Find Research outputs

Search results

• 2019

  Conceptual Design Framework for Setting Up Aluminum Alloy Powder Production System for Selective Laser Melting (SLM) Process

  Matsagopane, G., Olakanmi, E. O., Botes, A. & Kutua, S., 2019, (Accepted/In press) In: JOM. 71, 5, p. 1840-1857 18 p.

  Research output: Contribution to journal › Review article › peer-review

  • Selective laser melting
  • Conceptual design
  • Powders
  • Aluminum alloys
  • Aluminum

• Convergence theorems of common solutions for fixed point, variational inequality and equilibrium problems

  Shahzad, N. & Zegeye, H., Aug 1 2019, In: Journal of Nonlinear and Variational Analysis. 3, 2, p. 189-203 15 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Pseudocontractive Mapping
  • Fixed Point Problem
  • Variational Inequality Problem
  • Iterative Process
  • Equilibrium Problem
  12 Citations (Scopus)

• Corrigendum: Atomic force microscopy analysis of surface topography of pure thin aluminum films (Materials Research Express (2018) 5 (046416) DOI: 10.1088/2053-1591/aabe1b)

  Mwema, F. M., Oladijo, O. P., Sathiaraj, T. S. & Akinlabi, E. T., Jul 12 2019, In: Materials Research Express. 6, 9, 099501.

  Research output: Contribution to journal › Comment/debate › peer-review

  Open Access

  • Atomic force microscopy
  • Surface topography
  • Aluminum

• Corrigendum to “An attainable region approach for the recovery of iron and zinc from electric arc furnace dust [South Afr. J. Chem. Eng.](S1026918518300830)(10.1016/j.sajce.2018.12.002)

  Siame, M. C., Kaoma, J., Hlabangana, N., Danha, G., Afolabi, A. S. & Muvhiiwa, R. F., Jul 2019, In: South African Journal of Chemical Engineering. 29, p. 52 1 p.

  Research output: Contribution to journal › Comment/debate › peer-review

  Open Access

  • Electric arcs
  • Dust
  • Zinc
  • Iron
  • Furnaces

• Corrosion behavior of ductile and austempered ductile cast iron in 0.01M and 0.05M NaCl Environments.

  Akinribide, O. J., Akinwamide, S. O., Ajibola, O. O., Obadele, B. A., Olusunle, S. O. O. & Olubambi, P. A., Jan 1 2019, In: Procedia Manufacturing. 30, p. 167-172 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Nodular iron
  • Cast iron
  • Sodium chloride
  • Corrosion
  • Oxidation
  2 Citations (Scopus)

• Cost optimization and development of hybrid energy systems for rural areas in Ethiopia with a balance of their energy need and resources availability (a case study-on TulUDIMTU)

  Samikannu, R., Sampath Kumar, V., Diarra, B. & Ravi, R., Nov 1 2019, In: Journal of Testing and Evaluation. 47, 6, 20 p., JTE20180462.

  Research output: Contribution to journal › Article › peer-review

  • Solar energy
  • Wind power
  • Availability
  • Solar radiation
  • Irradiation
  7 Citations (Scopus)

• Crashworthiness response of natural silk-fibre glass hybrid reinforced epoxy cylindrical composite tubes under quasi-static load

  Ude, A. U. & Azhari, C. H., 2019, In: AIMS Materials Science. 6, 5, p. 852-863 12 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • fiberglass
  • Silk
  • Crashworthiness
  • Glass fibers
  • Fibers
  1 Citation (Scopus)

• Critical assessment of mechanistic pathways for chemical remediation techniques applied to Pb impacted soils at shooting ranges – A review

  Dinake, P. & Kelebemang, R., Oct 21 2019, In: Environmental Pollutants and Bioavailability. 31, 1, p. 282-305 24 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • shooting range
  • remediation
  • stabilization
  • soil
  • physicochemical property
  1 Citation (Scopus)

