Find Research outputs

Search results

• Conference article

  A systematic review of magnetron sputtering of AlN thin films for extreme condition sensing

  Mwema, F. M., Akinlabi, E. T. & Oladijo, O. P., 2020, In: Materials Today: Proceedings. 26, Part 2, p. 1546-1550 5 p.

  Research output: Contribution to journal › Conference article › peer-review
  2 Citations (Scopus)

• Attenuation potency of mineral liner to cationic migration

  Agbenyeku, E. E. & Muzenda, E., 2019, In: Procedia Manufacturing. 35, p. 941-949 9 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Biochemical methane potential analysis using cow dung, chicken manure and pig manure under mesophilic conditions

  Belaid, M., Matheri, A. N., Mdluli, N. P. & Muzenda, E., 2019, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2019, MAR, p. 1710-1718 9 p.

  Research output: Contribution to journal › Conference article › peer-review

• Bioethanol production from corn residue

  Manyuchi, M. M., Muganu, C., Mbohwa, C. & Muzenda, E., 2018, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2018, JUL, p. 2530-2539 10 p.

  Research output: Contribution to journal › Conference article › peer-review
  1 Citation (Scopus)

• Bio ethanol production from the landfill organic waste fraction

  Manyuchi, M. M., Mbohwa, C. & Muzenda, E., 2018, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2018, JUL, p. 1-5 5 p.

  Research output: Contribution to journal › Conference article › peer-review

• Biogas and Bio solids production from tea waste through anaerobic digestion

  Manyuchi, M. M., Mbohwa, C. & Muzenda, E., 2018, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2018, JUL, p. 2519-2525 7 p.

  Research output: Contribution to journal › Conference article › peer-review

• Bio methane enrichment of landfill waste biogas

  Manyuchi, M. M., Mbohwa, C., Muzenda, E. & Masebinu, S., 2017, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2017, JUL, p. 183-188 6 p.

  Research output: Contribution to journal › Conference article › peer-review
  2 Citations (Scopus)

• Bio stabilization of Jatropha Curcas cake to bio fertilizers through vermicomposting

  Manyuchi, M. M., Mbohwa, C. & Muzenda, E., 2018, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2018, JUL, p. 9-13 5 p.

  Research output: Contribution to journal › Conference article › peer-review
  1 Citation (Scopus)

• Bio treatment of Brewery Wastewater treatment using Hycura

  Manyuchi, M. M., Mbohwa, C. & Muzenda, E., 2018, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2018, SEP, p. 2641-2647 7 p.

  Research output: Contribution to journal › Conference article › peer-review

• Comparative study of spark plasma sintering features on the densification of Ni-Cr binary alloys

  Babalola, B. J., Shongwe, M. B., Obadele, B. A., Olubambi, P. A., Ayodele, O. O., Rominiyi, A. L. & Jeje, S. O., Dec 10 2018, In: MATEC Web of Conferences. 249, 01004.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  12 Citations (Scopus)

• Comparison study on the corrosion behavior of aluminum alloys in different acidic media

  Adams, F. V., Akinwamide, S. O., Obadele, B. & Olubambi, P. A., Jan 1 2021, In: Materials Today: Proceedings. 38, p. 1040-1043 4 p.

  Research output: Contribution to journal › Conference article › peer-review
  5 Citations (Scopus)

• Conditioned upshots of permeation rates as a function of vadose zone effect in engineered landfill clayey medium

  Agbenyeku, E. E. O. & Muzenda, E., 2018, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2018, NOV, p. 1278-1286 9 p.

  Research output: Contribution to journal › Conference article › peer-review

• Conductor disc used to suppress spurious mode and enhance electric coupling in a dielectric loaded combline resonator

  Pholele, T. M. & Chuma, J. M., Apr 20 2016, In: IOP Conference Series: Materials Science and Engineering. 120, 1, 012017.

  Research output: Contribution to journal › Conference article › peer-review

• Control Unit for a Coreless Stator for use with SI Engine Stepping Valve

  Zibani, I., Marumo, R., Chuma, J., Ngebani, I. & Tsamaase, K., 2018, In: Procedia Manufacturing. 21, p. 397-404 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Corrosion behavior of ductile and austempered ductile cast iron in 0.01M and 0.05M NaCl Environments.

  Akinribide, O. J., Akinwamide, S. O., Ajibola, O. O., Obadele, B. A., Olusunle, S. O. O. & Olubambi, P. A., Jan 1 2019, In: Procedia Manufacturing. 30, p. 167-172 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  2 Citations (Scopus)

• Corrosion behaviour of Al-Fe-Ti-V medium entropy alloy

  Bodunrin, M. O., Obadele, B. A., Chown, L. H. & Olubambi, P. A., Dec 21 2017, In: IOP Conference Series: Materials Science and Engineering. 272, 1, 012028.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  1 Citation (Scopus)

• Corrosion resistance potential of boron phosphide films in a naval environment

  Haddow, D., Ogwu, A. A. & Placido, F., 2003, In: Proceedings of SPIE - The International Society for Optical Engineering. 5078, p. 109-120 12 p.

  Research output: Contribution to journal › Conference article › peer-review
  4 Citations (Scopus)

• Defect formation and surface evolution of thin film materials

  Phiri, R. R., Philip Oladijo, O. & Akinlabi, E. T., 2018, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2018, NOV, p. 1087-1093 7 p.

  Research output: Contribution to journal › Conference article › peer-review
  1 Citation (Scopus)

• Densification and microstructures of hybrid sintering of titanium alloy

  Ayodele, O. O., Awotunde, M. A., Shongwe, M. B., Obadele, B. A., Babalola, B. J. & Olubambi, P. A., 2019, In: Materials Today: Proceedings. 28, p. 781-784 4 p.

  Research output: Contribution to journal › Conference article › peer-review

• Densification and tensile properties of titanium grade 4 produced using different routes

  Masikane, M. A., Johnson, O. T., Ogunmuyiwa, E. N. & Sigalas, I., 2019, In: Procedia Manufacturing. 35, p. 826-832 7 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  1 Citation (Scopus)

• Dependence of fractal characteristics on the scan size of atomic force microscopy (AFM) phase imaging of aluminum thin films

  Mwema, F. M., Akinlabi, E. T. & Oladijo, O. P., 2020, In: Materials Today: Proceedings. 26, Part 2, p. 1540-1545 6 p.

  Research output: Contribution to journal › Conference article › peer-review
  2 Citations (Scopus)

• Design of a new front-end electronics test-bench for the upgraded ATLAS detector's Tile Calorimeter

  Kureba, C. O., Govender, M., Hofsajer, I., Ruan, X., Sandrock, C. & Spoor, M., Oct 15 2015, In: Journal of Physics: Conference Series. 645, 1, 012020.

  Research output: Contribution to journal › Conference article › peer-review
  1 Citation (Scopus)

• Design of a photovoltaic system with ultracapacitor energy buffer

  Diarra, B., Zungeru, A. M., Ravi, S., Chuma, J., Basutli, B. & Zibani, I., Jan 1 2019, In: Procedia Manufacturing. 33, p. 216-223 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  3 Citations (Scopus)

• Developing an empirical relationship for optimizing surface roughness of TiC thin film grown by magnetron sputtering using Taguchi analysis

  Abegunde, O., Akinlabi, E. & Oladijo, P., 2020, In: Materials Today: Proceedings. 26, Part 2, p. 3282-3287 6 p.

  Research output: Contribution to journal › Conference article › peer-review

• Development and size distribution of polystyrene/ZnO nanofillers

  Ayeleru, O. O., Dlova, S., Ntuli, F., Kupolati, W. K. & Olubambi, P. A., 2019, In: Procedia Manufacturing. 30, p. 194-199 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  2 Citations (Scopus)

• Development of composite proton exchange membrane from polystyrene butadiene rubber and carbon nanoballs for fuel cell application

  Abdulkareem, A. S., Afolabi, A. S., Idibie, C. A., Iyuke, S. E. & Pienaar, H. C. VZ., Mar 22 2012, In: Energy Procedia. 14, p. 2026-2037 12 p.

