Find Research outputs

Search results

• Conference contribution

  Evaluation of wear and corrosion behaviour of hybrid sintered ti6al4v alloy

  Ayodele, O. O., Awotunde, M. A., Shongwe, M. B., Adegbenjo, A. O., Babalola, B. J., Obadele, B. A. & Olubambi, P. A., Jan 1 2019, Key Engineering Materials IX. Korsunsky, A. M. (ed.). Trans Tech Publications Ltd, p. 321-326 6 p. (Key Engineering Materials; vol. 821 KEM).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Evolution of microstructure and wear properties of aluminum thin films with sputtering substrate temperature

  Mwema, F. M., Akinlabi, E. T., Oladijo, O. P. & Dutta Majumdar, J., May 13 2019, 2019 IEEE 10th International Conference on Mechanical and Intelligent Manufacturing Technologies, ICMIMT 2019. Institute of Electrical and Electronics Engineers Inc., p. 31-36 6 p. 8712046. (2019 IEEE 10th International Conference on Mechanical and Intelligent Manufacturing Technologies, ICMIMT 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Exergy and economic analyses of a hybrid solid oxide fuel cell by computer simulation

  Bilyaminu, S., Yenkwo, K. C., Saka, A. A. & Afolabi, A. S., Jan 1 2015, WCE 2015 - World Congress on Engineering 2015. Ao, S. I., Gelman, L., Gelman, L., Hukins, D. W. L., Hunter, A., Korsunsky, A. M., Ao, S. I. & Ao, S. I. (eds.). Newswood Limited, Vol. 2218. p. 785-790 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Experimental and calculated THz spectra of analgesics

  Lepodise, L. M., Lewis, R. A. & Horvat, J., Oct 12 2017, 2017 42nd International Conference on Infrared, Millimeter, and Terahertz Waves, IRMMW-THz 2017. IEEE Computer Society, 8067049. (International Conference on Infrared, Millimeter, and Terahertz Waves, IRMMW-THz).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Experimental view of the sub-tropical clayey soils-acid mine drainage interactions

  Agbenyeku, E. E. O., Muzenda, E. & Msibi, I. M., Jan 1 2016, WCECS 2016 - World Congress on Engineering and Computer Science 2016. Grundfest, W. S., Douglas, C. & Ao, S. I. (eds.). Newswood Limited, Vol. 2226. p. 612-616 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Exploring the effect of rf power in sputtering of aluminum thin films-a microstructure analysis

  Mwema, F. M., Akinlabi, E. T. & Oladijo, O. P., 2019, 4th North American IEOM Conference. IEOM 2019. IEOM Society, p. 745-750 6 p. (Proceedings of the International Conference on Industrial Engineering and Operations Management).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Extending the bargain region using beamforming design under mixed QoS constraints

  Basutli, B. & Lambotharan, S., Sep 9 2015, 2015 IEEE International Conference on Digital Signal Processing, DSP 2015. Institute of Electrical and Electronics Engineers Inc., Vol. 2015-September. p. 511-515 5 p. 7251925

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Extraction of buildings in informal settlement areas from high-resolution data

  Mayunga, S. D., Zhang, Y. & Coleman, D. J., 2005, American Society for Photogrammetry and Remote Sensing - Annual Conference 2005 - Geospatial Goes Global: From Your Neighborhood to the Whole Planet. Vol. 2. p. 691-702 12 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Fabrication and characterization of spray pyrolysed inxsy thin films for cuins2 solar cells

  Maabong, K. & Muiva, C., 2010, Proceedings of the 3rd IASTED African Conference on Power and Energy Systems, AfricaPES 2010. p. 22-28 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Fabrication of AISI 304 Austenitic Stainless Steels with TiN Addition Using Spark Plasma Sintering Method

  Obadele, B. A., Mafafo, R. M., Tuckart, W. R. & Olubambi, P. A., 2021, Trends in Manufacturing and Engineering Management - Select Proceedings of ICMechD 2019. Vijayan, S., Subramanian, N. & Sankaranarayanasamy, K. (eds.). Springer Nature, Singapore, p. 681-689 9 p. (Lecture Notes in Mechanical Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Fabrication of paper based microfluidic devices

  Govindasamy, K., Potgieter, S., Land, K. & Muzenda, E., 2012, Proceedings of the World Congress on Engineering 2012, WCE 2012. Korsunsky, A. M., Gelman, L., Hunter, A., Ao, S. I. & Hukins, D. WL. (eds.). Newswood Limited, p. 1427-1432 6 p. (Lecture Notes in Engineering and Computer Science; vol. 3).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Factorial design optimization of monometallic (cobalt) catalyst on calcium carbonate support for carbon nanotubes synthesis

  Abdulkareem, A. S., Suleiman, B., Ajamah, S. O. E., Mohammed, I. A., Bankole, M. T. & Afolabi, A. S., Jan 1 2016, WCECS 2016 - World Congress on Engineering and Computer Science 2016. Grundfest, W. S., Douglas, C. & Ao, S. I. (eds.). Newswood Limited, Vol. 2226. p. 570-575 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Factors influencing chemical absorption of C0₂ and H₂S in biogas purification: A review

  Maile, O. I., Tesfagiorgis, H. B. & Muzenda, E., Jan 1 2015, WCECS 2015 - World Congress on Engineering and Computer Science 2015. Douglas, C., Burgstone, J., Grundfest, W. S., Burgstone, J., Douglas, C. & Ao, S. I. (eds.). Newswood Limited, Vol. 2220. p. 619-622 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Fading channel characterization over frequency hopping spread spectrum

  Yahya, A., Sidek, O. & Fadzli, M., Dec 1 2008, WMSCI 2008 - The 12th World Multi-Conference on Systemics, Cybernetics and Informatics, Jointly with the 14th International Conference on Information Systems Analysis and Synthesis, ISAS 2008 - Proc.. Vol. 3. p. 299-302 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Feasibility of Genetic Algorithms in 2D Ultrasound Array Optimization

  Diarra, B., Samikannu, R., Vray, D., Cachard, C., Chuma, J., Yahya, A. & Liebgott, H., Dec 17 2018, 2018 IEEE International Ultrasonics Symposium, IUS 2018. IEEE Computer Society, 8579952. (IEEE International Ultrasonics Symposium, IUS; vol. 2018-October).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Feature weighting for Case-based reasoning software project effort estimation

  Sigweni, B., 2014, 18th International Conference on Evaluation and Assessment in Software Engineering, EASE 2014. Association for Computing Machinery, a54

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  5 Citations (Scopus)

• Feature weighting techniques for CBR in software effort estimation studies: A review and empirical evaluation

  Sigweni, B. & Shepperd, M., Jan 1 2014, 10th International Conference on Predictive Models in Software Engineering, PROMISE 2014. Association for Computing Machinery, p. 32-41 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  18 Citations (Scopus)

• Feedback State Estimation for Multi-rotor Drones Stabilisation Using Low-Pass Filter and a Complementary Kalman Filter

  Kangunde, V., Mohutsiwa, L. O. & Jamisola, R. S., Jun 15 2021, 2021 International Conference on Unmanned Aircraft Systems, ICUAS 2021. Institute of Electrical and Electronics Engineers Inc., p. 188-194 7 p. 9476809. (2021 International Conference on Unmanned Aircraft Systems, ICUAS 2021).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Flame -flexible and accurate motif detector for continuous pattern discovery in sequence data sets

  Selvaraj, R., Kuthadi, V. M. & Ranjan, A., Jan 1 2012, Proceedings of the IADIS International Conference Information Systems 2012, IS 2012. Isaias, P., Rodrigues, L., Nunes, M. B. & Powell, P. (eds.). IADIS, p. 362-367 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Flow instabilities and heat transfer in buoyancy driven flows of inelastic non-Newtonian fluids in inclined rectangular cavities

  Siginer, D. & Khezzar, L., Dec 1 2010, ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting Collocated with 8th International Conference on Nanochannels, Microchannels, and Minichannels, FEDSM2010. PARTS A, B AND C ed. Vol. 1. p. 1411-1420 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Flows in Manufacturing Processes: Introduction

  Siginer, D. A., Watanabe, K., Bourgin, P., Iwamoto, J. & Bakhtiyarov, S. I., Dec 1 2003, Proceedings of the 4th ASME/JSME Joint Fluids Engineering Conference: Volume 2, Part C, Symposia. Ogut, A., Tsuji, Y., Kawahashi, M., Ogut, A., Tsuji, Y. & Kawahashi, M. (eds.). Vol. 2 C. 1 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Fractal Analysis of Thin Films Surfaces: A Brief Overview

  Mwema, F. M., Akinlabi, E. T. & Oladijo, O. P., 2020, Advances in Material Sciences and Engineering, ICMMPE 2018. Awang, M., Emamian, S. S. & Yusof, F. (eds.). Springer India, p. 251-263 13 p. (Lecture Notes in Mechanical Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  4 Citations (Scopus)

• From Crash Tolerance to Authenticated Byzantine Tolerance: A Structured Approach, the Cost and Benefits

  Mpoeleng, D., Ezhilchelvan, P. & Speirs, N., 2003, Proceedings of the International Conference on Dependable Systems and Networks. p. 227-236 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  13 Citations (Scopus)

• Function driven object-oriented (FUDOO) methodology for design and reconfiguration of reconfigurable bending press tools (RBPTs)

  Gwangwava, N., Mpofu, K., Tlale, N. & Yu, Y., Dec 1 2012, Proceedings of the IASTED International Conference on Engineering and Applied Science, EAS 2012. p. 327-334 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Geophysical investigation of the groundwater regimes in the lower Okavango Delta, Northwestern Botswana

  Shemang, E. M., Molwalefhe, L. N., Kumar, H., Bakaya, T. & Ntsatsi, J., 2005, 18th Symposium on the Application of Geophysics to Engineering and Environmental Problems, SAGEEP 2005: Geophysical Solutions for Today's Challenges. Vol. 1. p. 476-487 12 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• GIS data modeling in water management decision support systems

  Rata, M., Blidaru, T. V. & Agachi, P. S., Jan 1 2014, Proceedings of 2014 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2014. IEEE Computer Society, 6857918

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access
  2 Citations (Scopus)

• Global Plastic Waste Pollution Challenges and Management

  Mazhandu, Z. S. & Muzenda, E., Nov 2019, Proceedings of 2019 7th International Renewable and Sustainable Energy Conference, IRSEC 2019. El Hibaoui, A., Essaaidi, M. & Zaz, Y. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 1-8 8 p. 9078268. (Proceedings of 2019 7th International Renewable and Sustainable Energy Conference, IRSEC 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• GMM Estimation and BER of Bursty Impulsive Noise in Low-voltage PLC Networks

  Awino, S. O., Afullo, T. J. O., Mosalaosi, M. & Akuon, P. O., Jun 2019, 2019 PhotonIcs and Electromagnetics Research Symposium - Spring, PIERS-Spring 2019 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 1828-1834 7 p. 9017860. (Progress in Electromagnetics Research Symposium; vol. 2019-June).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• GNP-based fuzzy class-association-rule mining with sub-attribute utilization

  Ranjan, A., Selvaraj, R. & Kuthadi, V. M., Jan 1 2012, Proceedings of the IADIS International Conference Information Systems 2012, IS 2012. Isaias, P., Rodrigues, L., Nunes, M. B. & Powell, P. (eds.). IADIS, p. 11-17 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• GNSS Reflectometry Systems for soil permittivity determination

  Savi, P., Bertoldo, S. & Milani, A., Mar 2019, 13th European Conference on Antennas and Propagation, EuCAP 2019. Institute of Electrical and Electronics Engineers Inc., 4 p. 8739789. (13th European Conference on Antennas and Propagation, EuCAP 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Graetz problem in ducts of circular and some non-circular cross-sections with viscoelastic fluids

  Abdelkader, F., Khezzar, L., Siginer, D. A. & Nemouchi, Z., Dec 1 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011. PARTS A AND B ed. Vol. 6. p. 149-154 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Graetz problem using fene-P fluids without viscous dissipation

  Abdelkader, F., Khezzar, L., Siginer, D. A. & Nemouchi, Z., Dec 1 2012, ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012. PARTS A, B, C, D ed. Vol. 7. p. 1141-1148 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Ground-based FTIR spectrometer observation of nitrous oxide and its validation over addis ababa, Ethiopia

  Takele, S., Mengistu, G., Blumenstock, T. & Hase, F., 2011, Fourier Transform Spectroscopy, FTS 2011. Optical Society of America (OSA), (Optics InfoBase Conference Papers).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Groupwise pairwise scheme for wireless sensor networks

  Anokye, S., Semong, T., Li, Q. & Hu, Q., Nov 20 2009, Proceedings - 2009 International Conference on New Trends in Information and Service Science, NISS 2009. p. 695-699 5 p. 5260950

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Guaranteeing task prioritization for redundant robots given maximum number of tasks and singularities

  Jamisola, R. S., Chang, P. H. & Lee, J., Dec 1 2012, IEEE TENCON 2012: Sustainable Development Through Humanitarian Technology. 6412276

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  5 Citations (Scopus)

• Haptic exploration of unknown surfaces with discontinuities

  Jamisola, R. S., Kormushev, P., Bicchi, A. & Caldwell, D. G., Oct 31 2014, IROS 2014 Conference Digest - IEEE/RSJ International Conference on Intelligent Robots and Systems. Institute of Electrical and Electronics Engineers Inc., p. 1255-1260 6 p. 6942718

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  8 Citations (Scopus)

• Heat transfer asymptote in laminar tube flows of non-linear viscoelastic fluids

  Siginer, D. A., Dec 1 2010, 2010 14th International Heat Transfer Conference, IHTC 14. Vol. 2. p. 839-852 14 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Heat transfer enhancement in corrugated pipes

  Siginer, D. A. & Akyildiz, F. T., Dec 1 2010, 2010 14th International Heat Transfer Conference, IHTC 14. Vol. 2. p. 853-860 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Heat transfer in internal flows of non-linear fluids: A review

  Siginer, D. A. & Letelier, M. F., 2006, Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Fluids Engineering Division. American Society of Mechanical Engineers (ASME)

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Heat transfer in laminar tube flow of a class of non-affine viscoelastic fluids

  Siginer, D. A. & Letelier, M. F., 2006, Proceedings of ASME Fluids Engineering Division Summer Meeting 2006, FEDSM2006. Vol. 1 SYPMOSIA. p. 1459-1466 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Heat transfer in steady viscoelastic flow in pipes of complex shapes

  Letelier, M. F., Mardoñez, A. & Siginer, D. A., 2002, Fluids Engineering. American Society of Mechanical Engineers (ASME), p. 283-289 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• High performance tiny capacitor development using MATLAB for harmonic elimination in symmetrical full bridge circuit

  Nithya, C., Kumarakrishnan, V., Ravi, S. & Rasool Mohideen, S., Oct 5 2015, Proceedings of the IEEE International Conference on Soft-Computing and Network Security, ICSNS 2015. Institute of Electrical and Electronics Engineers Inc., 7292402

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• High speed approach for detecting QRS complex characteristics in single lead electrocardiogram signal

  Salih, S. K., Aljunid, S. A., Aljunid, S. M., Maskon, O. & Yahya, A., Dec 1 2013, Proceedings - 2013 IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2013. p. 391-396 6 p. 6719996

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Honey pot: A major technique for intrusion detection

  Selvaraj, R., Kuthadi, V. M. & Marwala, T., Jan 1 2016, Proceedings of the 2nd International Conference on Computer and Communication Technologies, IC3T 2015. Mandal, J. K., Bhateja, V., Satapathy, S. C. & Raju, K. S. (eds.). Springer Verlag, p. 73-82 10 p. (Advances in Intelligent Systems and Computing; vol. 380).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Hybrid technique for frequent pattern extraction from Sequential Database

  Selvaraj, R., Kuthadi, V. M. & Marwala, T., Jan 1 2014, Proceedings of the 3rd International Conference on Frontiers of Intelligent Computing: Theory and Applications, FICTA 2014. Udgata, S. K., Biswal, B. N., Mandal, J. K. & Satapathy, S. C. (eds.). Springer Verlag, p. 265-275 11 p. (Advances in Intelligent Systems and Computing; vol. 327).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Hydrodynamic Conditions and Photodegradation of Methyl Orange in a Fluidized Bed Photoreactor

  Mhlanga, R. J., Nyembe, N., Chiririwa, H. & Ochieng, A., 2016, Proceedings of 2016 5th International Conference on Advances in Engineering and Technology . p. 23-29 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

• Hydrogen-based power generation from bioethanol steam reforming

  Tasnadi-Asztalos, Z., Cormos, C. C. & Agachi, P. S., Dec 23 2015, 10th International Conference Processes in Isotopes and Molecules, PIM 2015. Falamas, A. & Turcu, I. (eds.). American Institute of Physics Inc., Vol. 1700. 050001

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Identifying the failure-tolerant workspace boundaries of a kinematically redundant manipulator

  Roberts, R. G., Jamisola, R. S. & Maciejewski, A. A., Nov 27 2007, 2007 IEEE International Conference on Robotics and Automation, ICRA'07. p. 4517-4523 7 p. 4209793

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access
  13 Citations (Scopus)

• Impact behaviour of woven natural silk composite face-sheet sandwiched foam under low velocity impact

  Ude, A. U., Ariffin, A. K. & Azhari, C. H., 2013, Advanced Technologies in Manufacturing, Engineering and Materials. Vol. 774-776. p. 1242-1249 8 p. (Advanced Materials Research; vol. 774-776).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Impacts of waste management practices on water resources in harare

  Nhubu, T., Mbohwa, C., Muzenda, E. & Patel, B., 2020, Wastes: Solutions, Treatments and Opportunities III - Selected papers from the 5th International Conference Wastes: Solutions, Treatments and Opportunities, 2019. Vilarinho, C., Castro, F., Gonçalves, M. & Fernando, A. L. (eds.). CRC Press/Balkema, p. 531-536 6 p. (Wastes: Solutions, Treatments and Opportunities III - Selected papers from the 5th International Conference Wastes: Solutions, Treatments and Opportunities, 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)