Find Research outputs

Influence of experimental factors and film thickness on the measured critical load in the nanoscratch test

Beake, B. D., Ogwu, A. A. & Wagner, T., May 15 2006, In: Materials Science and Engineering A. 423, 1-2, p. 70-73 4 p.

Research output: Contribution to journal › Article › peer-review

39 Citations (Scopus)

Influence of external magnetic fields on the growth of alloy nanoclusters

Einax, M., Heinrichs, S., Maass, P., Majhofer, A. & Dieterich, W., 2007, In: Journal of Physics Condensed Matter. 19, 8

Research output: Contribution to journal › Article › peer-review

10 Citations (Scopus)

Influence of Heat Treatment on Microstructure and Mechanical Properties of Ni-Fe-Co Ternary Alloy Prepared via Spark Plasma Sintering

Bopape, I. M. C., Shongwe, M. B., Ogunmuyiwa, E. N., Rominiyi, A. L. & Jeje, S. O., Nov 8 2019, In: IOP Conference Series: Materials Science and Engineering. 655, 1, 012030.

Research output: Contribution to journal › Conference article › peer-review

Open Access

Influence of herbicides-pyroligneous acids mixtures on some soil properties, growth and grain quality of paddy rice

Seo, P. D., Ultra Jr, V., Rubenecia, M. R. U. & Lee, S. C., 2015, In: International Journal of Agriculture and Biology. 17, 3, p. 499-506 8 p.

Research output: Contribution to journal › Article › peer-review

Open Access

2 Citations (Scopus)

Influence of landfill gas on the microdistribution of grass establishment through natural colonization

Trotter, D. H. & Cooke, J. A., Mar 2005, In: Environmental Management. 35, 3, p. 303-310 8 p.

Research output: Contribution to journal › Article › peer-review

7 Citations (Scopus)

Influence of low-tannin sorghum on performance and bone morphometrics of male Ross 308 broilers aged 1 - 42 days

Manyelo, T. G., Ng'ambi, J. W., Norris, D. & Mabelebele, M., 2019, In: South African Journal of Animal Sciences. 49, 3, p. 477-484 8 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Influence of mycorrhiza and fly ash on the survival, growth and heavy metal accumulation in three Acacia species grown in Cu–Ni mine soil

Ultra Jr, V. & Manyiwa, T., 2020, In: Environmental Geochemistry and Health. 17 p.

Research output: Contribution to journal › Article › peer-review

3 Citations (Scopus)

Influence of nanocrystalline nickel powder on oxidation resistance of spark plasma sintered Ni-17Cr6.5Co1.2Mo6Al4W7.6Ta alloy

Babalola, B. J., Maledi, N., Shongwe, M. B., Bodunrin, M. O., Obadele, B. A. & Olubambi, P. A., Mar 2020, In: Journal of King Saud University - Engineering Sciences. 32, 3, p. 198-204 7 p.

Research output: Contribution to journal › Article › peer-review

Open Access

9 Citations (Scopus)

Influence of open porosity, hydration products and extent of hydration on the strength of desilicated lime fly ash composites

Falayi, T., Okonta, F. N. & Ntuli, F., 2017, In: Medziagotyra. 23, 2, p. 150-155 6 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Influence of phase composition and microstructure on corrosion behavior of laser based Ti–Co–Ni ternary coatings on Ti–6Al–4V alloy

Adesina, O. S., Obadele, B. A., Farotade, G. A., Isadare, D. A., Adediran, A. A. & Ikubanni, P. P., Jun 25 2020, In: Journal of Alloys and Compounds. 827, 154245.

Research output: Contribution to journal › Review article › peer-review

7 Citations (Scopus)

Influence of post-heat treatment on microstructure, mechanical, and wear properties of maraging steel fabricated using direct metal laser sintering technique

Subramaniyan, A. K., Anigani, S. R., Mathias, S., Pathania, A., Raghupatruni, P. & Yadav, S. S., 2021, (Accepted/In press) In: Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications.

Research output: Contribution to journal › Article › peer-review

2 Citations (Scopus)

Influence of post-processing techniques on the microstructure, properties and surface integrity of Al[sbnd]Si[sbnd]Mg alloy processed by laser powder bed fusion technique

Subramaniyan, A. K., Reddy, A. S., Mathias, S., Shrivastava, A. & Raghupatruni, P., Nov 15 2021, In: Surface and Coatings Technology. 425, 127679.