• Dataset of spark plasma sintering of Al[sbnd]Zn[sbnd]Sn alloy for soft solder application

  Oladijo, O. P., Popoola, A. P. I., Ujah, C. O. & Namoshe, M., Jun 2019, In: Data in Brief. 24, 12 p., 103948.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • solders
  • sparks
  • sintering
  • hardness
  • porosity
  2 Citations (Scopus)

• Deformation Monitoring of Lotsane Bridge Using Geodetic Method

  Mayunga, S. D. & Rabamasoka, T., Aug 2019, In: International Journal of Scientific Engineering and Research (IJSER). 7, 8, p. 21-27 7 p., 13081901.

  Research output: Contribution to journal › Article › peer-review

  • monitoring
  • method
  • road
  • safety measure
  • high-rise building

• Degradation of water hyacinth (Eichhornia crassipes) to vermicompost through application of the vermicomposting technology

  Manyuchi, M. M., Mbohwa, C., Muzenda, E., Mutusva, T. N. & Mpeta, M., 2019, Proceedings of the International Conference on Industrial Engineering and Operations Management. MAR ed. IEOM Society, p. 79-85 7 p. (Proceedings of the International Conference on Industrial Engineering and Operations Management; vol. 2019, no. MAR).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

  • Degradation
  • Organic carbon
  • Water
  • Chemical oxygen demand
  • Carbon

• Densification, microstructure and mechanical properties of spark plasma sintered Ni-17%Cr binary alloys

  Babalola, B. J., Shongwe, M. B., Obadele, B. A. & Olubambi, P. A., Apr 6 2019, In: International Journal of Advanced Manufacturing Technology. 101, 5-8, p. 1573-1581 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Binary alloys
  • Densification
  • Electric sparks
  • Sintering
  • Plasmas
  7 Citations (Scopus)

• Densification and tensile properties of titanium grade 4 produced using different routes

  Masikane, M. A., Johnson, O. T., Ogunmuyiwa, E. N. & Sigalas, I., 2019, In: Procedia Manufacturing. 35, p. 826-832 7 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Spark plasma sintering
  • Densification
  • Tensile properties
  • Titanium
  • Casting
  1 Citation (Scopus)

• Design and Analysis of Hip Joint DOFs for Lower Limb Robotic Exoskeleton

  Gwebu, Z., Moruti, K. & Jamisola, R. S., Nov 2019, 2019 IEEE 11th International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment, and Management, HNICEM 2019. Institute of Electrical and Electronics Engineers Inc., 6 p. 9073479. (2019 IEEE 11th International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment, and Management, HNICEM 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Exoskeleton (Robotics)
  • exoskeleton
  • Robotics
  • robotics
  • freedom

• Design of a Biodigester to Treat Cow Dung in Botswana

  Valela, I. & Muzenda, E., Nov 2019, Proceedings of 2019 7th International Renewable and Sustainable Energy Conference, IRSEC 2019. El Hibaoui, A., Essaaidi, M. & Zaz, Y. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 1-5 5 p. 9078244. (Proceedings of 2019 7th International Renewable and Sustainable Energy Conference, IRSEC 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Biogas
  • Decision theory
  • Feedstocks
  • Farms
  • Data structures

• Design of an educational electronic game system

  Mtengi, B., Zungeru, A. M., Maphane, P. & Chuma, J., Sep 25 2019, Proceedings of 2019 2nd International Conference on Electronics and Electrical Engineering Technology, EEET 2019 - Workshop 2019 3rd International Conference on Biomedical Engineering and Bioinformatics, ICBEB 2019. Association for Computing Machinery, p. 1-6 6 p. (ACM International Conference Proceeding Series).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Networks (circuits)
  • Timing circuits
  • Students
  • Television
  • Curricula

• Design of an enhanced hit the target game

  Mtengi, B., Zungeru, A. M., Bakary, D. & Chuma, J., Sep 25 2019, Proceedings of 2019 2nd International Conference on Electronics and Electrical Engineering Technology, EEET 2019 - Workshop 2019 3rd International Conference on Biomedical Engineering and Bioinformatics, ICBEB 2019. Association for Computing Machinery, p. 37-41 5 p. (ACM International Conference Proceeding Series).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Light emitting diodes
  • Integrated circuits
  • Accidents
  • Networks (circuits)
  • Costs

• Design of a photovoltaic system with ultracapacitor energy buffer

  Diarra, B., Zungeru, A. M., Ravi, S., Chuma, J., Basutli, B. & Zibani, I., Jan 1 2019, In: Procedia Manufacturing. 33, p. 216-223 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Maximum power point trackers
  • Supercapacitor
  • Sun
  • Geothermal energy
  • Electric power generation
  3 Citations (Scopus)

• Design of a short range optical pulse transceiver system for intruder detection

  Basutli, B., Zungeru, A. M., Mtengi, B. & Diarra, B., Sep 25 2019, Proceedings of 2019 2nd International Conference on Electronics and Electrical Engineering Technology, EEET 2019 - Workshop 2019 3rd International Conference on Biomedical Engineering and Bioinformatics, ICBEB 2019. Association for Computing Machinery, p. 68-73 6 p. (ACM International Conference Proceeding Series).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Laser pulses
  • Transceivers
  • Networks (circuits)
  • Telecommunication links
  • Transmitters

• Desilication of calcined pulverised fly ash and use of silicate solution to prepare a mesoporous silica adsorbent for heavy metals in acid mine drainage

  Falayi, T., Ntuli, F. & Okonta, F. N., 2019, In: International Journal of Environmental Technology and Management. 22, 2-3, p. 155-176 22 p.

  Research output: Contribution to journal › Article › peer-review

  • Heavy metals
  • Adsorbents
  • acid mine drainage
  • Silicates
  • Drainage
  1 Citation (Scopus)

• Determination of the least impactful municipal solid waste management option in Harare, Zimbabwe

  Nhubu, T. & Muzenda, E., Nov 1 2019, In: Processes. 7, 11, 22 p., 785.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Municipal solid waste
  • Waste management
  • Eutrophication
  • Recovery
  • Acidification
  3 Citations (Scopus)

• Determining real permittivity from fresnel coefficients in GNSS-R

  Savi, P., Bertoldo, S. & Milani, A., 2019, In: Progress In Electromagnetics Research M. 79, p. 159-166 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • satellite navigation systems
  • soils
  • Permittivity
  • Soils
  • Satellites
  1 Citation (Scopus)

• Development and size distribution of polystyrene/ZnO nanofillers

  Ayeleru, O. O., Dlova, S., Ntuli, F., Kupolati, W. K. & Olubambi, P. A., 2019, In: Procedia Manufacturing. 30, p. 194-199 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Polystyrenes
  • Fourier transforms
  • Particle size
  • Infrared radiation
  • Hydrothermal synthesis
  2 Citations (Scopus)

• Development of available transfer capability enhancement using intelligent genetic algorithm for IEEE bus system

  Rohini, R., Rao, D. N., Ravi, S. & Sampath Kumar, V., Sep 2019, In: Intelligent Automation and Soft Computing. 25, 3, p. 433-440 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Enhancement
  • Electric power transmission networks
  • Genetic Algorithm
  • Genetic algorithms
  • Outages
  1 Citation (Scopus)

• Development of lightweight construction blocks by alkaline activation of bof slag

  Sithole, N. T., Okonta, F. & Ntuli, F., 2019, In: Journal of Solid Waste Technology and Management. 45, 2, p. 175-185 11 p.

  Research output: Contribution to journal › Article › peer-review

  • slag
  • sodium
  • silicate
  • land
  • solid waste
  1 Citation (Scopus)

• Development of low content phosphogypsum waste composites modified by lime-fly ash-basic oxygen furnace slag

  Mashifana, T. P., Okonta, F. N. & Ntuli, F., 2019, In: Revista Romana de Materiale/ Romanian Journal of Materials. 49, 2, p. 294-302 9 p.

