Find Research outputs

Search results

• Conference contribution

  A search for pulsations in two Algol-type systems V1241 Tau and GQ Dra

  Ulaş, B., Ulusoy, C., Gazeas, K., Erkan, N. & Liakos, A., Mar 3 2014, Precision Asteroseismology. Guzik, J., Chaplin, W., Chaplin, W., Handler, G. & Pigulski, A. (eds.). S301 ed. p. 507-508 2 p. (Proceedings of the International Astronomical Union; vol. 9, no. S301).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access
  2 Citations (Scopus)

• A solution of the graetz problem in tubes of arbitrary cross-section shape for viscoelastic fluids

  Barrera, C. H., Letelier, M. F. & Siginer, D. A., 2014, Fluids Engineering Systems and Technologies. American Society of Mechanical Engineers (ASME), Vol. 7.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Assessing the potential to produce shoe wax using agricultural waste bio char as an additive

  Manyuchi, M. M., Hondo, T., Mbohwa, C., Muzenda, E. & Mpeta, M., 2019, 4th North American IEOM Conference. IEOM 2019. IEOM Society, p. 1-4 4 p. (Proceedings of the International Conference on Industrial Engineering and Operations Management).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Assessment of performance of the SHAO-C tropospheric delay correction model over low latitude and complex topography

  Ejigu, Y. G. & Tsidu, G. M., Aug 4 2016, Proceedings of 2016 International Conference on Localization and GNSS, ICL-GNSS 2016. Institute of Electrical and Electronics Engineers Inc., 7533860

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Assessment of solar-coal hybrid electricity power generating systems

  Oladiran, M. T., Kiravu, C. & Plumb, O. A., Dec 1 2010, Proceedings of the 3rd IASTED African Conference on Power and Energy Systems, AfricaPES 2010. p. 74-82 9 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Assumption-free noise suppression for autonomous tractors tracking

  Marata, L., Chuma, J. M., Yahya, A. & Ngebani, I., Dec 5 2016, 2016 IEEE Radio and Antenna Days of the Indian Ocean, RADIO 2016. Institute of Electrical and Electronics Engineers Inc., 7772035

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Asteroseismology of the Kepler target KIC 9204718

  Ulusoy, C., Stateva, I., Iliev, I. K., Ulaş, B. & Napetova, M., Sep 8 2017, Wide-Field Variability Surveys: A 21st Century Perspective - 22nd Los Alamos Stellar Pulsation - Conference Series Meeting. Gieren, W., Catelan, M., Gieren, W. & Catelan, M. (eds.). EDP Sciences, 05004. (EPJ Web of Conferences; vol. 152).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

• A sustainable conceptual model for pyrolysis to power project using lignocellulosic waste

  Charis, G., Danha, G. & Muzenda, E., 2020, Proceedings of the 2nd African International Conference on Industrial Engineering and Operations Management, 2020. IEOM Society, p. 388-400 13 p. (Proceedings of the International Conference on Industrial Engineering and Operations Management; vol. 59).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Autonomous underwater vehicle motion tracking using a Kalman filter for sensor fusion

  Holtzhausen, S., Matsebe, O., Tlale, N. S. & Bright, G., 2008, 15th International Conference on Mechatronics and Machine Vision in Practice, M2VIP'08. p. 103-108 6 p. 4749515

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  5 Citations (Scopus)

• A wireless sensor network solution for monitoring water quality in Botswana

  Pule, M., Yahya, A. & Chuma, J., Oct 28 2016, NICS 2016 - Proceedings of 2016 3rd National Foundation for Science and Technology Development Conference on Information and Computer Science. Hung, N. L., Boo, V. N. Q. & Duy, T. T. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 12-16 5 p. 7725635

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Battling the challenges of training nurses to use information systems through theory-based training material design

  Galani, M., Yu, P., Paas, F. & Chandler, P., Jan 1 2014, Investing in E-Health: People, Knowledge and Technology for a Healthy Future - Selected Papers from the 22nd Australian National Health Informatics Conference, HIC 2014. Schaper, L. K., Grain, H. & Martin-Sanchez, F. (eds.). IOS Press, p. 32-37 6 p. (Studies in Health Technology and Informatics; vol. 204).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  4 Citations (Scopus)

• Behavioural comparison of mortar and concrete properties in the presence of a modified zeolite additive

  Ikotun, B. D., Afolabi, A. S. & Ikotun, A. G., 2012, Advances and Trends in Engineering Materials and Their Applications - Proceedings of Can 2012 11th AES-ATEMA International Conference. p. 261-270 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Bio char production from sugar cane bagasse and its application sugarcane processing wastewater treatment

  Manyuchi, M. M., Mbohwa, C. & Muzenda, E., Mar 2020, Proceedings of the International Conference on Industrial Engineering and Operations Management. March ed. IEOM Society, p. 2900-2906 7 p. (Proceedings of the International Conference on Industrial Engineering and Operations Management; vol. 0, no. March).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

• Biogas use as fuel in spark ignition engines

  Kukoyi, T. O., Muzenda, E., Akinlabi, E. T., Mashamba, A., Mbohwa, C. & Mahlatsi, T., Dec 27 2016, 2016 International Conference on Industrial Engineering and Engineering Management, IEEM 2016. IEEE Computer Society, Vol. 2016-December. p. 1064-1069 6 p. 7798041

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Biohydrogen production by bacterial granules adapted to grow at different thermophilic temperatures

  Obazu, F. O., Afolabi, A. S., Daramola, M. O. & Gray, V. M., Jan 1 2015, WCE 2015 - World Congress on Engineering 2015. Ao, S. I., Gelman, L., Gelman, L., Hukins, D. W. L., Hunter, A., Korsunsky, A. M., Ao, S. I. & Ao, S. I. (eds.). Newswood Limited, Vol. 2218. p. 924-928 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Bio-methane generation from organic waste: A review

  Muzenda, E., Jan 1 2014, World Congress on Engineering, WCE 2014. Douglas, C., Ao, S. I., Ao, S. I., Grundfest, W. S., Burgstone, J., Douglas, C., Burgstone, J. & Ao, S. I. (eds.). Newswood Limited, Vol. 2. p. 647-652 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  9 Citations (Scopus)

• Bio-oil from Pine Residues-Yields, Quality and Potential Applications A case study on the valorization of Zimbabwe's Timber Residues

  Charis, G., Danha, G., Muzenda, E. & Nkosi, N. P., Nov 2019, Proceedings of 2019 7th International Renewable and Sustainable Energy Conference, IRSEC 2019. El Hibaoui, A., Essaaidi, M. & Zaz, Y. (eds.). Institute of Electrical and Electronics Engineers Inc., 9078324. (Proceedings of 2019 7th International Renewable and Sustainable Energy Conference, IRSEC 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Blackboard as a tool for peer learning and interaction for engineering students

  Uziak, J. & Oladiran, M. T., Jan 1 2012, Advances in Materials and Systems Technologies III. p. 591-599 9 p. (Advanced Materials Research; vol. 367).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  4 Citations (Scopus)

• Boron suboxide materials with rare-earth metal oxide additives

  Johnson, O. T., Ogunmuyiwa, E. N., Sigalas, I. & Hermann, M., Nov 25 2013, Proceedings of the World Congress on Engineering 2013, WCE 2013. Vol. 1 LNECS. p. 501-505 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Broadband analysis and characterization of noise for in-door power-line communication channels

  Mosalaosi, M. & Afullo, T. J. O., 2014, Progress in Electromagnetics Research Symposium. Electromagnetics Academy, p. 719-723 5 p. (Progress in Electromagnetics Research Symposium).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Building an expert system for HIV and aids information

  Masizana-Katongo, A., Leburu-Dingalo, T. & Mpoeleng, D., Jul 1 2010, Electronic Engineering and Computing Technology. Springer International Publishing AG, p. 323-333 11 p. (Lecture Notes in Electrical Engineering; vol. 60 LNEE).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Buoyancy driven non-Newtonian flows in enclosures

  Valenzuela-Rendon, A. & Siginer, D. A., 1992, Recent Advances in Non-Newtonian Flows. Publ by ASME, Vol. 153. p. 67-74 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Call admission control in cloud radio access networks

  Sigwele, T., Pillai, P. & Hu, Y. F., Dec 12 2014, Proceedings - 2014 International Conference on Future Internet of Things and Cloud, FiCloud 2014. Institute of Electrical and Electronics Engineers Inc., p. 31-36 6 p. 6984171. (Proceedings - 2014 International Conference on Future Internet of Things and Cloud, FiCloud 2014).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  13 Citations (Scopus)

• Can business process modeling bridge the gap between business and information systems?

  Zhao, L., Letsholo, K., Chioasca, E. V., Sampaio, S. & Sampaio, P., Jul 12 2012, 27th Annual ACM Symposium on Applied Computing, SAC 2012. p. 1723-1724 2 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  7 Citations (Scopus)

• Case-based reasoning system for predicting the sustainability of a telecentre

  Ayoung, A. D., Sigweni, B. & Abbott, P., Feb 17 2016, 2015 10th International Conference for Internet Technology and Secured Transactions, ICITST 2015. Institute of Electrical and Electronics Engineers Inc., p. 125-130 6 p. 7412072

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• CFD simulation of the portal vein blood flow

  Botar, C. C., Vasile, T., Sfrangeu, S., Clichici, S., Agachi, P. S., Badea, R., Mircea, P., Cristea, M. V. & Moldovan, R., Dec 1 2009, International Conference on Advancements of Medicine and Health Care through Technology. Vol. 26. p. 359-362 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  6 Citations (Scopus)

• Characterisation of the residual stresses in HVOF WC-CO coatings and substrates

  Venter, A. M., Oladijo, O. P., Cornish, L. A. & Sacks, N., 2014, International Conference on Residual Stresses 9 (ICRS 9). Vol. 768-769. p. 280-285 6 p. (Materials Science Forum; vol. 768-769).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Characteristic region based image steganography using Speeded-Up Robust Features technique

  Hamid, N., Yahya, A., Ahmad, R. B. & Al-Qershi, O., Jul 2 2012, 2012 International Conference on Future Communication Networks, ICFCN 2012. p. 141-146 6 p. 6206858

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  12 Citations (Scopus)

• Characterization and kinetics of biofuel produced from waste cooking oil

  Emeji, I. C., Afolabi, A. S., Abdulkareem, A. S. & Kalala, J., Jan 1 2015, WCECS 2015 - World Congress on Engineering and Computer Science 2015. Douglas, C., Burgstone, J., Grundfest, W. S., Burgstone, J., Douglas, C. & Ao, S. I. (eds.). Newswood Limited, Vol. 2220. p. 589-592 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  5 Citations (Scopus)

• Characterization of sintered boron suboxide with nickel compounds

  Johnson, O. T., Ogunmuyiwa, E. N., Sigalas, I. & Afolabi, A. S., Jan 1 2015, WCE 2015 - World Congress on Engineering 2015. Ao, S. I., Gelman, L., Gelman, L., Hukins, D. W. L., Hunter, A., Korsunsky, A. M., Ao, S. I. & Ao, S. I. (eds.). Newswood Limited, Vol. 2218. p. 752-756 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Chemical spray pyrolysis path to synthesis of ZnO microsausages from aggregation of elongated double tipped nanoparticles

  Muiva, C., Sathiaraj, S. T. & Maabong, K., Jan 30 2012, THERMEC 2011. p. 2577-2582 6 p. (Materials Science Forum; vol. 706-709).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  10 Citations (Scopus)

• Comparative study of some numerical methods to solve a 3D advection-diffusion equation

  Appadu, A. R., Djoko, J. K. & Gidey, H. H., Jul 21 2017, International Conference of Numerical Analysis and Applied Mathematics, ICNAAM 2016. Simos, T. E., Simos, T. E. & Tsitouras, C. (eds.). American Institute of Physics Inc., 030009. (AIP Conference Proceedings; vol. 1863).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Comparison of additive manufacturing processes for rapid casting for tooling application using the analytic hierarchy process (AHP)

  Nyembwe, K., De Beer, D., Van Der Walt, K., Bhero, S. & Katuku, K., 2012, 42nd International Conference on Computers and Industrial Engineering 2012, CIE 2012. Vol. 1. p. 145-159 15 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Comparison of different optimized irregular sparse 2D ultrasound arrays

  Diarra, B., Roux, E., Liebgott, H., Ravi, S., Robini, M., Tortoli, P. & Cachard, C., Nov 1 2016, 2016 IEEE International Ultrasonics Symposium, IUS 2016. IEEE Computer Society, Vol. 2016-November. 7728414

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Complex pressure pulses in micro-channels magnetically induced

  Leteller, M. F., Stockle, J. S., Siginer, D. A. & Ulloa, F. A., Jan 1 2010, Proceedings of the ASME International Mechanical Engineering Congress and Exposition 2009, IMECE 2009. PART A ed. American Society of Mechanical Engineers (ASME), Vol. 9. p. 81-90 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Concept Development for Reconfigurable Bending Press Tools' (RBPTs) Modules Using a Novel Methodology

  Gwangwava, N., Mpofu, K., Tlale, N. & Yu, Y., Jan 1 2013, 11th IFAC Workshop on Intelligent Manufacturing Systems, IMS 2013. 7 ed. IFAC Secretariat, Vol. 46. p. 354-359 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Conductor disc used to suppress spurious mode and enhance electric coupling in a dielectric loaded combline resonator

  Pholele, T. M. & Chuma, J. M., Nov 9 2015, 2015 IEEE Radio and Antenna Days of the Indian Ocean, RADIO 2015. Institute of Electrical and Electronics Engineers Inc., 7323396

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Conduit flow control through magnetorheology

  Letelier, M. F., Stockle, J. S. & Siginer, D. A., Dec 1 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011. PARTS A AND B ed. Vol. 6. p. 211-216 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Conjunctive use of geophysical techniques in optimizing the groundwater potential in the Kunyere and Gomoti areas of the Okavango Delta, Botswana

  Shemang, E. M., Molwalefhe, L. N. & Ntsatsi, J., 2006, 19th Symposium on the Application of Geophysics to Engineering and Environmental Problems, SAGEEP 2006: Geophysical Applications for Environmental and Engineering Hazzards - Advances and Constraints. Vol. 1. p. 871-885 15 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Constitutive theory for macromolecular media

  Siginer, D. A. & Yanovsky, Y. G., 1993, Developments in Non - Newtonian Flows. Siginer, D. A., VanArsdale, W. E., Altan, C. M. & Alexandrou, A. N. (eds.). Publ by ASME, Vol. 175. p. 35 1 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Continuous decontamination of metal-polluted mine water using engineered hybrid adsorbent

  Muliwa, A. M., Onyango, M. S., Maity, A. & Ochieng, A., 2018, Proceedings of the 2018 Annual Sustainable Research and Innovation (SRI) Conference. Kenya, p. 155-158 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

• Contributing evidence to data-driven ontology evaluation workflow ontologies perspective

  Hlomani, H. & Stacey, D. A., Nov 21 2013, IC3K 2013; KEOD 2013 - 5th International Conference on Knowledge Engineering and Ontology Development, Proceedings. p. 207-213 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  7 Citations (Scopus)

• Controlled surface treatment of mild steel with carbon nanotubes at austenitic temperature

  Afolabi, A. S., Hassan, A. S. & Daramola, M. O., Jan 1 2015, WCECS 2015 - World Congress on Engineering and Computer Science 2015. Douglas, C., Burgstone, J., Grundfest, W. S., Burgstone, J., Douglas, C. & Ao, S. I. (eds.). Newswood Limited, Vol. 2220. p. 614-618 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Cooperative Orientation Control of Fixed-Wing Drones Using Relative Jacobian

  Jamisola, R. S., Elijah, T. & Mbedzi, O., 2021, Proceedings - 2nd International Conference on Smart Electronics and Communication, ICOSEC 2021. Institute of Electrical and Electronics Engineers Inc., p. 566-573 8 p. (Proceedings - 2nd International Conference on Smart Electronics and Communication, ICOSEC 2021).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Coordinated multicell beamforming with local and global data rate constraints

  Elsabae, R., Basutli, B., Ghanem, K., Gong, Y. & Lambotharan, S., Nov 28 2016, 2016 24th European Signal Processing Conference, EUSIPCO 2016. European Signal Processing Conference, EUSIPCO, Vol. 2016-November. p. 1388-1392 5 p. 7760476

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Correspondence between experiment and theory of bulk electrocrystallisation at solid electrodes in aqueous electrolyte

  Andersen, J. E. T., 2008, ECS Transactions - Molecular Structure of the Solid-Liquid Interface and its Relationship to Electrodeposition 6 - 214th ECS Meeting. 46 ed. Vol. 16. p. 25-35 11 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Corrosion behaviour of mild steel in biodiesel prepared from ghee butter

  Ononiwu, G. I., Adams, F. V., Joseph, I. V. & Afolabi, A. S., Jan 1 2015, WCE 2015 - World Congress on Engineering 2015. Ao, S. I., Gelman, L., Gelman, L., Hukins, D. W. L., Hunter, A., Korsunsky, A. M., Ao, S. I. & Ao, S. I. (eds.). Newswood Limited, Vol. 2218. p. 858-862 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Corrosion behaviour of spark plasma sintered Ti-6Al-4V with Nano-TiN addition in different media

  Falodun, O. E., Obadele, B. A., Oke, S. R., Maja, M. E., Ige, O. O. & Olubambi, P. A., Apr 17 2018, 2018 IEEE 9th International Conference on Mechanical and Intelligent Manufacturing Technologies, ICMIMT 2018. Institute of Electrical and Electronics Engineers Inc., p. 60-63 4 p. (2018 IEEE 9th International Conference on Mechanical and Intelligent Manufacturing Technologies, ICMIMT 2018; vol. 2018-January).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Corrosion cracking of a mild steel in orange juice

  Afolabi, A. S., Ngwenya, T. G., Sanusi, K. O. & Abdulkareem, A. S., Nov 25 2013, Proceedings of the World Congress on Engineering 2013, WCE 2013. Vol. 1 LNECS. p. 512-515 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Creep behaviour and adhesion properties of TiC thin film coating grown by RF magnetron sputtering

  Olayinka, A., Akinlabi, E. T. & Oladijo, O. P., 2020, Advances in Manufacturing Engineering - Selected Articles from ICMMPE 2019. Emamian, S. S., Yusof, F. & Awang, M. (eds.). Springer Nature, Singapore, p. 69-76 8 p. (Lecture Notes in Mechanical Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution