Find Research outputs — BOTSWANA INTERNATIONAL UNIVERSITY OF SCIENCE & TECHNOLOGY

Effect of titanium addition on the microstructure, electrical conductivity and mechanical properties of copper by using SPS for the preparation of Cu-Ti alloys

Eze, A. A., Jamiru, T., Sadiku, E. R., Durowoju, M. Ọ., Kupolati, W. K., Ibrahim, I. D., Obadele, B. A., Olubambi, P. A. & Diouf, S., Mar 2018, In: Journal of Alloys and Compounds. 736, p. 163-171 9 p.

Research output: Contribution to journal › Article › peer-review

20 Citations (Scopus)

Effect of TiN and TiCN additions on spark plasma sintered Ti–6Al–4V

Falodun, O. E., Obadele, B. A., Oke, S. R., Ige, O. O. & Olubambi, P. A., Jan 1 2018, (Accepted/In press) In: Particulate Science and Technology.

Research output: Contribution to journal › Article › peer-review

3 Citations (Scopus)

Effect of TiN addition on corrosion behavior of spark plasma sintered 304L austenitic stainless steel in chloride media

Olukayode Akinwamide, S., Jeremiah Akinribide, O., Mafafo, M., Phumlani, M., Abiodun Obadele, B., Tolulope Abe, B. & Apata Olubambi, P., Nov 2019, In: Materials Today: Proceedings.

Research output: Contribution to journal › Article › peer-review

Effect of time of initiation of feeding after hatching and influence of dietary lysine supplementation on productivity and carcass characteristics of Ross 308 broiler chickens in South Africa

Mbajiorgu, C. A., Ng'ambi, J. W. & Norris, D., Oct 2007, In: Livestock Research for Rural Development. 19, 10

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

Effect of time of initiation of feeding after hatching and influence of dietary ascorbic acid supplementation on productivity, mortality and carcass characteristics of ross 308 broiler chickens in South Africa

Mbajiorgu, C. A., Ng'ambi, J. W. & Norris, D., Jan 1 2007, In: International Journal of Poultry Science. 6, 8, p. 583-591 9 p.

Research output: Contribution to journal › Article › peer-review

9 Citations (Scopus)

Effect of thermal treatment on mechanically milled cobalt powder

Bolokang, A. S., Phasha, M. J., Camagu, S. T., Motaung, D. E. & Bhero, S., Mar 1 2012, In: International Journal of Refractory Metals and Hard Materials. 31, p. 258-262 5 p.

Research output: Contribution to journal › Article › peer-review

12 Citations (Scopus)

Effect of Thermal & Alkali Treatment on Pterocarpus Angolensis (Mukwa) Wood Flour

Setswalo, K., Namoshe, M., Kutua, S., Oladijo, O. P. & Samson, B., Jan 1 2017, In: Procedia Manufacturing. 7, p. 205-210 6 p.

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

Effect of the operation parameters on the Fischer Tropsch synthesis process using different reactors

Makhura, E., Rakereng, J., Rapoo, O. & Danha, G., 2019, In: Procedia Manufacturing. 35, p. 349-355 7 p.

Research output: Contribution to journal › Conference article › peer-review

Open Access

Effect of tempering temperature and time on the corrosion behaviour of 304 and 316 austenitic stainless steels in oxalic acid

Afolabi, A. S., Potgieter, J. H., Abdulkareem, A. S. & Fungura, N., Jul 2011, In: World Academy of Science, Engineering and Technology. 79, p. 87-91 5 p.

Research output: Contribution to journal › Article › peer-review

3 Citations (Scopus)

Effect of temperature on specific retention volumes of selected volatile organic compounds using the gas - liquid chromatographic technique revisited

Muzenda, E. & Afolabi, A. S., 2010, In: World Academy of Science, Engineering and Technology. 70, p. 729-733 5 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Effect of tanniniferous Acacia karroo leaf meal inclusion level on feed intake, digestibility and live weight gain of goats fed a Setaria verticillata grass hay-based diet

Brown, D., Ng’ambi, J. W. & Norris, D., Feb 15 2017, (Accepted/In press) In: Journal of Applied Animal Research. p. 1-6 6 p.

