Find Research outputs

Search results

• Conference contribution

  Development of efficient image quarrying technique for Mammographic image classification to detect breast cancer with supervised learning algorithm

  Antony, S. J. S. & Ravi, S., Jan 1 2014, ICACCS 2013 - Proceedings of the 2013 International Conference on Advanced Computing and Communication Systems: Bringing to the Table, Futuristic Technologies from Around the Globe. Institute of Electrical and Electronics Engineers Inc., 6938688

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Development of VC-Ni eutectic alloys for wear resistance

  Apata, O. A., Muobeleni, T. N., Fabuyide, A. A., Ogunmuyiwa, E. N., Rading, G. O., Jain, P. K., Witcomb, M. J. & Cornish, L. A., Jan 1 2014, AMI Light Metals Conference 2014. Curle, U. A. & Möller, H. (eds.). Trans Tech Publications Ltd, p. 347-354 8 p. (Advanced Materials Research; vol. 1019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Distributed beamformer design under mixed SINR balancing and SINR-target-constraints

  Basutli, B. & Lambotharan, S., Sep 9 2015, 2015 IEEE International Conference on Digital Signal Processing, DSP 2015. Institute of Electrical and Electronics Engineers Inc., Vol. 2015-September. p. 530-534 5 p. 7251929

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Earthworms as engineers of soil and human health

  Agbenyeku, E. E. O., Muzenda, E. & Msibi, I. M., Jan 1 2015, WCECS 2015 - World Congress on Engineering and Computer Science 2015. Douglas, C., Burgstone, J., Grundfest, W. S., Burgstone, J., Douglas, C. & Ao, S. I. (eds.). Newswood Limited, Vol. 2220. p. 646-650 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Economic analysis of biogas upgrading and utilization as vehicular fuel in South Africa

  Masebinu, S. O., Aboyade, A. O. & Muzenda, E., Jan 1 2015, WCECS 2015 - World Congress on Engineering and Computer Science 2015. Douglas, C., Burgstone, J., Grundfest, W. S., Burgstone, J., Douglas, C. & Ao, S. I. (eds.). Newswood Limited, Vol. 2220. p. 579-588 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Economic optimization of a thermal cracker via model predictive control technology

  Savu, A. R., Muntean, I., Lazea, G. & Agachi, P. S., Sep 8 2011, 2011 19th Mediterranean Conference on Control and Automation, MED 2011. p. 819-824 6 p. 5983153

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• EEG-based Control of a 3D Game Using 14-channel Emotiv Epoc+

  Malete, T. N., Moruti, K., Thapelo, T. S. & Jamisola, R. S., Nov 2019, Proceedings of the IEEE 2019 9th International Conference on Cybernetics and Intelligent Systems and Robotics, Automation and Mechatronics, CIS and RAM 2019. Institute of Electrical and Electronics Engineers Inc., p. 463-468 6 p. 9095807. (Proceedings of the IEEE 2019 9th International Conference on Cybernetics and Intelligent Systems and Robotics, Automation and Mechatronics, CIS and RAM 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• EEG-Based human emotion classification using combined computational techniques for feature extraction and selection in six machine learning models

  Mohutsiwa, L. O. & Jamisola, R. S., May 6 2021, Proceedings - 5th International Conference on Intelligent Computing and Control Systems, ICICCS 2021. Institute of Electrical and Electronics Engineers Inc., p. 1095-1102 8 p. 9432207. (Proceedings - 5th International Conference on Intelligent Computing and Control Systems, ICICCS 2021).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Effect and control of suspended solids at the blast furnaces

  Afolabi, A. S., Sanusi, K. O., Abdulkareem, A. S. & Bada, O. S., Jan 31 2013, Energy, Environment and Sustainable Development. p. 954-960 7 p. (Applied Mechanics and Materials; vol. 261-262).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Effective transportation technology transfer operations for economic development in Botswana

  Oladele, A. S., 2014, Advances in Transportation. Vol. 505-506. p. 493-496 4 p. (Applied Mechanics and Materials; vol. 505-506).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Effect of AFM scan size on the scaling law of sputtered aluminium thin films

  Mwema, F. M., Akinlabi, E. T., Oladijo, O. P., Akinlabi, S. A. & Hassan, S., Sep 2020, Advances in Manufacturing Engineering - Selected Articles from ICMMPE 2019. Emamian, S. S., Yusof, F. & Awang, M. (eds.). Springer Nature, Singapore, p. 171-176 6 p. (Lecture Notes in Mechanical Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Effect of flotation parameters on recovery of South Africa nickel sulphide ore

  Afolabi, A. S., Abdulkareem, A. S. & Muzenda, E., Jan 31 2013, Energy, Environment and Sustainable Development. p. 961-968 8 p. (Applied Mechanics and Materials; vol. 261-262).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Effect of heating rate on the microstructure and mechanical properties of spark plasma sintered cnts reinforced nickel aluminide

  Ayodele, O. O., Awotunde, M. A., Shongwe, M. B., Adegbenjo, A. O., Babalola, B. J., Obadele, B. A. & Olubambi, P. A., Jan 1 2019, Key Engineering Materials IX. Korsunsky, A. M. (ed.). Trans Tech Publications Ltd, p. 440-444 5 p. (Key Engineering Materials; vol. 821 KEM).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Effect of heat treatment processes on the corrosion behaviour of NiTi shape memory alloy material in chloride and acidic media

  Sanusi, K. O., Afolabi, A. S. & Bolanle, D. I., 2014, Materials Science and Technology Conference and Exhibition 2013, MS and T 2013. Vol. 4. p. 2998-3003 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Effect of nozzle inclination on jet-impingement heat transfer in a confined cross-flow

  Ward, J., Oladiran, M. T. & Hammond, G. P., Dec 1 1991, Fundamentals of Forced Convection Heat Transfer. Publ by ASME, Vol. 181. p. 25-31 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  6 Citations (Scopus)

• Effect of pH on the floatability of base metal sulphides PGMs

  Afolabi, A. S., Muzenda, E. & Abdulkareem, S. A., Jan 1 2013, IAENG Transactions on Engineering Technologies - Special Edition of the World Congress on Engineering and Computer Science 2011. p. 239-248 10 p. (Lecture Notes in Electrical Engineering; vol. 170 LNEE).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Effect of processing technique on the mechanical properties of a functionalized superhydrophobic silane

  Baruwa, A. D., Akinlabi, E. T., Oladijo, O. P., Dutta-Majumdar, J. & Krishna, S., 2019, Advanced Manufacturing. American Society of Mechanical Engineers(ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 2A-2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Effect of relay location on two-way DF and AF relay for multi-user system in LTE-A cellular networks

  Aldhaibani, J. A., Yahya, A., Ahmad, R. B., Omar, N. & Ali, Z. G., Sep 2 2013, BEIAC 2013 - 2013 IEEE Business Engineering and Industrial Applications Colloquium. p. 380-385 6 p. 6560153

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  17 Citations (Scopus)

• Effect of silicon nitride (Si₃N₄) addition on the mechanical and tribological performance of al-fe-si alloy (AA8011)

  Fayomi, J., Popoola, A. P. I., Popoola, O. M. & Oladijo, O. P., 2020, Advanced Materials and Processing Technologies II. Zhao, Y. (ed.). Trans Tech Publications Ltd, Vol. 982. p. 34-38 5 p. (Materials Science Forum; vol. 982 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Effect of Solids Concentration in Cow Dung on Biogas Yield

  Makhura, E. P., Muzenda, E. & Lekgoba, T., Nov 2019, Proceedings of 2019 7th International Renewable and Sustainable Energy Conference, IRSEC 2019. El Hibaoui, A., Essaaidi, M. & Zaz, Y. (eds.). Institute of Electrical and Electronics Engineers Inc., 9078218. (Proceedings of 2019 7th International Renewable and Sustainable Energy Conference, IRSEC 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Effect of substrates on the microstructure of thermally sprayed WC-4.88 wt% Co coatings

  Oladijo, O. P., Venter, A. M., Cornish, L. A., Sacks, N. & Shrivastava, S., 2010, Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010. European Powder Metallurgy Association (EPMA), Vol. 3.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Effects of average grain size and misorientation angle on the deformation behaviour of nanocrystalline grain structures

  Oladele, S. K. & Samuel, A. A., Dec 1 2012, Materials Science and Technology Conference and Exhibition 2012, MS and T 2012. Vol. 1. p. 693-700 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Efficient load balancing and multicasting for uncertain-source SDN: Real-time link-cost monitoring

  Semong, T. & Xie, K., 2019, Software Engineering and Algorithms in Intelligent Systems - Proceedings of 7th Computer Science On-line Conference 2018. Silhavy, R. (ed.). Springer Verlag, Vol. 763. p. 178-187 10 p. (Advances in Intelligent Systems and Computing; vol. 763).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Eidps: An efficient approach to protect the network and intrusion prevention

  Selvaraj, R., Kuthadi, V. M. & Marwala, T., Jan 1 2016, Information Systems Design and Intelligent Applications - Proceedings of 3rd International Conference, INDIA 2016. Satapathy, S. C., Mandal, J. K., Udgata, S. K. & Bhateja, V. (eds.). Springer Verlag, p. 35-47 13 p. (Advances in Intelligent Systems and Computing; vol. 434).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Electrochemical behaviour of mild steel in some agro fluids

  Afolabi, A. S., Ogazi, A. C., Adams, F. V. & Abdulkareem, A. S., Jan 1 2014, World Congress on Engineering, WCE 2014. Douglas, C., Ao, S. I., Ao, S. I., Grundfest, W. S., Burgstone, J., Douglas, C., Burgstone, J. & Ao, S. I. (eds.). Newswood Limited, Vol. 2. p. 641-646 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Electrochemical characteristic of cathodically protected mild steel in 3.5% Nacl and 1 M H ₂ SO ₄

  Tladi, M. N. A., Maloma, R., Obadele, B. A. & Olubambi, P. A., Apr 17 2018, 2018 IEEE 9th International Conference on Mechanical and Intelligent Manufacturing Technologies, ICMIMT 2018. Institute of Electrical and Electronics Engineers Inc., p. 91-94 4 p. (2018 IEEE 9th International Conference on Mechanical and Intelligent Manufacturing Technologies, ICMIMT 2018; vol. 2018-January).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Embedded concurrent computing architecture using FPGA

  Salih, M. H., Ahmad, R. B., Yahya, A. & Arshad, M. R., Dec 1 2012, Proceedings - 2012 7th International Conference on System of Systems Engineering, SoSE 2012. p. 439-444 6 p. 6384129

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Empirical Identification of Narrowband Interference in Broadband PLC Networks at the Receiver

  Awino, S. O., Afuflo, T. J. O., Mosalaosi, M. & Akuon, P. O., Dec 31 2018, 2018 Progress In Electromagnetics Research Symposium, PIERS-Toyama 2018 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 2160-2164 5 p. 8597885. (Progress in Electromagnetics Research Symposium; vol. 2018-August).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Encoding mutually unbiased bases in orbital angular momentum for quantum key distribution

  Dudley, A., Mafu, M., Goyal, S., Giovannini, D., McLaren, M., Konrad, T., Padgett, M. J., Petruccione, F., Lütkenhaus, N. & Forbes, A., Jan 1 2014, Complex Light and Optical Forces VIII. SPIE, Vol. 8999. 89991I

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Energy attenuation capability of woven natural silk (WNS)/epoxy composites plates subjected to drop-weight impacts

  Ude, A. U., Sopian, K. & Azhari, C. H., May 28 2010, TMS 2010 - 139th Annual Meeting and Exhibition - Supplemental Proceedings. Vol. 2. p. 115-122 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Enhancing Maximum Power Point Tracking of Solar Energy Harvester to Energize Seismic Node: A Case of NNNSS Nodes

  Duncan, D., Zungeru, A. M., Mangwala, M., Diarra, B., Chuma, J. & Bokani, M., Nov 2019, 2019 IEEE Conference on Sustainable Utilization and Development in Engineering and Technologies, CSUDET 2019. Institute of Electrical and Electronics Engineers Inc., p. 224-229 6 p. 9214628. (2019 IEEE Conference on Sustainable Utilization and Development in Engineering and Technologies, CSUDET 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