  Research output: Contribution to journal › Conference article › peer-review
  3 Citations (Scopus)

• Development of MgAl₂O₄ grain refiner in Al in-situ composite through H₃BO₃ addition

  Chandramohan, P., Olubambi, P. A., Raghu, R. & Obadele, B. A., Nov 8 2019, In: IOP Conference Series: Materials Science and Engineering. 655, 1, 012039.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Effect of Coating Thickness on Wear Performance of Inconel 625 coating

  Phiri, R. R., Oladijo, O. P., Maledi, N. & Akinlabi, E. T., Nov 6 2018, In: IOP Conference Series: Materials Science and Engineering. 423, 1, 012159.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  6 Citations (Scopus)

• Effect of co-digestion of food waste and cow dung on biogas yield

  Emmanuel Pax, M., Muzenda, E. & Lekgoba, T., Jul 24 2020, In: E3S Web of Conferences. 181, 5 p., 01005.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Effect of CrC-Ni on the tribological behaviour of WC cemented carbide.

  Mekgwe, G. N., Tuckart, W. R., Akinribide, O. J., Langa, T., Obadele, B. A. & Olubambi, P. A., Apr 3 2019, In: IOP Conference Series: Materials Science and Engineering. 499, 1, 012012.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  4 Citations (Scopus)

• Effect of curing temperature and particle size distribution on unconfined compressive strength of raw and treated fly ash-lime modified phosphogypsum waste

  Mashifana, T., Okonta, F. & Ntuli, F., Oct 29 2019, In: IOP Conference Series: Materials Science and Engineering. 652, 1, 8 p., 12044.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Effect of graphite addition on the tribological properties of pure titanium carbonitride prepared by spark plasma sintering

  Mekgwe, G. N., Akinribide, O. J., Langa, T., Obadele, B. A., Olubambi, P. A. & Lethabane, L. M., Apr 3 2019, In: IOP Conference Series: Materials Science and Engineering. 499, 1, 012011.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Effect of interstitial filling, ball and feed size on particle breakage in a laboratory ball mill: An attainable region technique

  Tembo, P. M., Khumalo, S., Chakawa, D. P., Danha, G., Hlabangana, N. & Muzenda, E., 2019, In: Procedia Manufacturing. 35, p. 80-84 5 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Effect of media shape on particle breakage in a batch ball mill: Lessons learnt from population balance model and attainable region technique

  Khumalo, S., Hlabangana, N., Danha, G. & Muzenda, E., 2019, In: Procedia Manufacturing. 35, p. 75-79 5 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Effect of particle size and alkali-laccase on the properties of pterocarpus angolensis (Mukwa) wood flour

  Setswalo, K., Oladijo, O. P., Namoshe, M., Akinlabi, E. T. & Mokoba, M., 2019, In: Procedia Manufacturing. 35, p. 465-470 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Effect of scan rate on AFM imaging on 3D surface stereometrics of aluminum films

  Mwema, F. M., Akinlabi, E. T. & Oladijo, O. P., 2019, In: Materials Today: Proceedings. 18, Part 7, p. 2315-2321 7 p.

  Research output: Contribution to journal › Conference article › peer-review
  1 Citation (Scopus)

• Effect of stirring on solid solution hardening

  Adigun, O. D., Oni, A., Obadele, B. A., Olusunle, S. O., Abegunde, I. E. & Omonubi, K. B., 2021, In: Materials Today: Proceedings. 46, p. 7740-7744 5 p.