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

Influence of pyrolyzed sludge use as an adsorbent in removal of selected trace metals from wastewater treatment

Matheri, A. N., Eloko, N. S., Ntuli, F. & Ngila, J. C., Sep 2020, In: Case Studies in Chemical and Environmental Engineering. 2, 100018.

Research output: Contribution to journal › Article › peer-review

Open Access

4 Citations (Scopus)

Influence of relativistic dynamics and density-dependent corrections on the induced polarization and analyzing power for exclusive 1s1/2 proton knockout in C12

Hillhouse, G. C. & Noro, T., Jan 1 2006, In: Physical Review C - Nuclear Physics. 74, 6, 064608.

Research output: Contribution to journal › Article › peer-review

8 Citations (Scopus)

Influence of RF power on the stoichiometry, optical, and electrical properties of chromium oxide coatings prepared by reactive magnetron sputtering

Oje, A. M., Ogwu, A. A., Oje, A. I., Tsendzughul, N. & Ur Rahman, S., Mar 22 2019, In: Materials Research Express. 6, 6, 066408.

Research output: Contribution to journal › Article › peer-review

5 Citations (Scopus)

Influence of scoria and pumice on key performance indicators of Portland cement concrete

Mboya, H. A., Njau, K. N., Mrema, A. L. & King'ondu, C. K., 2019, In: Construction and Building Materials. 197, p. 444-453

Research output: Contribution to journal › Article › peer-review

8 Citations (Scopus)

Influence of seasonal flooding on soil total nitrogen, organic phosphorus and microbial populations in the Okavango Delta, Botswana

Mubyana, T., Krah, M., Totolo, O. & Bonyongo, M., Jun 1 2003, In: Journal of Arid Environments. 54, 2, p. 359-369 11 p.

Research output: Contribution to journal › Article › peer-review

21 Citations (Scopus)

Influence of Shear Stress on Erosion–Corrosion of Stainless Steels in Simulated Mine Water

Moloto, A. K., Seshweni, M. H. E., Mathe, N. J., Obadele, B. A., Aribo, S., Olubambi, P. A. & Ige, O. O., Jun 1 2018, In: Journal of Bio- and Tribo-Corrosion. 4, 2, 26.

Research output: Contribution to journal › Article › peer-review

2 Citations (Scopus)

Influence of SiAlON Ceramic Reinforcement on Ti6Al4V Alloy Matrix via Spark Plasma Sintering Technique

Falodun, O. E., Oke, S. R., Obadele, B. A., Okoro, A. M. & Olubambi, P. A., Nov 28 2019, In: Metals and Materials International. 27, 6, p. 1769–1778 10 p.

Research output: Contribution to journal › Article › peer-review

2 Citations (Scopus)

Influence of sintering methods on the mechanical properties of aluminium nanocomposites reinforced with carbonaceous compounds: A review

Awotunde, M. A., Adegbenjo, A. O., Obadele, B. A., Okoro, M., Shongwe, B. M. & Olubambi, P. A., Apr 2019, In: Journal of Materials Research and Technology. 8, 2, p. 2432-2449 18 p.

Research output: Contribution to journal › Review article › peer-review

Open Access

26 Citations (Scopus)

Influence of sintering process parameters on corrosion and wear behaviour of SAF 2205 reinforced with nano-sized TiN

Oke, S. R., Ige, O. O., Falodun, O. E., Obadele, B. A., Mphahlele, M. R. & Olubambi, P. A., Feb 15 2018, In: Materials Chemistry and Physics. 206, p. 166-173 8 p.

Research output: Contribution to journal › Article › peer-review

16 Citations (Scopus)

Influence of Sintering Temperature on Hardness and Wear Properties of TiN Nano Reinforced SAF 2205

Oke, S. R., Ige, O. O., Falodun, O. E., Obadele, B. A., Mphalele, M. R. & Olubambi, P. A., Dec 21 2017, In: IOP Conference Series: Materials Science and Engineering. 272, 1, 012030.

Research output: Contribution to journal › Conference article › peer-review

Open Access

3 Citations (Scopus)

Influence of Sn substitution on amorphous to crystalline phase transformation in Ge ₂₂Sb ₂₂Te ₅₆ chalcogenide films

Kumar, J., Thangaraj, R. & Stephen Sathiaraj, T., May 1 2012, In: Journal of Optoelectronics and Advanced Materials. 14, 5-6, p. 455-459 5 p.

Research output: Contribution to journal › Article › peer-review

2 Citations (Scopus)

Influence of spark plasma sintering on microstructure and wear behaviour of Ti-6Al-4V reinforced with nanosized TiN

FALODUN, O. E., OBADELE, B. A., OKE, S. R., IGE, O. O., OLUBAMBI, P. A., LETHABANE, M. L. & BHERO, S. W., 2018, In: Transactions of Nonferrous Metals Society of China. 28, 1, p. 1-8 8 p.

Research output: Contribution to journal › Article › peer-review

Open Access

28 Citations (Scopus)

Influence of Spousal Communication about Family Planning and HIV/AIDS-related Issues on Modern Contraceptive Use in Nigeria

Fagbamigbe, A. F. & Ojebuyi, B. R., Jun 1 2017, In: Journal of Health Management. 19, 2, p. 320-333 14 p.

Research output: Contribution to journal › Article › peer-review

2 Citations (Scopus)

Influence of sputtering parameters on the structural and mechanical properties of TiC thin film coating

Abegunde, O. O., Akinlabi, E. T. & Oladijo, O. P., Aug 1 2020, In: Applied Surface Science. 520, 7 p., 146323.

Research output: Contribution to journal › Article › peer-review

3 Citations (Scopus)

Influence of surface pretreatment on the hydrophobic silane coating on AISI 304 steel

Baruwa, A. D., Oladijo, O. P., Maledi, N. & Akinlabi, E. T., 2018, Advanced Manufacturing. American Society of Mechanical Engineers(ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 2).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

2 Citations (Scopus)

Influence of Surface Treatment on Dry Sliding Wear Behavior of Hydrophobic Silane Coating on AISI 304

Baruwa, A. D., Oladijo, O. P., Maledi, N. & Akinlabi, E. T., Nov 6 2018, In: IOP Conference Series: Materials Science and Engineering. 423, 1, 012158.

Research output: Contribution to journal › Conference article › peer-review

Open Access

3 Citations (Scopus)

Influence of temperature and heating rate on biomass pyrolysis in a fixed-bed reactor

Goia, V., Cormoş, C. C. & Agachi, P. Ş., Dec 2 2011, In: Studia Universitatis Babes-Bolyai Chemia. 2, p. 49-56 8 p.

Research output: Contribution to journal › Article › peer-review

2 Citations (Scopus)

Influence of temperature and molecular structure on organics-biodiesel interactions using group contribution methods

Scheepers, J. J., Muzenda, E. & Belaid, M., 2012, Proceedings of the World Congress on Engineering 2012, WCE 2012. Korsunsky, A. M., Gelman, L., Hunter, A., Ao, S. I. & Hukins, D. WL. (eds.). Newswood Limited, p. 1411-1416 6 p. (Lecture Notes in Engineering and Computer Science; vol. 3).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

2 Citations (Scopus)

Influence of the annual flood-pulse on catch per unit effort, condition and reproduction of Clarias gariepinus from the upper Okavango Delta, Botswana

Bokhutlo, T., Weyl, O. L. F., Mosepele, K. & Wilson, G. G., May 27 2016, In: African Journal of Aquatic Science. 41, 2, p. 235-239 5 p.

Research output: Contribution to journal › Comment/debate › peer-review

2 Citations (Scopus)

Influence of the Inertia on Magnetic Drug Targeting in Microvessel-Casson Model

Sutradhar, A., Murthy, P. V. S. N. & Shaw, S., 2016, In: Journal of Nanofluids. 5, 6, p. 928-934 7 p.

Research output: Contribution to journal › Article › peer-review

Influence of the tip on electrode processes and on morphologies studied by in situ STM: Cu/Au

Andersen, J. E. T. & Møller, P., Feb 15 1997, In: Surface and Coatings Technology. 89, 1-2, p. 1-9 9 p.

Research output: Contribution to journal › Article › peer-review

2 Citations (Scopus)

Influence of thickness on optical properties of a-(Se₈₀Te ₂₀)₉₆Ag₄ thin films

Singh, D., Kumar, S., Thangaraj, R. & Sathiaraj, T. S., Jan 1 2013, In: Physica B: Condensed Matter. 408, 1, p. 119-125 7 p.

Research output: Contribution to journal › Article › peer-review

13 Citations (Scopus)

Influence of TiC thin film growth morphology deposited by RF magnetron sputtering on the mechanical and tribology properties of Ti6Al4V

Abegunde, O., Akinlabi, E. & Oladijo, P., 2020, In: Materials Today: Proceedings. 26, Part 2, p. 1469-1472 4 p.

Research output: Contribution to journal › Conference article › peer-review

1 Citation (Scopus)

Influence of urbanization-driven land use/cover change on climate: The case of Addis Ababa, Ethiopia: The 17th WaterNet/WARFSA/GWPSA Symposium: Integrated Water Resources Management: Water Security, Sustainability and Development in Eastern and Africa Southern

Arsiso, B. K., Mengistu Tsidu, G., Stoffberg, G. H. & Tadesse, T., 2018, In: Physics and Chemistry of the Earth. 105, p. 212-223 12 p.

Research output: Contribution to journal › Article › peer-review

21 Citations (Scopus)

Influence of wood fly ash reinforcement on the wear behaviour of friction stir processed aluminium-based surface matrix composite

Ikumapayi, O. M., Akinlabi, E. T., Majumdar, J. D., Oladijo, O. P. & Akinlabi, S. A., 2019, 4th North American IEOM Conference. IEOM 2019. IEOM Society, p. 966-977 12 p. (Proceedings of the International Conference on Industrial Engineering and Operations Management).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Kolawole, O. O., Afullo, T. J. O. & Mosalaosi, M., Sep 2019, IEEE AFRICON 2019: Powering Africa's Sustainable Energy for All Agenda: The Role of ICT and Engineering, AFRICON 2019. Institute of Electrical and Electronics Engineers Inc., 9134032. (IEEE AFRICON Conference; vol. 2019-September).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Initiation of atrial fibrillation by interaction of pacemakers with geometrical constraints

Lenk, C., Weber, F. M., Bauer, M., Einax, M., Maass, P. & Seeman, G., 2015, In: Journal of Theoretical Biology. 366, p. 13-23 11 p.

Research output: Contribution to journal › Article › peer-review

5 Citations (Scopus)

In Memoriam Charles Gregory Speziale 1948–1999

Dennis, S. & Thangam, S., 2006, In: Journal of Applied Mechanics, Transactions ASME. 73, 3, p. 353 1 p.

Research output: Contribution to journal › Letter › peer-review

Open Access

Inormation storage and retrieval techniques for mobile healthcare

Anderson, G., Asare, S. D., Eyitayo, A. O., Eyitayo, O. T., Mpoeleng, D., Nkgau, T. Z., Nyongesa, H. & Ogwu, F., Jul 3 2007, In: International Conference on Advanced Communication Technology, ICACT. 2, p. 1096-1100 5 p., 4195350.

Research output: Contribution to journal › Conference article › peer-review

3 Citations (Scopus)

Insights into the genesis of the epithermal Au-Ag mineralization at Rio Blanco in the Cordillera Occidental of southwestern Ecuador: Constraints from U-Pb and Ar/Ar geochronology

Bineli Betsi, T., Ponce, M., Chiaradia, M., Ulianov, A. & Camacho, A., Dec 2017, In: Journal of South American Earth Sciences. 80, p. 353-374 22 p.

Research output: Contribution to journal › Article › peer-review

4 Citations (Scopus)

In silico determination of nitrogen metabolism in microbes from extreme conditions using metagenomics

Tilahun, L., Asrat, A., Wessel, G. M. & Simachew, A., Jul 2021, In: Archives of Microbiology. 203, 5, p. 2521-2540 20 p.

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

In-situ carbon dioxide generation for oil recovery: Experimental study of pressure and temperature variations during stoichiometric reaction

Bakhtiyarov, S. I., Panakhov, G. M., Shakhverdiev, A. K., Abbasov, E. M. & Siginer, D., Jan 1 2006, Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Fluids Engineering Division. American Society of Mechanical Engineers (ASME)

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

In situ scanning probe microscopy and new perspectives in analytical chemistry

Andersen, J. E. T., Zhang, J. D., Chi, Q., Hansen, A. G., Nielsen, J. U., Friis, E. P., Ulstrup, J., Boisen, A. & Jensenius, H., Nov 1 1999, In: TrAC - Trends in Analytical Chemistry. 18, 11, p. 665-674 10 p.

Research output: Contribution to journal › Review article › peer-review

7 Citations (Scopus)

In situ STM and AFM of the copper protein Pseudomonas aeruginosa azurin

Friis, E. P., Andersen, J. E. T., Madsen, L. L., Møller, P. & Ulstrup, J., Jun 30 1997, In: Journal of Electroanalytical Chemistry. 431, 1, p. 35-38 4 p.

Research output: Contribution to journal › Article › peer-review

70 Citations (Scopus)

In support of the millennium development goals: GIS use for poverty reduction tasks

Akinyemi, F. O., 2008, In: Beijing China: IAPRSIS. 37, B7

Research output: Contribution to journal › Article › peer-review

Open Access

5 Citations (Scopus)

Filters for Research output

Search results