Find Research outputs

Search results

• Conference article

  Corrosion behaviour of Al-Fe-Ti-V medium entropy alloy

  Bodunrin, M. O., Obadele, B. A., Chown, L. H. & Olubambi, P. A., Dec 21 2017, In: IOP Conference Series: Materials Science and Engineering. 272, 1, 012028.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  1 Citation (Scopus)

• Corrosion resistance potential of boron phosphide films in a naval environment

  Haddow, D., Ogwu, A. A. & Placido, F., 2003, In: Proceedings of SPIE - The International Society for Optical Engineering. 5078, p. 109-120 12 p.

  Research output: Contribution to journal › Conference article › peer-review
  4 Citations (Scopus)

• Defect formation and surface evolution of thin film materials

  Phiri, R. R., Philip Oladijo, O. & Akinlabi, E. T., 2018, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2018, NOV, p. 1087-1093 7 p.

  Research output: Contribution to journal › Conference article › peer-review
  1 Citation (Scopus)

• Densification and tensile properties of titanium grade 4 produced using different routes

  Masikane, M. A., Johnson, O. T., Ogunmuyiwa, E. N. & Sigalas, I., 2019, In: Procedia Manufacturing. 35, p. 826-832 7 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  1 Citation (Scopus)

• Dependence of fractal characteristics on the scan size of atomic force microscopy (AFM) phase imaging of aluminum thin films

  Mwema, F. M., Akinlabi, E. T. & Oladijo, O. P., 2020, In: Materials Today: Proceedings. 26, Part 2, p. 1540-1545 6 p.

  Research output: Contribution to journal › Conference article › peer-review
  2 Citations (Scopus)

• Design of a new front-end electronics test-bench for the upgraded ATLAS detector's Tile Calorimeter

  Kureba, C. O., Govender, M., Hofsajer, I., Ruan, X., Sandrock, C. & Spoor, M., Oct 15 2015, In: Journal of Physics: Conference Series. 645, 1, 012020.

  Research output: Contribution to journal › Conference article › peer-review
  1 Citation (Scopus)

• Design of a photovoltaic system with ultracapacitor energy buffer

  Diarra, B., Zungeru, A. M., Ravi, S., Chuma, J., Basutli, B. & Zibani, I., Jan 1 2019, In: Procedia Manufacturing. 33, p. 216-223 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  3 Citations (Scopus)

• Developing an empirical relationship for optimizing surface roughness of TiC thin film grown by magnetron sputtering using Taguchi analysis

  Abegunde, O., Akinlabi, E. & Oladijo, P., 2020, In: Materials Today: Proceedings. 26, Part 2, p. 3282-3287 6 p.

  Research output: Contribution to journal › Conference article › peer-review

• Development and size distribution of polystyrene/ZnO nanofillers

  Ayeleru, O. O., Dlova, S., Ntuli, F., Kupolati, W. K. & Olubambi, P. A., 2019, In: Procedia Manufacturing. 30, p. 194-199 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  2 Citations (Scopus)

• Development of composite proton exchange membrane from polystyrene butadiene rubber and carbon nanoballs for fuel cell application

  Abdulkareem, A. S., Afolabi, A. S., Idibie, C. A., Iyuke, S. E. & Pienaar, H. C. VZ., Mar 22 2012, In: Energy Procedia. 14, p. 2026-2037 12 p.

  Research output: Contribution to journal › Conference article › peer-review
  3 Citations (Scopus)

• Development of MgAl₂O₄ grain refiner in Al in-situ composite through H₃BO₃ addition

  Chandramohan, P., Olubambi, P. A., Raghu, R. & Obadele, B. A., Nov 8 2019, In: IOP Conference Series: Materials Science and Engineering. 655, 1, 012039.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Effect of Coating Thickness on Wear Performance of Inconel 625 coating

  Phiri, R. R., Oladijo, O. P., Maledi, N. & Akinlabi, E. T., Nov 6 2018, In: IOP Conference Series: Materials Science and Engineering. 423, 1, 012159.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  6 Citations (Scopus)

• Effect of co-digestion of food waste and cow dung on biogas yield

  Emmanuel Pax, M., Muzenda, E. & Lekgoba, T., Jul 24 2020, In: E3S Web of Conferences. 181, 5 p., 01005.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Effect of CrC-Ni on the tribological behaviour of WC cemented carbide.