  Research output: Contribution to journal › Conference article › peer-review

• Effect of the operation parameters on the Fischer Tropsch synthesis process using different reactors

  Makhura, E., Rakereng, J., Rapoo, O. & Danha, G., 2019, In: Procedia Manufacturing. 35, p. 349-355 7 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Effect of TiN addition on corrosion behavior of spark plasma sintered 304L austenitic stainless steel in chloride media

  Akinwamide, S. O., Akinribide, O. J., Mafafo, M., Phumlani, M., Obadele, B. A., Abe, B. T. & Olubambi, P. A., 2019, In: Materials Today: Proceedings. 28, p. 384-387 4 p.

  Research output: Contribution to journal › Conference article › peer-review
  5 Citations (Scopus)

• Effects of biomass/coal copyrolysis parameters on the product yield: A review

  Thibanyane, N., Agachi, P. & Danha, G., 2019, In: Procedia Manufacturing. 35, p. 477-487 11 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  1 Citation (Scopus)

• Effects of combined apertures on the magnitudes of electric coupling coefficients of combline resonators

  Pholele, T. M. & Chuma, J. M., Jan 1 2014, In: IOP Conference Series: Materials Science and Engineering. 67, 1, 012005.

  Research output: Contribution to journal › Conference article › peer-review
  3 Citations (Scopus)

• Effects of Mo content on the microstructural and mechanical properties of as-cast Ti-Mo alloys

  Moshokoa, N., Raganya, L., Obadele, B., Olubambi, P. & Machaka, R., Nov 8 2019, In: IOP Conference Series: Materials Science and Engineering. 655, 1, 012015.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  5 Citations (Scopus)

• Electrochemical investigation of the stability and corrosion resistance of Boron Phosphide films prepared by PECVD

  Ogwu, A., Hellwig, T., Doherty, S., Haddow, D., Möllmann, K. P. & Placido, F., 2005, In: Proceedings of SPIE - The International Society for Optical Engineering. 5786, p. 365-372 8 p., 41.

  Research output: Contribution to journal › Conference article › peer-review
  7 Citations (Scopus)

• Environmental chemistry and mineralogy of particulate air matter around Selebi Phikwe nickel-copper plant, Botswana

  Ekosse, G., Van den Heever, D. J., De Jager, L. & Totolo, O., Feb 1 2004, In: Minerals Engineering. 17, 2, p. 349-353 5 p.

  Research output: Contribution to journal › Conference article › peer-review
  17 Citations (Scopus)

• Environmental impacts for setting up a waste to energy landfill site

  Manyuchi, M. M., Mbohwa, C., Mpeta, M. & Muzenda, E., 2019, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2019, MAR, p. 25-30 6 p.

  Research output: Contribution to journal › Conference article › peer-review

• Evaluating the usability of bio coal from sugar cane bagasse as a solid fuel

  Manyuchi, M. M., Mbohwa, C. & Muzenda, E., 2019, In: Procedia Manufacturing. 33, p. 516-521 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Evolution of surface roughness and mechanical properties of Sputtered Aluminum thin films

  Mwema, F. M., Akinlabi, E. T. & Oladijo, O. P., Dec 18 2019, In: Journal of Physics: Conference Series. 1378, 3, 032093.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Fabrication and effect of milling time on spark plasma sintered Ti6Al4V/Gr Composite

  Ayodele, O. O., Komape, T. J., Awotunde, M. A., Shongwe, M. B., Obadele, B. A., Babalola, B. J. & Olubambi, P. A., Jan 1 2019, In: Materials Today: Proceedings. 18, p. 3693-3701 9 p.

  Research output: Contribution to journal › Conference article › peer-review

• Failure-tolerant path planning for the PA-10 robot operating amongst obstacles

  Jamisola, R. S., Maciejewski, A. A. & Roberts, R. G., Jul 5 2004, In: Proceedings - IEEE International Conference on Robotics and Automation. 2004, 5, p. 4995-5000 6 p.

  Research output: Contribution to journal › Conference article › peer-review
  10 Citations (Scopus)

• Feasibility of treating brewery wastewater using bio films

  Manyuchi, M. M., Chikwama, N., Mbohwa, C. & Muzenda, E., 2018, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2018, JUL, p. 14-19 6 p.

  Research output: Contribution to journal › Conference article › peer-review