Find Research outputs

Search results

• Conference contribution

  Development of VC-Ni eutectic alloys for wear resistance

  Apata, O. A., Muobeleni, T. N., Fabuyide, A. A., Ogunmuyiwa, E. N., Rading, G. O., Jain, P. K., Witcomb, M. J. & Cornish, L. A., Jan 1 2014, AMI Light Metals Conference 2014. Curle, U. A. & Möller, H. (eds.). Trans Tech Publications Ltd, p. 347-354 8 p. (Advanced Materials Research; vol. 1019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Eutectics 100%
  • Wear resistance 88%
  • Vanadium 58%
  • Carbides 46%
  • Nickel 44%
  2 Citations (Scopus)

• Distributed beamformer design under mixed SINR balancing and SINR-target-constraints

  Basutli, B. & Lambotharan, S., Sep 9 2015, 2015 IEEE International Conference on Digital Signal Processing, DSP 2015. Institute of Electrical and Electronics Engineers Inc., Vol. 2015-September. p. 530-534 5 p. 7251929

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Beamforming 100%
  • Parallel algorithms 95%
  • Quality of service 79%
  3 Citations (Scopus)

• Earthworms as engineers of soil and human health

  Agbenyeku, E. E. O., Muzenda, E. & Msibi, I. M., Jan 1 2015, WCECS 2015 - World Congress on Engineering and Computer Science 2015. Douglas, C., Burgstone, J., Grundfest, W. S., Burgstone, J., Douglas, C. & Ao, S. I. (eds.). Newswood Limited, Vol. 2220. p. 646-650 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Soils 100%
  • Health 93%
  • Engineers 89%
  • Fertilizers 40%
  • Fungi 29%

• Economic analysis of biogas upgrading and utilization as vehicular fuel in South Africa

  Masebinu, S. O., Aboyade, A. O. & Muzenda, E., Jan 1 2015, WCECS 2015 - World Congress on Engineering and Computer Science 2015. Douglas, C., Burgstone, J., Grundfest, W. S., Burgstone, J., Douglas, C. & Ao, S. I. (eds.). Newswood Limited, Vol. 2220. p. 579-588 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Biogas 100%
  • Economic analysis 95%
  • Gases 49%
  • Costs 33%
  • Gasoline 27%
  3 Citations (Scopus)

• Economic optimization of a thermal cracker via model predictive control technology

  Savu, A. R., Muntean, I., Lazea, G. & Agachi, P. S., Sep 8 2011, 2011 19th Mediterranean Conference on Control and Automation, MED 2011. p. 819-824 6 p. 5983153

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Ethylene 100%
  • Model predictive control 95%
  • Economics 61%
  • Chemical plants 58%
  • Olefins 57%
  3 Citations (Scopus)

• EEG-based Control of a 3D Game Using 14-channel Emotiv Epoc+

  Malete, T. N., Moruti, K., Thapelo, T. S. & Jamisola, R. S., Nov 2019, Proceedings of the IEEE 2019 9th International Conference on Cybernetics and Intelligent Systems and Robotics, Automation and Mechatronics, CIS and RAM 2019. Institute of Electrical and Electronics Engineers Inc., p. 463-468 6 p. 9095807. (Proceedings of the IEEE 2019 9th International Conference on Cybernetics and Intelligent Systems and Robotics, Automation and Mechatronics, CIS and RAM 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Electroencephalography 100%
  • Game 51%
  • Machine Learning 23%
  • Brain 23%
  • Training 22%
  1 Citation (Scopus)

• EEG-Based human emotion classification using combined computational techniques for feature extraction and selection in six machine learning models

  Mohutsiwa, L. O. & Jamisola, R. S., May 6 2021, Proceedings - 5th International Conference on Intelligent Computing and Control Systems, ICICCS 2021. Institute of Electrical and Electronics Engineers Inc., p. 1095-1102 8 p. 9432207. (Proceedings - 5th International Conference on Intelligent Computing and Control Systems, ICICCS 2021).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Feature Extraction 100%
  • Emotion 92%
  • Feature Selection 89%
  • Electroencephalogram (EEG) 88%
  • Computational Techniques 81%

• Effect and control of suspended solids at the blast furnaces

  Afolabi, A. S., Sanusi, K. O., Abdulkareem, A. S. & Bada, O. S., Jan 31 2013, Energy, Environment and Sustainable Development. p. 954-960 7 p. (Applied Mechanics and Materials; vol. 261-262).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Blast furnaces 100%
  • Forestry 38%
  • Reverse osmosis 37%
  • Phenols 36%
  • Effluents 32%

• Effective transportation technology transfer operations for economic development in Botswana

  Oladele, A. S., 2014, Advances in Transportation. Vol. 505-506. p. 493-496 4 p. (Applied Mechanics and Materials; vol. 505-506).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Technology transfer 100%
  • Economics 50%
  • Websites 11%
  • Catalysts 11%
  • Availability 9%

• Effect of AFM scan size on the scaling law of sputtered aluminium thin films

  Mwema, F. M., Akinlabi, E. T., Oladijo, O. P., Akinlabi, S. A. & Hassan, S., Sep 2020, Advances in Manufacturing Engineering - Selected Articles from ICMMPE 2019. Emamian, S. S., Yusof, F. & Awang, M. (eds.). Springer Nature, Singapore, p. 171-176 6 p. (Lecture Notes in Mechanical Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Scaling Law 100%
  • Scaling laws 89%
  • Atomic force microscopy 88%
  • Thin films 65%
  • Atomic Force Microscopy 54%

• Effect of flotation parameters on recovery of South Africa nickel sulphide ore

  Afolabi, A. S., Abdulkareem, A. S. & Muzenda, E., Jan 31 2013, Energy, Environment and Sustainable Development. p. 961-968 8 p. (Applied Mechanics and Materials; vol. 261-262).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Flotation 100%
  • Sulfides 93%
  • Ores 92%
  • Nickel 75%
  • Recovery 55%

• Effect of heating rate on the microstructure and mechanical properties of spark plasma sintered cnts reinforced nickel aluminide

  Ayodele, O. O., Awotunde, M. A., Shongwe, M. B., Adegbenjo, A. O., Babalola, B. J., Obadele, B. A. & Olubambi, P. A., Jan 1 2019, Key Engineering Materials IX. Korsunsky, A. M. (ed.). Trans Tech Publications Ltd, p. 440-444 5 p. (Key Engineering Materials; vol. 821 KEM).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Heating rate 100%
  • Electric sparks 90%
  • Ball mills 88%
  • Nickel 83%
  • Ball Mill 83%

• Effect of heat treatment processes on the corrosion behaviour of NiTi shape memory alloy material in chloride and acidic media

  Sanusi, K. O., Afolabi, A. S. & Bolanle, D. I., 2014, Materials Science and Technology Conference and Exhibition 2013, MS and T 2013. Vol. 4. p. 2998-3003 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Shape memory effect 100%
  • Heat treatment 80%
  • Corrosion 69%
  • Aerospace materials 28%
  • Marine applications 25%

• Effect of nozzle inclination on jet-impingement heat transfer in a confined cross-flow

  Ward, J., Oladiran, M. T. & Hammond, G. P., Dec 1 1991, Fundamentals of Forced Convection Heat Transfer. Publ by ASME, Vol. 181. p. 25-31 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Nozzle 100%
  • Heat Transfer 91%
  • Jet 90%
  • Nozzles 73%
  • Heat transfer 56%
  6 Citations (Scopus)

• Effect of pH on the floatability of base metal sulphides PGMs

  Afolabi, A. S., Muzenda, E. & Abdulkareem, S. A., Jan 1 2013, IAENG Transactions on Engineering Technologies - Special Edition of the World Congress on Engineering and Computer Science 2011. p. 239-248 10 p. (Lecture Notes in Electrical Engineering; vol. 170 LNEE).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Platinum 100%
  • Sulfides 98%
  • Recovery 57%
  • Metals 54%
  • Chemical properties 47%

• Effect of processing technique on the mechanical properties of a functionalized superhydrophobic silane

  Baruwa, A. D., Akinlabi, E. T., Oladijo, O. P., Dutta-Majumdar, J. & Krishna, S., 2019, Advanced Manufacturing. American Society of Mechanical Engineers(ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 2A-2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Atomic layer deposition 100%
  • Superhydrophobicity 87%
  • Silanes 83%
  • Chemical vapor deposition 76%
  • Mechanical properties 42%

• Effect of relay location on two-way DF and AF relay for multi-user system in LTE-A cellular networks

  Aldhaibani, J. A., Yahya, A., Ahmad, R. B., Omar, N. & Ali, Z. G., Sep 2 2013, BEIAC 2013 - 2013 IEEE Business Engineering and Industrial Applications Colloquium. p. 380-385 6 p. 6560153

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Long Term Evolution (LTE) 100%
  • Wireless networks 22%
  • Throughput 20%
  17 Citations (Scopus)

• Effect of silicon nitride (Si₃N₄) addition on the mechanical and tribological performance of al-fe-si alloy (AA8011)

  Fayomi, J., Popoola, A. P. I., Popoola, O. M. & Oladijo, O. P., 2020, Advanced Materials and Processing Technologies II. Zhao, Y. (ed.). Trans Tech Publications Ltd, Vol. 982. p. 34-38 5 p. (Materials Science Forum; vol. 982 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Silicon nitride 100%
  • silicon nitrides 80%
  • Nitride 79%
  • Alloy 57%
  • composite materials 50%
  1 Citation (Scopus)

• Effect of Solids Concentration in Cow Dung on Biogas Yield

  Makhura, E. P., Muzenda, E. & Lekgoba, T., Nov 2019, Proceedings of 2019 7th International Renewable and Sustainable Energy Conference, IRSEC 2019. El Hibaoui, A., Essaaidi, M. & Zaz, Y. (eds.). Institute of Electrical and Electronics Engineers Inc., 9078218. (Proceedings of 2019 7th International Renewable and Sustainable Energy Conference, IRSEC 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Biogas 100%
  • Anaerobic digestion 75%
  • Methane 53%
  • Gases 32%
  • Animals 27%

• Effect of substrates on the microstructure of thermally sprayed WC-4.88 wt% Co coatings

  Oladijo, O. P., Venter, A. M., Cornish, L. A., Sacks, N. & Shrivastava, S., 2010, Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010. European Powder Metallurgy Association (EPMA), Vol. 3.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Residual Stress 100%
  • Coatings 84%
  • Microhardness 81%
  • Substrates 79%
  • Microstructure 76%

• Effects of average grain size and misorientation angle on the deformation behaviour of nanocrystalline grain structures

  Oladele, S. K. & Samuel, A. A., Dec 1 2012, Materials Science and Technology Conference and Exhibition 2012, MS and T 2012. Vol. 1. p. 693-700 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Crystal microstructure 100%
  • Grain Size 74%
  • Polycrystalline Solid 47%
  • Polycrystals 36%
  • Plastic Deformation 32%

• Efficient load balancing and multicasting for uncertain-source SDN: Real-time link-cost monitoring

  Semong, T. & Xie, K., 2019, Software Engineering and Algorithms in Intelligent Systems - Proceedings of 7th Computer Science On-line Conference 2018. Silhavy, R. (ed.). Springer Verlag, Vol. 763. p. 178-187 10 p. (Advances in Intelligent Systems and Computing; vol. 763).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Multicasting 100%
  • Software defined networking 90%
  • Telecommunication links 73%
  • Resource allocation 67%
  • Next generation networks 50%
  1 Citation (Scopus)

• Eidps: An efficient approach to protect the network and intrusion prevention

  Selvaraj, R., Kuthadi, V. M. & Marwala, T., Jan 1 2016, Information Systems Design and Intelligent Applications - Proceedings of 3rd International Conference, INDIA 2016. Satapathy, S. C., Mandal, J. K., Udgata, S. K. & Bhateja, V. (eds.). Springer Verlag, p. 35-47 13 p. (Advances in Intelligent Systems and Computing; vol. 434).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Servers 100%
  • Intrusion detection 70%
  • Cloud computing 60%
  • Internet 46%
  • Viruses 40%

• Electrochemical behaviour of mild steel in some agro fluids

  Afolabi, A. S., Ogazi, A. C., Adams, F. V. & Abdulkareem, A. S., Jan 1 2014, World Congress on Engineering, WCE 2014. Douglas, C., Ao, S. I., Ao, S. I., Grundfest, W. S., Burgstone, J., Douglas, C., Burgstone, J. & Ao, S. I. (eds.). Newswood Limited, Vol. 2. p. 641-646 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Carbon steel 100%
  • Fluids 68%
  • Corrosion rate 51%
  • Corrosion 35%
  • Cathodic polarization 18%
  1 Citation (Scopus)

• Electrochemical characteristic of cathodically protected mild steel in 3.5% Nacl and 1 M H ₂ SO ₄

  Tladi, M. N. A., Maloma, R., Obadele, B. A. & Olubambi, P. A., Apr 17 2018, 2018 IEEE 9th International Conference on Mechanical and Intelligent Manufacturing Technologies, ICMIMT 2018. Institute of Electrical and Electronics Engineers Inc., p. 91-94 4 p. (2018 IEEE 9th International Conference on Mechanical and Intelligent Manufacturing Technologies, ICMIMT 2018; vol. 2018-January).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Sodium chloride 100%
  • Carbon steel 88%
  • Chronoamperometry 66%
  • Open Circuit Potential 53%
  • Corrosion 51%
  1 Citation (Scopus)

• Embedded concurrent computing architecture using FPGA

  Salih, M. H., Ahmad, R. B., Yahya, A. & Arshad, M. R., Dec 1 2012, Proceedings - 2012 7th International Conference on System of Systems Engineering, SoSE 2012. p. 439-444 6 p. 6384129

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Field programmable gate arrays (FPGA) 100%
  • Multitasking 51%
  2 Citations (Scopus)

• Empirical Identification of Narrowband Interference in Broadband PLC Networks at the Receiver

  Awino, S. O., Afuflo, T. J. O., Mosalaosi, M. & Akuon, P. O., Dec 31 2018, 2018 Progress In Electromagnetics Research Symposium, PIERS-Toyama 2018 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 2160-2164 5 p. 8597885. (Progress in Electromagnetics Research Symposium; vol. 2018-August).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Communication 100%
  • Frequency bands 96%
  • Telecommunication networks 95%
  • Interference suppression 67%
  • Data communication systems 48%
  2 Citations (Scopus)

• Encoding mutually unbiased bases in orbital angular momentum for quantum key distribution

  Dudley, A., Mafu, M., Goyal, S., Giovannini, D., McLaren, M., Konrad, T., Padgett, M. J., Petruccione, F., Lütkenhaus, N. & Forbes, A., Jan 1 2014, Complex Light and Optical Forces VIII. SPIE, Vol. 8999. 89991I

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Quantum Key Distribution 100%
  • Angular Momentum 83%
  • Light modulators 82%
  • Mutually Unbiased Bases 81%
  • Quantum cryptography 81%
  1 Citation (Scopus)

• Energy attenuation capability of woven natural silk (WNS)/epoxy composites plates subjected to drop-weight impacts

  Ude, A. U., Sopian, K. & Azhari, C. H., May 28 2010, TMS 2010 - 139th Annual Meeting and Exhibition - Supplemental Proceedings. Vol. 2. p. 115-122 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Silk 100%
  • silk 99%
  • Plate Like Crystal 58%
  • attenuation 57%
  • composite materials 45%
  1 Citation (Scopus)

• Enhancing Maximum Power Point Tracking of Solar Energy Harvester to Energize Seismic Node: A Case of NNNSS Nodes