  Mekgwe, G. N., Tuckart, W. R., Akinribide, O. J., Langa, T., Obadele, B. A. & Olubambi, P. A., Apr 3 2019, In: IOP Conference Series: Materials Science and Engineering. 499, 1, 012012.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  4 Citations (Scopus)

• Effect of curing temperature and particle size distribution on unconfined compressive strength of raw and treated fly ash-lime modified phosphogypsum waste

  Mashifana, T., Okonta, F. & Ntuli, F., Oct 29 2019, In: IOP Conference Series: Materials Science and Engineering. 652, 1, 8 p., 12044.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Effect of graphite addition on the tribological properties of pure titanium carbonitride prepared by spark plasma sintering

  Mekgwe, G. N., Akinribide, O. J., Langa, T., Obadele, B. A., Olubambi, P. A. & Lethabane, L. M., Apr 3 2019, In: IOP Conference Series: Materials Science and Engineering. 499, 1, 012011.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Effect of interstitial filling, ball and feed size on particle breakage in a laboratory ball mill: An attainable region technique

  Tembo, P. M., Khumalo, S., Chakawa, D. P., Danha, G., Hlabangana, N. & Muzenda, E., 2019, In: Procedia Manufacturing. 35, p. 80-84 5 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Effect of media shape on particle breakage in a batch ball mill: Lessons learnt from population balance model and attainable region technique

  Khumalo, S., Hlabangana, N., Danha, G. & Muzenda, E., 2019, In: Procedia Manufacturing. 35, p. 75-79 5 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Effect of particle size and alkali-laccase on the properties of pterocarpus angolensis (Mukwa) wood flour

  Setswalo, K., Oladijo, O. P., Namoshe, M., Akinlabi, E. T. & Mokoba, M., 2019, In: Procedia Manufacturing. 35, p. 465-470 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Effect of scan rate on AFM imaging on 3D surface stereometrics of aluminum films

  Mwema, F. M., Akinlabi, E. T. & Oladijo, O. P., 2019, In: Materials Today: Proceedings. 18, Part 7, p. 2315-2321 7 p.

  Research output: Contribution to journal › Conference article › peer-review
  1 Citation (Scopus)

• Effect of stirring on solid solution hardening

  Adigun, O. D., Oni, A., Obadele, B. A., Olusunle, S. O., Abegunde, I. E. & Omonubi, K. B., 2021, In: Materials Today: Proceedings. 46, p. 7740-7744 5 p.

  Research output: Contribution to journal › Conference article › peer-review

• Effect of the operation parameters on the Fischer Tropsch synthesis process using different reactors

  Makhura, E., Rakereng, J., Rapoo, O. & Danha, G., 2019, In: Procedia Manufacturing. 35, p. 349-355 7 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Effects of biomass/coal copyrolysis parameters on the product yield: A review

  Thibanyane, N., Agachi, P. & Danha, G., 2019, In: Procedia Manufacturing. 35, p. 477-487 11 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  1 Citation (Scopus)

• Effects of combined apertures on the magnitudes of electric coupling coefficients of combline resonators

  Pholele, T. M. & Chuma, J. M., Jan 1 2014, In: IOP Conference Series: Materials Science and Engineering. 67, 1, 012005.

  Research output: Contribution to journal › Conference article › peer-review
  3 Citations (Scopus)

• Effects of Mo content on the microstructural and mechanical properties of as-cast Ti-Mo alloys

  Moshokoa, N., Raganya, L., Obadele, B., Olubambi, P. & Machaka, R., Nov 8 2019, In: IOP Conference Series: Materials Science and Engineering. 655, 1, 012015.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  5 Citations (Scopus)

• Electrochemical investigation of the stability and corrosion resistance of Boron Phosphide films prepared by PECVD

  Ogwu, A., Hellwig, T., Doherty, S., Haddow, D., Möllmann, K. P. & Placido, F., 2005, In: Proceedings of SPIE - The International Society for Optical Engineering. 5786, p. 365-372 8 p., 41.

  Research output: Contribution to journal › Conference article › peer-review
  7 Citations (Scopus)

• Environmental chemistry and mineralogy of particulate air matter around Selebi Phikwe nickel-copper plant, Botswana

  Ekosse, G., Van den Heever, D. J., De Jager, L. & Totolo, O., Feb 1 2004, In: Minerals Engineering. 17, 2, p. 349-353 5 p.

  Research output: Contribution to journal › Conference article › peer-review
  17 Citations (Scopus)

• Environmental impacts for setting up a waste to energy landfill site

  Manyuchi, M. M., Mbohwa, C., Mpeta, M. & Muzenda, E., 2019, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2019, MAR, p. 25-30 6 p.

  Research output: Contribution to journal › Conference article › peer-review

• Evaluating the usability of bio coal from sugar cane bagasse as a solid fuel

  Manyuchi, M. M., Mbohwa, C. & Muzenda, E., 2019, In: Procedia Manufacturing. 33, p. 516-521 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Evolution of surface roughness and mechanical properties of Sputtered Aluminum thin films

  Mwema, F. M., Akinlabi, E. T. & Oladijo, O. P., Dec 18 2019, In: Journal of Physics: Conference Series. 1378, 3, 032093.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Fabrication and effect of milling time on spark plasma sintered Ti6Al4V/Gr Composite

  Ayodele, O. O., Komape, T. J., Awotunde, M. A., Shongwe, M. B., Obadele, B. A., Babalola, B. J. & Olubambi, P. A., Jan 1 2019, In: Materials Today: Proceedings. 18, p. 3693-3701 9 p.

  Research output: Contribution to journal › Conference article › peer-review

• Failure-tolerant path planning for the PA-10 robot operating amongst obstacles

  Jamisola, R. S., Maciejewski, A. A. & Roberts, R. G., Jul 5 2004, In: Proceedings - IEEE International Conference on Robotics and Automation. 2004, 5, p. 4995-5000 6 p.

  Research output: Contribution to journal › Conference article › peer-review
  10 Citations (Scopus)

• Feasibility of treating brewery wastewater using bio films

  Manyuchi, M. M., Chikwama, N., Mbohwa, C. & Muzenda, E., 2018, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2018, JUL, p. 14-19 6 p.

  Research output: Contribution to journal › Conference article › peer-review

• Feasibility of using sewage sludge bio char in treating municipal sewage

  Manyuchi, M. M., Mbohwa, C. & Muzenda, E., 2018, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2018, SEP, p. 44-50 7 p.

  Research output: Contribution to journal › Conference article › peer-review

• Fretting Biocorrosion Behaviour of Titanium-Zirconia composites in Foetal Bovine Serum

  Semetse, L., Obadele, B. A., Raganya, L., Geringer, J. & Olubambi, P. A., Nov 8 2019, In: IOP Conference Series: Materials Science and Engineering. 655, 1, 012034.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• GIXRD, Raman and Surface analysis of TiC thin film coating produced by RF Magnetron Sputtering

  Abegunde, O. O., Akinlabi, E. T. & Oladijo, O. P., Dec 18 2019, In: Journal of Physics: Conference Series. 1378, 2, 022032.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  1 Citation (Scopus)

• Gold value addition and beneficiation for women in the mining sector

  Manyuchi, M. M., Mbohwa, C. & Muzenda, E., 2019, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. July, p. 1258-1264 7 p.

  Research output: Contribution to journal › Conference article › peer-review

• Heart Disease Diagnosis via Nonparametric Mixture Models

  Mufudza, C. & Erol, H., Apr 18 2017, In: Journal of Advances in Mathematics and Computer Sciences. 27, 5, p. 1-17 17 p., JAMCS.40440.

  Research output: Contribution to journal › Conference article › peer-review

• Implementation of Lean manufacturing tools in an abattoir: A case study of a Botswana Private Beef Abattoir

  Kufigwa, B., Gwangwava, N., Addo-Tenkorang, R., Ogunmuyiwa, E. N. & Ude, A. U., 2018, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2018, NOV, p. 368-380 13 p.

  Research output: Contribution to journal › Conference article › peer-review

• Influence of Heat Treatment on Microstructure and Mechanical Properties of Ni-Fe-Co Ternary Alloy Prepared via Spark Plasma Sintering

  Bopape, I. M. C., Shongwe, M. B., Ogunmuyiwa, E. N., Rominiyi, A. L. & Jeje, S. O., Nov 8 2019, In: IOP Conference Series: Materials Science and Engineering. 655, 1, 012030.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Influence of Sintering Temperature on Hardness and Wear Properties of TiN Nano Reinforced SAF 2205

  Oke, S. R., Ige, O. O., Falodun, O. E., Obadele, B. A., Mphalele, M. R. & Olubambi, P. A., Dec 21 2017, In: IOP Conference Series: Materials Science and Engineering. 272, 1, 012030.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  3 Citations (Scopus)

• Influence of Surface Treatment on Dry Sliding Wear Behavior of Hydrophobic Silane Coating on AISI 304

  Baruwa, A. D., Oladijo, O. P., Maledi, N. & Akinlabi, E. T., Nov 6 2018, In: IOP Conference Series: Materials Science and Engineering. 423, 1, 012158.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  3 Citations (Scopus)

• Influence of TiC thin film growth morphology deposited by RF magnetron sputtering on the mechanical and tribology properties of Ti6Al4V

  Abegunde, O., Akinlabi, E. & Oladijo, P., 2020, In: Materials Today: Proceedings. 26, Part 2, p. 1469-1472 4 p.

  Research output: Contribution to journal › Conference article › peer-review
  1 Citation (Scopus)

• Inormation storage and retrieval techniques for mobile healthcare

  Anderson, G., Asare, S. D., Eyitayo, A. O., Eyitayo, O. T., Mpoeleng, D., Nkgau, T. Z., Nyongesa, H. & Ogwu, F., Jul 3 2007, In: International Conference on Advanced Communication Technology, ICACT. 2, p. 1096-1100 5 p., 4195350.

  Research output: Contribution to journal › Conference article › peer-review
  3 Citations (Scopus)

• Integrated Biomass utilization for energy efficiency and nutrient recycling

  Manyuchi, M. M., Stinner, W., Mbohwa, C. & Muzenda, E., 2018, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2018, SEP, p. 120-128 9 p.

  Research output: Contribution to journal › Conference article › peer-review

• Integrative municipal sewage sludge management through biogas production: A case study of municipal plants in Harare, Zimbabwe

  Manyuchi, M. M., Patsanza, T. & Muzenda, E., 2018, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2018, SEP, p. 1-9 9 p.

  Research output: Contribution to journal › Conference article › peer-review

• Intra-cluster photoelectron interactions: Scattering and dissociative attachment in halide-methyl halide cluster anions

  Mabbs, R., Van Duzor, M., Mbaiwa, F. & Wei, J., Dec 24 2009, In: Journal of Physics: Conference Series. 194, 5, 052034.

  Research output: Contribution to journal › Conference article › peer-review

• Investigating the feasibility of using agricultural waste as an adsorbent of gold ions in small scale gold processing plants

  Tapfuma, A., Chakawa, D. P., Moyo, L. B., Hlabangana, N., Danha, G. & Muzenda, E., 2019, In: Procedia Manufacturing. 35, p. 85-90 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Investigation of mineral deportment in a copper ore from Botswana

  Poloko, N., Moatlhodi, L. K. & Danha, G., Sep 19 2019, In: IOP Conference Series: Materials Science and Engineering. 641, 1, 012024.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Joint Channel and Phase Noise Estimation in MIMO-OFDM Systems

  Ngebani, I. M., Chuma, J. M., Zibani, I., Matlotse, E. & Tsamaase, K., May 11 2017, In: IOP Conference Series: Materials Science and Engineering. 198, 1, 012007.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  1 Citation (Scopus)