• Environmental impact assessment for setting up a biogas plant

  Manyuchi, M. M., Mbohwa, C. & Muzenda, E., 2018, Proceedings of the International Conference on Industrial Engineering and Operations Management, IEOM 2018. IEOM Society, p. 25-30 6 p. (Proceedings of the International Conference on Industrial Engineering and Operations Management; vol. 2018-March).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Environmental remediation through the application of the vermicomposting technology for bio waste management

  Manyuchi, M. M., Mbohwa, C. & Muzenda, E., Mar 2020, Proceedings of the International Conference on Industrial Engineering and Operations Management. March ed. IEOM Society, p. 2918-2924 7 p. (Proceedings of the International Conference on Industrial Engineering and Operations Management; vol. 0, no. March).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

• Environmental sustainability: Multi-criteria decision analysis for resource recovery from organic fraction of municipal solid waste

  Masebinu, S. O., Akinlabi, E. T., Muzenda, E., Mbohwa, C., Aboyade, A. O. & Mahlatsi, T., Dec 27 2016, 2016 International Conference on Industrial Engineering and Engineering Management, IEEM 2016. IEEE Computer Society, Vol. 2016-December. p. 1543-1547 5 p. 7798136

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  5 Citations (Scopus)

• Erosion-wear Behaviour of 304 Stainless Steel Reinforced with TiN at Elevated Temperatures

  Mafafo, R. M., Obadele, B. A., Pilotti, B., Tuckart, W. R. & Olubambi, P. A., Aug 20 2020, Trends in Manufacturing and Engineering Management - Select Proceedings of ICMechD 2019. Vijayan, S., Subramanian, N. & Sankaranarayanasamy, K. (eds.). Springer Nature, Singapore, p. 183-191 9 p. (Lecture Notes in Mechanical Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Estimating the efficiency of Information Technology for Domain-Specific Mathematical Modelling

  Mezhuyev, V., Abdul Majid, M. & Samikannu, R., Aug 24 2015, I4CT 2015 - 2015 2nd International Conference on Computer, Communications, and Control Technology, Art Proceeding. Institute of Electrical and Electronics Engineers Inc., p. 289-293 5 p. 7219583

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Estimating the Impact of Prevention Action: A simulation Model of Cervical Cancer Progression

  Rosen-Zvi, M., Shpigelman, L., Kalton, A., Weissbrod, O., Akindeinde, S., Benefeldt, S., Bentley, A., Everett, T., Jajinskiji, J., Kweyu, E., Neti, C., Saab, J., Stewart, O., Ward, M. & Xie, G. T., 2014, e-Health - For Continuity of Care - Proceedings of MIE 2014. Pape-Haugaard, L., Seroussi Brigitte, B., Saka, O., Lovis, C., Hasman, A. & Andersen, S. K. (eds.). IOS Press, p. 288-292 5 p. (Studies in Health Technology and Informatics; vol. 205).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Estimation of Optical Wireless Communication Link Availability Using Meteorological Visibility Data for Major Locations in South Africa

  Kolawole, O., Afullo, T. & Mosalaosi, M., Jun 2019, 2019 PhotonIcs and Electromagnetics Research Symposium - Spring, PIERS-Spring 2019 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 319-325 7 p. 9017842. (Progress in Electromagnetics Research Symposium; vol. 2019-June).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Eutrophication impact potential of solid waste management options in harare

  Nhubu, T., Mbohwa, C. & Muzenda, E., 2020, Wastes: Solutions, Treatments and Opportunities III - Selected papers from the 5th International Conference Wastes: Solutions, Treatments and Opportunities, 2019. Vilarinho, C., Castro, F., Gonçalves, M. & Fernando, A. L. (eds.). CRC Press/Balkema, p. 360-366 7 p. (Wastes: Solutions, Treatments and Opportunities III - Selected papers from the 5th International Conference Wastes: Solutions, Treatments and Opportunities, 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Evaluation and analysis of Botswana gravel road condition for district transportation networks monitoring

  Oladele, A. S., 2014, Advances in Transportation. Vol. 505-506. p. 740-744 5 p. (Applied Mechanics and Materials; vol. 505-506).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Evaluation of cathodic protection performance of carbon steel pipeline buried in soil: A review