  Duncan, D., Zungeru, A. M., Mangwala, M., Diarra, B., Chuma, J. & Bokani, M., Nov 2019, 2019 IEEE Conference on Sustainable Utilization and Development in Engineering and Technologies, CSUDET 2019. Institute of Electrical and Electronics Engineers Inc., p. 224-229 6 p. 9214628. (2019 IEEE Conference on Sustainable Utilization and Development in Engineering and Technologies, CSUDET 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

  • Solar Energy 100%
  • solar energy 74%
  • Harvesters 63%
  • Energy harvesting 55%
  • Node 51%

• Environmental impact assessment for setting up a biogas plant

  Manyuchi, M. M., Mbohwa, C. & Muzenda, E., 2018, Proceedings of the International Conference on Industrial Engineering and Operations Management, IEOM 2018. IEOM Society, p. 25-30 6 p. (Proceedings of the International Conference on Industrial Engineering and Operations Management; vol. 2018-March).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Environmental impact assessments 100%
  • Environmental Impact Assessment 96%
  • Biogas 94%
  • Sewage Sludge 42%
  • Safety 40%

• Environmental remediation through the application of the vermicomposting technology for bio waste management

  Manyuchi, M. M., Mbohwa, C. & Muzenda, E., Mar 2020, Proceedings of the International Conference on Industrial Engineering and Operations Management. March ed. IEOM Society, p. 2918-2924 7 p. (Proceedings of the International Conference on Industrial Engineering and Operations Management; vol. 0, no. March).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

  • Environmental Restoration and Remediation 100%
  • Remediation 79%
  • Fertilizers 78%
  • Waste management 75%
  • Waste Management 71%

• Environmental sustainability: Multi-criteria decision analysis for resource recovery from organic fraction of municipal solid waste

  Masebinu, S. O., Akinlabi, E. T., Muzenda, E., Mbohwa, C., Aboyade, A. O. & Mahlatsi, T., Dec 27 2016, 2016 International Conference on Industrial Engineering and Engineering Management, IEEM 2016. IEEE Computer Society, Vol. 2016-December. p. 1543-1547 5 p. 7798136

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Resource Recovery 100%
  • Municipal Solid Waste 97%
  • Municipal solid waste 86%
  • Multi-criteria Decision Analysis 83%
  • Decision theory 78%
  5 Citations (Scopus)

• Erosion-wear Behaviour of 304 Stainless Steel Reinforced with TiN at Elevated Temperatures

  Mafafo, R. M., Obadele, B. A., Pilotti, B., Tuckart, W. R. & Olubambi, P. A., Aug 20 2020, Trends in Manufacturing and Engineering Management - Select Proceedings of ICMechD 2019. Vijayan, S., Subramanian, N. & Sankaranarayanasamy, K. (eds.). Springer Nature, Singapore, p. 183-191 9 p. (Lecture Notes in Mechanical Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Erosion (Wear) 100%
  • Erosion 54%
  • Austenitic stainless steel 52%
  • Brittle Fracture 40%
  • Wear of materials 40%

• Estimating the efficiency of Information Technology for Domain-Specific Mathematical Modelling

  Mezhuyev, V., Abdul Majid, M. & Samikannu, R., Aug 24 2015, I4CT 2015 - 2015 2nd International Conference on Computer, Communications, and Control Technology, Art Proceeding. Institute of Electrical and Electronics Engineers Inc., p. 289-293 5 p. 7219583

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Information technology 100%
  • Semantics 15%
  1 Citation (Scopus)

• Estimating the Impact of Prevention Action: A simulation Model of Cervical Cancer Progression

  Rosen-Zvi, M., Shpigelman, L., Kalton, A., Weissbrod, O., Akindeinde, S., Benefeldt, S., Bentley, A., Everett, T., Jajinskiji, J., Kweyu, E., Neti, C., Saab, J., Stewart, O., Ward, M. & Xie, G. T., 2014, e-Health - For Continuity of Care - Proceedings of MIE 2014. Pape-Haugaard, L., Seroussi Brigitte, B., Saka, O., Lovis, C., Hasman, A. & Andersen, S. K. (eds.). IOS Press, p. 288-292 5 p. (Studies in Health Technology and Informatics; vol. 205).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Uterine Cervical Neoplasms 100%
  • Eastern Africa 48%
  • Kenya 42%
  • Screening 16%
  • Action Potentials 16%