Research output: Contribution to journal › Article › peer-review

6 Citations (Scopus)

Effect of Supertargeting and Non Isothermal Stream Mixing in Heat Exchanger Network Design Using Modified Pinch Analysis

Azeez, O., Blessing, O., Onyinye, E. & Hassan, A., May 2019, In: International Journal of Energy and Environmental Science. 4, 1, p. 18-26 9 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Effect of subthreshold slope on the sensitivity of nanoribbon sensors

Sun, K., Zeimpekis, I., Hu, C., Ditshego, N. M. J., Thomas, O., De Planque, M. R. R., Chong, H. M. H., Morgan, H. & Ashburn, P., Jun 3 2016, In: Nanotechnology. 27, 28, 285501.

Research output: Contribution to journal › Article › peer-review

12 Citations (Scopus)

Effect of substrate type on the fractal characteristics of AFM images of sputtered aluminium thin films

Mwema, F. M., Akinlabi, E. T. & Oladijo, O. P., 2020, In: Medziagotyra. 26, 1, p. 49-57 9 p.

Research output: Contribution to journal › Article › peer-review

Open Access

1 Citation (Scopus)

Effect of substrates on the microstructure of thermally sprayed WC-4.88 wt% Co coatings

Oladijo, O. P., Venter, A. M., Cornish, L. A., Sacks, N. & Shrivastava, S., 2010, Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010. European Powder Metallurgy Association (EPMA), Vol. 3.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Effect of substrate on the 3 body abrasion wear of HVOF WC-17 wt.% Co coatings

Oladijo, O. P., Sacks, N., Cornish, L. A. & Venter, A. M., Nov 1 2012, In: International Journal of Refractory Metals and Hard Materials. 35, p. 288-294 7 p.

Research output: Contribution to journal › Article › peer-review

15 Citations (Scopus)

Effect of substrate moisture on the weatherability of surface treatment for High-Performance Concrete (HPC)

Bader, T., Unterberger, S. H. & Lackner, R., 2017, In: Cement and Concrete Composites. 83, p. 57-65 9 p.

Research output: Contribution to journal › Article › peer-review

Open Access

4 Citations (Scopus)

Effect of starting powder particle size and heating rate on spark plasma sintering of Fe-Ni alloys

Shongwe, M. B., Ramakokovhu, M. M., Diouf, S., Durowoju, M. O., Obadele, B. A., Sule, R., Lethabane, M. L. & Olubambi, P. A., Sep 5 2016, In: Journal of Alloys and Compounds. 678, p. 241-248 8 p.

Research output: Contribution to journal › Article › peer-review

40 Citations (Scopus)

Effect of soybean meal supplementation on pre-and post-partum productivity of Angora goats in communal rangelands of Molimo-Nthuse in Lesotho

Ng'ambi, J. W., Khitsane, L., Norris, D. & Mbajiorgu, C. A., Jan 2008, In: Livestock Research for Rural Development. 20, 1

Research output: Contribution to journal › Article › peer-review

Effect of solution composition on anatase to rutile transformation of sprayed TiO₂ thin films

Juma, A. O., Acik, I. O., Mikli, V., Mere, A. & Krunks, M., Jan 1 2015, In: Thin Solid Films. 594, p. 287-292 6 p.

Research output: Contribution to journal › Article › peer-review

13 Citations (Scopus)

Effect of Solids Concentration in Cow Dung on Biogas Yield

Makhura, E. P., Muzenda, E. & Lekgoba, T., Nov 2019, Proceedings of 2019 7th International Renewable and Sustainable Energy Conference, IRSEC 2019. El Hibaoui, A., Essaaidi, M. & Zaz, Y. (eds.). Institute of Electrical and Electronics Engineers Inc., 9078218. (Proceedings of 2019 7th International Renewable and Sustainable Energy Conference, IRSEC 2019).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Effect of Sn addition on the optical gap and far-infrared reflectivity spectra of amorphous Sb-Se films

Kumar, P., Thangaraj, R. & Sathiaraj, T. S., Jun 23 2010, In: Journal of Non-Crystalline Solids. 356, 31-32, p. 1611-1613 3 p.