  Mahlobo, M. G. R., Mjwana, P., Tladi, M. N. A., Obadele, B. A., Olubambi, P. A. & Refait, P., Apr 17 2018, 2018 IEEE 9th International Conference on Mechanical and Intelligent Manufacturing Technologies, ICMIMT 2018. Institute of Electrical and Electronics Engineers Inc., p. 37-43 7 p. (2018 IEEE 9th International Conference on Mechanical and Intelligent Manufacturing Technologies, ICMIMT 2018; vol. 2018-January).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Evaluation of Course Management System for a University

  Masizana-Katongo, A., Mpoeleng, D. & Nkgau, T. Z., 2007, Proceedings of the 37th Conference of the Southern African Computer Lecturer Association. p. 241-245 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Evaluation of heavy metals in platinum tailing dam site

  Nkobane, M. P., Afolabi, A. S. & Abdulkareem, A. S., Jan 1 2015, WCE 2015 - World Congress on Engineering 2015. Ao, S. I., Gelman, L., Gelman, L., Hukins, D. W. L., Hunter, A., Korsunsky, A. M., Ao, S. I. & Ao, S. I. (eds.). Newswood Limited, Vol. 2218. p. 967-971 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Evaluation of natural flocculants for conventional water treatment

  Afolabi, A. S., Sigwadi, R., Abdulkareem, A. S. & Mateescu, C. M., Jan 31 2013, Mechanical Materials and Manufacturing Engineering II. p. 298-303 6 p. (Applied Mechanics and Materials; vol. 248).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Evaluation of Potential Substrates for Biogas Production via Anaerobic Digestion: A Review

  Sibiya, N. T., Muzenda, E. & Mbohwa, C., 2017, Proceedings of the World Congress on Engineering and Computer Science 2017. Ao, S. I., Douglas, C. & Grundfest, W. S. (eds.). Vol. 2. p. 583-588 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access
  1 Citation (Scopus)

• Evaluation of Process Parameters Influence on the Mechanical Properties of RF Magnetron Sputtered TiC Thin-Film Coating

  Abegunde, O. O., Akinlabi, E. T. & Oladijo, O. P., 2021, Trends in Manufacturing and Engineering Management - Select Proceedings of ICMechD 2019. Vijayan, S., Subramanian, N. & Sankaranarayanasamy, K. (eds.). Springer Nature, Singapore, p. 145-155 11 p. (Lecture Notes in Mechanical Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Evaluation of solar water heating systems in Botswana

  Oladiran, M. T. & Ossenburg, E., 2013, Advances in Materials and Systems Technologies IV. Vol. 824. p. 459-466 8 p. (Advanced Materials Research; vol. 824).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Evaluation of wear and corrosion behaviour of hybrid sintered ti6al4v alloy

  Ayodele, O. O., Awotunde, M. A., Shongwe, M. B., Adegbenjo, A. O., Babalola, B. J., Obadele, B. A. & Olubambi, P. A., Jan 1 2019, Key Engineering Materials IX. Korsunsky, A. M. (ed.). Trans Tech Publications Ltd, p. 321-326 6 p. (Key Engineering Materials; vol. 821 KEM).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Evolution of microstructure and wear properties of aluminum thin films with sputtering substrate temperature

  Mwema, F. M., Akinlabi, E. T., Oladijo, O. P. & Dutta Majumdar, J., May 13 2019, 2019 IEEE 10th International Conference on Mechanical and Intelligent Manufacturing Technologies, ICMIMT 2019. Institute of Electrical and Electronics Engineers Inc., p. 31-36 6 p. 8712046. (2019 IEEE 10th International Conference on Mechanical and Intelligent Manufacturing Technologies, ICMIMT 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Exergy and economic analyses of a hybrid solid oxide fuel cell by computer simulation

  Bilyaminu, S., Yenkwo, K. C., Saka, A. A. & Afolabi, A. S., Jan 1 2015, WCE 2015 - World Congress on Engineering 2015. Ao, S. I., Gelman, L., Gelman, L., Hukins, D. W. L., Hunter, A., Korsunsky, A. M., Ao, S. I. & Ao, S. I. (eds.). Newswood Limited, Vol. 2218. p. 785-790 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution