for Computing Machinery, p. 32-41 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Case based reasoning
  • Software engineering
  18 Citations (Scopus)

• Flame -flexible and accurate motif detector for continuous pattern discovery in sequence data sets

  Selvaraj, R., Kuthadi, V. M. & Ranjan, A., Jan 1 2012, Proceedings of the IADIS International Conference Information Systems 2012, IS 2012. Isaias, P., Rodrigues, L., Nunes, M. B. & Powell, P. (eds.). IADIS, p. 362-367 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Detectors
  • Bioinformatics

• Flow instabilities and heat transfer in buoyancy driven flows of inelastic non-Newtonian fluids in inclined rectangular cavities

  Siginer, D. & Khezzar, L., Dec 1 2010, ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting Collocated with 8th International Conference on Nanochannels, Microchannels, and Minichannels, FEDSM2010. PARTS A, B AND C ed. Vol. 1. p. 1411-1420 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Prandtl number
  • Buoyancy
  • Heat transfer
  • Fluids
  • Aspect ratio

• Flows in Manufacturing Processes: Introduction

  Siginer, D. A., Watanabe, K., Bourgin, P., Iwamoto, J. & Bakhtiyarov, S. I., Dec 1 2003, Proceedings of the 4th ASME/JSME Joint Fluids Engineering Conference: Volume 2, Part C, Symposia. Ogut, A., Tsuji, Y., Kawahashi, M., Ogut, A., Tsuji, Y. & Kawahashi, M. (eds.). Vol. 2 C. 1 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Fractal Analysis of Thin Films Surfaces: A Brief Overview

  Mwema, F. M., Akinlabi, E. T. & Oladijo, O. P., 2020, Advances in Material Sciences and Engineering, ICMMPE 2018. Awang, M., Emamian, S. S. & Yusof, F. (eds.). Springer India, p. 251-263 13 p. (Lecture Notes in Mechanical Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Fractals
  • Thin films
  • Surface roughness
  • Fractal dimension
  • Power spectral density
  4 Citations (Scopus)

• From Crash Tolerance to Authenticated Byzantine Tolerance: A Structured Approach, the Cost and Benefits

  Mpoeleng, D., Ezhilchelvan, P. & Speirs, N., 2003, Proceedings of the International Conference on Dependable Systems and Networks. p. 227-236 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Common object request broker architecture (CORBA)
  • Middleware
  • Semantics
  • Commercial off-the-shelf
  • Communication
  13 Citations (Scopus)