  Research output: Contribution to journal › Article › peer-review

  • phosphogypsum
  • Coal Ash
  • lime
  • Basic oxygen converters
  • Lime

• Development of Methods Acquiring Real Time Very High Resolution Agricultural Spatial Information Using Unmanned Aerial Vehicle

  Bolo, B., Mpoeleng, D. & Zlotnikova, I., 2019, In: Agris On-line Papers in Economics and Informatics. 11, 2, p. 21-29 9 p.

  Research output: Contribution to journal › Article › peer-review

  • unmanned aerial vehicles
  • development of methods
  • spatial data
  • vehicle
  • farm management
  1 Citation (Scopus)

• Development of MgAl₂O₄ grain refiner in Al in-situ composite through H₃BO₃ addition

  Chandramohan, P., Olubambi, P. A., Raghu, R. & Obadele, B. A., Nov 8 2019, In: IOP Conference Series: Materials Science and Engineering. 655, 1, 012039.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • spinell
  • Sodium chloride
  • Corrosion
  • Composite materials
  • aluminum magnesium oxide

• Disentangling factors limiting diamondback moth, Plutella xylostella (L.), spatio-temporal population abundance: A tool for pest forecasting

  Machekano, H., Mutamiswa, R., Mvumi, B. M., Nyabako, T., Shaw, S. & Nyamukondiwa, C., May 2019, In: Journal of Applied Entomology. 143, 6, p. 670-682 13 p.

  Research output: Contribution to journal › Article › peer-review

  • Plutella xylostella
  • species abundance
  • pests
  • moths
  • relative humidity
  1 Citation (Scopus)

• Ecology and epidemiology of rabies in humans, domestic animals and wildlife in Namibia, 2011-2017

  Hikufe, E. H., Freuling, C. M., Athingo, R., Shilongo, A., Ndevaetela, E. E., Helao, M., Shiindi, M., Hassel, R., Bishi, A., Khaiseb, S., Kabajani, J., van der Westhuizen, J., Torres, G., Britton, A., Letshwenyo, M., Schwabenbauer, K., Mettenleiter, T. C., Denzin, N., Amler, S., Conraths, F. J. & 2 others, Müller, T. & Maseke, A., Apr 2019, In: PLoS Neglected Tropical Diseases. 13, 4, 19 p., e0007355.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Namibia
  • Rabies
  • Domestic Animals
  • Ecology
  • Epidemiology
  6 Citations (Scopus)

• EEG-based Control of a 3D Game Using 14-channel Emotiv Epoc+

  Malete, T. N., Moruti, K., Thapelo, T. S. & Jamisola, R. S., Nov 2019, Proceedings of the IEEE 2019 9th International Conference on Cybernetics and Intelligent Systems and Robotics, Automation and Mechatronics, CIS and RAM 2019. Institute of Electrical and Electronics Engineers Inc., p. 463-468 6 p. 9095807. (Proceedings of the IEEE 2019 9th International Conference on Cybernetics and Intelligent Systems and Robotics, Automation and Mechatronics, CIS and RAM 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Electroencephalography
  • Game
  • Brain
  • Machine Learning
  • Training

• Effect of [Tris(trimethylsiloxy)silyethyl]dimethylchlorosilane on the corrosion protection enhancement of hydrophobic film coated on AISI 304

  Baruwa, A. D., Akinlabi, E. T., Oladijo, O. P., Maledi, N. & Chinn, J., Jan 2019, In: Materials Research Express. 6, 1, 016427.

  Research output: Contribution to journal › Article › peer-review

  • Silicon oxides
  • Corrosion protection
  • Silanes
  • Adhesion
  • Plasmas
  2 Citations (Scopus)

• Effect of CrC-Ni on the tribological behaviour of WC cemented carbide.

  Mekgwe, G. N., Tuckart, W. R., Akinribide, O. J., Langa, T., Obadele, B. A. & Olubambi, P. A., Apr 3 2019, In: IOP Conference Series: Materials Science and Engineering. 499, 1, 012012.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Carbides
  • Cobalt
  • Wear of materials
  • cobalt carbide
  • Cermet Cements
  2 Citations (Scopus)

• Effect of curing temperature and particle size distribution on unconfined compressive strength of raw and treated fly ash-lime modified phosphogypsum waste

  Mashifana, T., Okonta, F. & Ntuli, F., Oct 29 2019, In: IOP Conference Series: Materials Science and Engineering. 652, 1, 8 p., 12044.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • phosphogypsum
  • Coal Ash
  • lime
  • Particle size analysis
  • Lime

• Effect of graphite addition on the tribological properties of pure titanium carbonitride prepared by spark plasma sintering

  Mekgwe, G. N., Akinribide, O. J., Langa, T., Obadele, B. A., Olubambi, P. A. & Lethabane, L. M., Apr 3 2019, In: IOP Conference Series: Materials Science and Engineering. 499, 1, 012011.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • titanium carbonitride
  • Cermet Cements
  • Carbon nitride
  • Graphite
  • Spark plasma sintering

• Effect of heating rate on the microstructure and mechanical properties of spark plasma sintered cnts reinforced nickel aluminide

  Ayodele, O. O., Awotunde, M. A., Shongwe, M. B., Adegbenjo, A. O., Babalola, B. J., Obadele, B. A. & Olubambi, P. A., Jan 1 2019, Key Engineering Materials IX. Korsunsky, A. M. (ed.). Trans Tech Publications Ltd, p. 440-444 5 p. (Key Engineering Materials; vol. 821 KEM).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Nickel
  • Heating rate
  • Carbon Nanotubes
  • Electric sparks
  • Ball mills

• Effect of interstitial filling, ball and feed size on particle breakage in a laboratory ball mill: An attainable region technique

  Tembo, P. M., Khumalo, S., Chakawa, D. P., Danha, G., Hlabangana, N. & Muzenda, E., 2019, In: Procedia Manufacturing. 35, p. 80-84 5 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Ball mills
  • Particle size
  • Powders
  • Engineers
  • Costs

• Effect of media shape on particle breakage in a batch ball mill: Lessons learnt from population balance model and attainable region technique

  Khumalo, S., Hlabangana, N., Danha, G. & Muzenda, E., 2019, In: Procedia Manufacturing. 35, p. 75-79 5 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Ball mills
  • Ball milling
  • Ores
  • Quartz

• Effect of particle size and alkali-laccase on the properties of pterocarpus angolensis (Mukwa) wood flour

  Setswalo, K., Oladijo, O. P., Namoshe, M., Akinlabi, E. T. & Mokoba, M., 2019, In: Procedia Manufacturing. 35, p. 465-470 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Particle size
  • Wood
  • Fibers
  • Lignin
  • Sodium hydroxide

• Effect of processing technique on the mechanical properties of a functionalized superhydrophobic silane

  Baruwa, A. D., Akinlabi, E. T., Oladijo, O. P., Dutta-Majumdar, J. & Krishna, S., 2019, Advanced Manufacturing. American Society of Mechanical Engineers(ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 2A-2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Atomic layer deposition
  • Silanes
  • Chemical vapor deposition
  • Mechanical properties
  • Coatings

• Effect of scan rate on AFM imaging on 3D surface stereometrics of aluminum films

  Mwema, F. M., Akinlabi, E. T. & Oladijo, O. P., 2019, In: Materials Today: Proceedings. 18, Part 7, p. 2315-2321 7 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Aluminum
  • Topography
  • Microscopes
  • Imaging techniques
  • Fractal dimension
  1 Citation (Scopus)

• Effect of Solids Concentration in Cow Dung on Biogas Yield

  Makhura, E. P., Muzenda, E. & Lekgoba, T., Nov 2019, Proceedings of 2019 7th International Renewable and Sustainable Energy Conference, IRSEC 2019. El Hibaoui, A., Essaaidi, M. & Zaz, Y. (eds.). Institute of Electrical and Electronics Engineers Inc., 9078218. (Proceedings of 2019 7th International Renewable and Sustainable Energy Conference, IRSEC 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Biogas
  • Anaerobic digestion
  • Methane
  • Gases
  • Animals

• Effect of Supertargeting and Non Isothermal Stream Mixing in Heat Exchanger Network Design Using Modified Pinch Analysis

  Azeez, O., Blessing, O., Onyinye, E. & Hassan, A., May 2019, In: International Journal of Energy and Environmental Science. 4, 1, p. 18-26 9 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Heat exchangers
  • Costs
  • Temperature

• Effect of the operation parameters on the Fischer Tropsch synthesis process using different reactors

  Makhura, E., Rakereng, J., Rapoo, O. & Danha, G., 2019, In: Procedia Manufacturing. 35, p. 349-355 7 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Fischer-Tropsch synthesis
  • Catalysts
  • Iron
  • Hydrocarbons
  • Chain length

• Effect of TiN addition on corrosion behavior of spark plasma sintered 304L austenitic stainless steel in chloride media

  Olukayode Akinwamide, S., Jeremiah Akinribide, O., Mafafo, M., Phumlani, M., Abiodun Obadele, B., Tolulope Abe, B. & Apata Olubambi, P., Nov 2019, In: Materials Today: Proceedings.

  Research output: Contribution to journal › Article › peer-review

• Effect of varying low substrate temperature on sputtered aluminium films

  Mwema, F. M., Akinlabi, E. T., Oladijo, O. P. & Majumdar, J. D., 2019, In: Materials Research Express. 6, 5, 056404.

  Research output: Contribution to journal › Article › peer-review

  • Aluminum
  • Substrates
  • Thin films
  • Elastic moduli
  • Amorphous films
  12 Citations (Scopus)

• Effects of biomass/coal copyrolysis parameters on the product yield: A review

  Thibanyane, N., Agachi, P. & Danha, G., 2019, In: Procedia Manufacturing. 35, p. 477-487 11 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Biomass
  • Coal
  • Pyrolysis
  • Feedstocks
  • Catalysis

• Effects of Hydrology on Fish Diversity and Assemblage Structure in a Texan Coastal Plains River

  Bower, L. M., Keppeler, F. W., Cunha, E. R., Quintana, Y., Saenz, D. E., Lopez-Delgado, E. O., Bokhutlo, T., Arantes, C. C., Andrade, M. C., Robertson, C. R., Mayes, K. B. & Winemiller, K. O., Jan 2019, In: Transactions of the American Fisheries Society. 148, 1, p. 207-218 12 p.

  Research output: Contribution to journal › Article › peer-review

  • hydrology
  • coastal plains
  • coastal plain
  • oxbow lakes
  • rivers
  4 Citations (Scopus)

• Effects of Mo content on the microstructural and mechanical properties of as-cast Ti-Mo alloys

  Moshokoa, N., Raganya, L., Obadele, B., Olubambi, P. & Machaka, R., Nov 8 2019, In: IOP Conference Series: Materials Science and Engineering. 655, 1, 012015.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Vickers hardness
  • Optical microscopy
  • X ray diffraction
  • Mechanical properties
  • Elastic moduli
  1 Citation (Scopus)

• Effects of temperature and rainfall in plant–herbivore interactions at different altitude

  Asfaw, M. D., Kassa, S. M., Lungu, E. & Bewket, W., Aug 2019, In: Ecological Modelling. 406, p. 50 - 59

  Research output: Contribution to journal › Article › peer-review

  • coexistence
  • rainfall
  • environmental factor
  • river basin
  • ecology
  2 Citations (Scopus)