Research output: Contribution to journal › Article › peer-review

4 Citations (Scopus)

Effect of sintering parameters on densification and microstructural evolution of nano-sized titanium nitride reinforced titanium alloys

Falodun, O. E., Obadele, B. A., Oke, S. R., Maja, M. E. & Olubambi, P. A., Mar 5 2018, In: Journal of Alloys and Compounds. 736, p. 202-210 9 p.

Research output: Contribution to journal › Article › peer-review

35 Citations (Scopus)

Effect of silicon nitride (Si₃N₄) addition on the mechanical and tribological performance of al-fe-si alloy (AA8011)

Fayomi, J., Popoola, A. P. I., Popoola, O. M. & Oladijo, O. P., 2020, Advanced Materials and Processing Technologies II. Zhao, Y. (ed.). Trans Tech Publications Ltd, Vol. 982. p. 34-38 5 p. (Materials Science Forum; vol. 982 MSF).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

1 Citation (Scopus)

Effect of sex, level and period of feed restriction during the starter stage on productivity and carcass characteristics of Ross 308 broiler chickens in South Africa

Novele, D. J., Ng'Ambi, J. W., Norris, D. & Mbajiorgu, C. A., Jul 1 2008, In: International Journal of Poultry Science. 7, 6, p. 530-537 8 p.

Research output: Contribution to journal › Article › peer-review

11 Citations (Scopus)

Effect of scan rate on AFM imaging on 3D surface stereometrics of aluminum films

Mwema, F. M., Akinlabi, E. T. & Oladijo, O. P., 2019, In: Materials Today: Proceedings. 18, Part 7, p. 2315-2321 7 p.

Research output: Contribution to journal › Conference article › peer-review

1 Citation (Scopus)

Effect of roughness shape on heat transfer and flow friction characteristics of solar air heater with roughened absorber plate

Chaube, A., Sahoo, P. K. & Solanki, S. C., 2006, p. 43-51. 9 p.

Research output: Contribution to conference › Paper › peer-review

Open Access

9 Citations (Scopus)

Effect of reverse flotation on magnetic separation concentrates

Bada, S. O., Afolabi, A. S. & Makhula, M. J., Aug 1 2012, In: International Journal of Minerals, Metallurgy and Materials. 19, 8, p. 669-674 6 p.

Research output: Contribution to journal › Article › peer-review

8 Citations (Scopus)

Effect of relay location on two-way DF and AF relay for multi-user system in LTE-A cellular networks

Aldhaibani, J. A., Yahya, A., Ahmad, R. B., Omar, N. & Ali, Z. G., Sep 2 2013, BEIAC 2013 - 2013 IEEE Business Engineering and Industrial Applications Colloquium. p. 380-385 6 p. 6560153

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

17 Citations (Scopus)

Effect of pulp chemistry and solids on a froth bubble size measurement method

Bhondayi, C., Moys, M. H. & Danha, G., Sep 1 2016, In: Powder Technology. 297, p. 202-210 9 p.

Research output: Contribution to journal › Article › peer-review

5 Citations (Scopus)

Effect of processing technique on the mechanical properties of a functionalized superhydrophobic silane

Baruwa, A. D., Akinlabi, E. T., Oladijo, O. P., Dutta-Majumdar, J. & Krishna, S., 2019, Advanced Manufacturing. American Society of Mechanical Engineers(ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 2A-2019).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Effect of processing parameters on the density and microstructure of direct laser sintered Al-12Si powders

Olakanmi, E. O., Cochrane, R. F. & Dalgarno, K. W., Jan 1 2007, p. 299-311. 13 p.

Research output: Contribution to conference › Paper › peer-review

Open Access

Effect of pre-weaning selection on estimates of genetic parameters and breeding values for post-weaning growth rate of beef bulls on test

Mashiloane, M. L., Nephawe, K. A., Maiwashe, A., Norris, D. & Ngambi, J. W., Dec 1 2009, In: Tropical Animal Health and Production. 41, 8, p. 1723-1730 8 p.

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

Effect of population structure and underlying magnitude of dominance genetic effects on the estimation of additive and dominance genetic variances

Norris, D., Mao, I. L. & Coetzee, R. J., Jan 1 2002, In: South African Journal of Animal Sciences. 32, 2, p. 113-121 9 p.

Research output: Contribution to journal › Article › peer-review

6 Citations (Scopus)

Effect of polyethylene glycol 4000 supplementation on the performance of indigenous Pedi goats fed different levels of Acacia nilotica leaf meal and ad libitum Buffalo grass hay

Motubatse, M. R., Ng'ambi, J. W., Norris, D. & Malatje, M. M., Apr 1 2008, In: Tropical Animal Health and Production. 40, 3, p. 229-238 10 p.

Research output: Contribution to journal › Article › peer-review

8 Citations (Scopus)

Effect of pH on the floatability of base metal sulphides PGMs

Afolabi, A. S., Muzenda, E. & Abdulkareem, S. A., Jan 1 2013, IAENG Transactions on Engineering Technologies - Special Edition of the World Congress on Engineering and Computer Science 2011. p. 239-248 10 p. (Lecture Notes in Electrical Engineering; vol. 170 LNEE).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Effect of phase separation on optical and electrical properties of Sn-Sb-Se glassy films

Kumar, P., Thangaraj, R. & Sathiaraj, T. S., Jul 1 2009, In: Physica Status Solidi (A) Applications and Materials Science. 206, 7, p. 1465-1470 6 p.

Research output: Contribution to journal › Article › peer-review

3 Citations (Scopus)

Effect of particle size and alkali-laccase on the properties of pterocarpus angolensis (Mukwa) wood flour

Setswalo, K., Oladijo, O. P., Namoshe, M., Akinlabi, E. T. & Mokoba, M., 2019, In: Procedia Manufacturing. 35, p. 465-470 6 p.

Research output: Contribution to journal › Conference article › peer-review

Open Access

Effect of oxygen and micro-cracking on the flotation of low grade nickel sulphide ore

Muzenda, E. & Afolabi, A. S., 2010, In: World Academy of Science, Engineering and Technology. 4, 9, p. 615-620 6 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Effect of operating pressure on the application of multiple cyclones in dense medium separation (DMS) plant

Muzenda, E., Abdulkareem, A. S., Afolabi, A. S. & Mateescu, C., Jan 1 2012, In: Particulate Science and Technology. 30, 1, p. 92-101 10 p.

Research output: Contribution to journal › Article › peer-review

Effect of O₂/Ar flow ratio on Ga and Al co-doped ZnO thin films by rf sputtering for optoelectronic device fabrication

Muchuweni, E., Sathiaraj, T. S. & Nyakotyo, H., Nov 2017, In: Materials Research Bulletin. 95, p. 123-128 6 p.

Research output: Contribution to journal › Article › peer-review

12 Citations (Scopus)

Effect of nozzle inclination on jet-impingement heat transfer in a confined cross-flow

Ward, J., Oladiran, M. T. & Hammond, G. P., Dec 1 1991, Fundamentals of Forced Convection Heat Transfer. Publ by ASME, Vol. 181. p. 25-31 7 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

6 Citations (Scopus)

Effect of non-Newtonian characteristics of blood on magnetic targeting in the impermeable micro-vessel

Shaw, S., Murthy, P. V. S. N. & Pradhan, S. C., Apr 1 2010, In: Journal of Magnetism and Magnetic Materials. 322, 8, p. 1037-1043 7 p.

Research output: Contribution to journal › Article › peer-review

31 Citations (Scopus)

Effect of nickel addition on densification, microstructure and wear behaviour of spark plasma sintered CP-titanium

Rominiyi, A. L., Shongwe, M. B., Ogunmuyiwa, E. N., Babalola, B. J., Lepele, P. F. & Olubambi, P. A., Jan 15 2020, In: Materials Chemistry and Physics. 240, 9 p., 122130.

Research output: Contribution to journal › Article › peer-review