• Estimation of Optical Wireless Communication Link Availability Using Meteorological Visibility Data for Major Locations in South Africa

  Kolawole, O., Afullo, T. & Mosalaosi, M., Jun 2019, 2019 PhotonIcs and Electromagnetics Research Symposium - Spring, PIERS-Spring 2019 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 319-325 7 p. 9017842. (Progress in Electromagnetics Research Symposium; vol. 2019-June).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Fog 100%
  • Visibility 69%
  • Telecommunication links 63%
  • Communication 63%
  • Availability 49%

• Eutrophication impact potential of solid waste management options in harare

  Nhubu, T., Mbohwa, C. & Muzenda, E., 2020, Wastes: Solutions, Treatments and Opportunities III - Selected papers from the 5th International Conference Wastes: Solutions, Treatments and Opportunities, 2019. Vilarinho, C., Castro, F., Gonçalves, M. & Fernando, A. L. (eds.). CRC Press/Balkema, p. 360-366 7 p. (Wastes: Solutions, Treatments and Opportunities III - Selected papers from the 5th International Conference Wastes: Solutions, Treatments and Opportunities, 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • solid waste 100%
  • waste management 96%
  • eutrophication 96%
  • waste treatment 58%
  • municipal solid waste 52%
  2 Citations (Scopus)

• Evaluation and analysis of Botswana gravel road condition for district transportation networks monitoring

  Oladele, A. S., 2014, Advances in Transportation. Vol. 505-506. p. 740-744 5 p. (Applied Mechanics and Materials; vol. 505-506).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Gravel roads 100%
  • Monitoring 32%
  • Deterioration 14%
  • Gravel 9%
  • Network performance 8%

• Evaluation of cathodic protection performance of carbon steel pipeline buried in soil: A review

  Mahlobo, M. G. R., Mjwana, P., Tladi, M. N. A., Obadele, B. A., Olubambi, P. A. & Refait, P., Apr 17 2018, 2018 IEEE 9th International Conference on Mechanical and Intelligent Manufacturing Technologies, ICMIMT 2018. Institute of Electrical and Electronics Engineers Inc., p. 37-43 7 p. (2018 IEEE 9th International Conference on Mechanical and Intelligent Manufacturing Technologies, ICMIMT 2018; vol. 2018-January).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Cathodic Protection 100%
  • Cathodic protection 87%
  • Pipeline 84%
  • Carbon steel 68%
  • Soil 61%
  2 Citations (Scopus)

• Evaluation of Course Management System for a University

  Masizana-Katongo, A., Mpoeleng, D. & Nkgau, T. Z., 2007, Proceedings of the 37th Conference of the Southern African Computer Lecturer Association. p. 241-245 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Evaluation of heavy metals in platinum tailing dam site

  Nkobane, M. P., Afolabi, A. S. & Abdulkareem, A. S., Jan 1 2015, WCE 2015 - World Congress on Engineering 2015. Ao, S. I., Gelman, L., Gelman, L., Hukins, D. W. L., Hunter, A., Korsunsky, A. M., Ao, S. I. & Ao, S. I. (eds.). Newswood Limited, Vol. 2218. p. 967-971 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Tailings 100%
  • Heavy metals 99%
  • Platinum 89%
  • Dams 86%
  • Metals 32%

• Evaluation of natural flocculants for conventional water treatment

  Afolabi, A. S., Sigwadi, R., Abdulkareem, A. S. & Mateescu, C. M., Jan 31 2013, Mechanical Materials and Manufacturing Engineering II. p. 298-303 6 p. (Applied Mechanics and Materials; vol. 248).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Water treatment 100%
  • Polyelectrolytes 52%
  • Seed 47%
  • Water 43%
  • Aluminum sulfate 38%

• Evaluation of Potential Substrates for Biogas Production via Anaerobic Digestion: A Review

  Sibiya, N. T., Muzenda, E. & Mbohwa, C., 2017, Proceedings of the World Congress on Engineering and Computer Science 2017. Ao, S. I., Douglas, C. & Grundfest, W. S. (eds.). Vol. 2. p. 583-588 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

  • anaerobic digestion 100%
  • biogas 98%
  • methane 76%
  • substrate 69%
  • evaluation 48%
  1 Citation (Scopus)

• Evaluation of Process Parameters Influence on the Mechanical Properties of RF Magnetron Sputtered TiC Thin-Film Coating

  Abegunde, O. O., Akinlabi, E. T. & Oladijo, O. P., 2021, Trends in Manufacturing and Engineering Management - Select Proceedings of ICMechD 2019. Vijayan, S., Subramanian, N. & Sankaranarayanasamy, K. (eds.). Springer Nature, Singapore, p. 145-155 11 p. (Lecture Notes in Mechanical Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Thin films 100%
  • Coatings 79%
  • Mechanical properties 68%
  • Sputtering 57%
  • Wear 49%

• Evaluation of solar water heating systems in Botswana

  Oladiran, M. T. & Ossenburg, E., 2013, Advances in Materials and Systems Technologies IV. Vol. 824. p. 459-466 8 p. (Advanced Materials Research; vol. 824).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Solar water heaters 100%
  • Heating 50%
  • Water 38%
  • Inspection 26%
  • Systems analysis 26%

• Evaluation of wear and corrosion behaviour of hybrid sintered ti6al4v alloy

  Ayodele, O. O., Awotunde, M. A., Shongwe, M. B., Adegbenjo, A. O., Babalola, B. J., Obadele, B. A. & Olubambi, P. A., Jan 1 2019, Key Engineering Materials IX. Korsunsky, A. M. (ed.). Trans Tech Publications Ltd, p. 321-326 6 p. (Key Engineering Materials; vol. 821 KEM).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Wear 100%
  • Corrosion 80%
  • Wear of materials 77%
  • Alloy 74%
  • Potentiodynamic polarization 47%

• Evolution of microstructure and wear properties of aluminum thin films with sputtering substrate temperature

  Mwema, F. M., Akinlabi, E. T., Oladijo, O. P. & Dutta Majumdar, J., May 13 2019, 2019 IEEE 10th International Conference on Mechanical and Intelligent Manufacturing Technologies, ICMIMT 2019. Institute of Electrical and Electronics Engineers Inc., p. 31-36 6 p. 8712046. (2019 IEEE 10th International Conference on Mechanical and Intelligent Manufacturing Technologies, ICMIMT 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Sputtering 100%
  • Thin films 73%
  • Wear 73%
  • Aluminum 60%
  • Wear of materials 57%
  3 Citations (Scopus)

• Exergy and economic analyses of a hybrid solid oxide fuel cell by computer simulation

  Bilyaminu, S., Yenkwo, K. C., Saka, A. A. & Afolabi, A. S., Jan 1 2015, WCE 2015 - World Congress on Engineering 2015. Ao, S. I., Gelman, L., Gelman, L., Hukins, D. W. L., Hunter, A., Korsunsky, A. M., Ao, S. I. & Ao, S. I. (eds.). Newswood Limited, Vol. 2218. p. 785-790 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Solid oxide fuel cells (SOFC) 100%
  • Exergy 98%
  • Methane 86%
  • Economics 59%
  • Ethanol 59%

• Experimental and calculated THz spectra of analgesics

  Lepodise, L. M., Lewis, R. A. & Horvat, J., Oct 12 2017, 2017 42nd International Conference on Infrared, Millimeter, and Terahertz Waves, IRMMW-THz 2017. IEEE Computer Society, 8067049. (International Conference on Infrared, Millimeter, and Terahertz Waves, IRMMW-THz).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Density functional theory 100%
  • Absorption spectra 97%
  • Benzene 80%