Search concepts
|
Selected filters
|
- 750 - 800 out of 4,629 results
Search results
-
Conference contribution
Investigation of Cu (II) removal from synthetic solution by ion exchange using south african clinoptilolite
Kabuba, J., Muzenda, E., Ntuli, F. & Mulaba-Bafubiandi, A., 2013, IAENG Transactions on Engineering Technologies - Special Edition of the World Congress on Engineering and Computer Science 2011. Vol. 170 LNEE. p. 249-261 13 p. (Lecture Notes in Electrical Engineering; vol. 170 LNEE).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Investigation of the tensile properties of heat treated Ti-Mo alloys
Raganya, L., Moshokoa, N., Obadele, B. A., Olubambi, P. A. & Machaka, R., Jul 2 2020, Materials Today: Proceedings . Vol. 38. p. 1044 - 1048 5 p. (Materials Today: Proceedings).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Investigation of the treatment of wastewater using activated sludge process
Afolabi, A. S., Johnson, O., Abdukareem, A. S. & Oluwaseyi, B. S., Jan 31 2013, Energy, Environment and Sustainable Development. p. 969-976 8 p. (Applied Mechanics and Materials; vol. 261-262).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
ITREE: Intelligent traffic and resource elastic energy scheme for cloud-RAN
Sigwele, T., Pillai, P. & Hu, Y. F., Oct 19 2015, Proceedings - 2015 International Conference on Future Internet of Things and Cloud, FiCloud 2015 and 2015 International Conference on Open and Big Data, OBD 2015. Younas, M., Awan, I. & Mecella, M. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 282-288 7 p. 7300829. (Proceedings - 2015 International Conference on Future Internet of Things and Cloud, FiCloud 2015 and 2015 International Conference on Open and Big Data, OBD 2015).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
15 Citations (Scopus) -
Kimberlites Prospecting in Bastar: Future Perspectives
Verma, R., Nov 11 2000, Proc. Nat. Symposium on Milestones in Petrology at the end of the Millennium and future perspective: Dept. of Geology, BHU.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Open AccessFile -
Kinematic Analysis of a Critical Road Section Along the Lengpui Airport Road, Mizoram, India,
Verma, R., Nov 20 2020, International Webinar on Natural Hazards and Management: Institute of Geology, Karelian Research Centre, Russian Academy of Sciences, Petrozavodsk, Russia.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Open AccessFile -
Kinematics Analyses of Elephant Rock Section, NH- 44 A, Aizawl, Mizoram
Verma, R., Aug 14 2018, Conference on Geological and Environmental Sustainability: OMIX INTERNATIONAL.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Open AccessFile -
Landslide Hazard Estimation in Hunthar Veng Section, Aizawl, Mizoram
Verma, R., Mar 28 2014, Landslide Hazard Estimation in Hunthar Veng Section, Aizawl, Mizoram: Kumaun University, Nanital, India.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Open AccessFile1 Downloads (Pure) -
Landslide Hazard Estimation in Thakthing Veng Road Section, Aizawl, Mizoram.
Verma, R., 2014, Geology, Geotectonics, Geo-Hazards and Natural Resources of North East India.: Dept. of Geology, PUC, Aizawl, India.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Open AccessFile -
Landslide hazard in Aizawl Township, Mizoram, India
Verma, R., Jun 6 2010, National Workshop on Landslide and Environmental Degradation in Hilly Terrain: L.S.M. Govt. P.G. College, Pithoragarh, Uttaranchal, India.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Open AccessFile -
Landslide Hazard in Mizoram: Case Study of Laipuitlang Landslide, Aizawl.
Verma, R., Sep 17 2014, XII IAEG Congress, : Torino, Italy.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Open AccessFile -
Landslide Hazard Zonation Along NH54A From Lunglawn to Zotlang, Lunglei District, Mizoram
Verma, R., Nov 17 2020, International Seminar on Recent Advances in Science and Technology: Mizoram University, Aizawl, Mizoram.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Open AccessFile -
Landslide Hazard Zonation Along NH-54A from Lunglawn to Zotlang, Lunglei District, Mizoram, India
Verma, R., Nov 19 2020, International Webinar on Natural Hazards and Management: Bundelkhand University & Institute of Geology, KRC, RAS, Petrozavodsk, Russia.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Open AccessFile -
Landslide Problems in Mizoram: A Case Study of Ngaizel Landslide, Aizawl, Mizoram.
Verma, R., 2012, Geology, Biodiversity and Natural Resources of Himalaya and their Intellectual Property Rights: Dept. of Geology, L.S.M. Degree College, Pithoragarh,India.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Open AccessFile -
Landslide Problems in Mizoram: Causes and Remedies
Verma, R., Mar 21 2001, Nat. Symposium on Geology and Environment of Lesser Himalaya: Deptt. of Geology, Kumaun University, Nainital, India.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Open AccessFile -
Leadership in the mining sector: A functional approach for optimum team performance in the fourth industrial revolution
Manyuchi, M. M., Mbohwa, C. & Muzenda, E., 2020, Proceedings of the International Conference on Industrial Engineering and Operations Management. March ed. IEOM Society, p. 2932-2936 5 p. (Proceedings of the International Conference on Industrial Engineering and Operations Management; vol. 0, no. March).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Open Access -
Learning reactive robot behavior for autonomous valve turning
Ahmadzadeh, S. R., Kormushev, P., Jamisola, R. S. & Caldwell, D. G., Jan 1 2015, 2014 IEEE-RAS International Conference on Humanoid Robots, Humanoids 2014. IEEE Computer Society, Vol. 2015-February. p. 366-373 8 p. 7041386Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
2 Citations (Scopus) -
Leveraging user knowledge: Design principles for an intuitive user interface for building workflows
Kotowski, D., Henriques, G., Gillespie, M. G., Hlomani, H. & Stacey, D. A., 2011, KEOD 2011 - Proceedings of the International Conference on Knowledge Engineering and Ontology Development. p. 176-182 7 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Linear and exponential kinetic modelling for biogas production in municipal waste
Manyuchi, M. M., Mbohwa, C. & Muzenda, E., 2018, Proceedings of the International Conference on Industrial Engineering and Operations Management, IEOM 2018. IEOM Society, p. 31-36 6 p. (Proceedings of the International Conference on Industrial Engineering and Operations Management; vol. 2018-March).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Liquid metallurgy synthesis and thermo-electrical characterization of copper-aluminum metal matrix composite
Osoba, O. L., Afolabi, A. S., Vodal, E. & Fasuba, O. A., Jul 8 2013, Materials Science and Chemical Engineering. p. 650-655 6 p. (Advanced Materials Research; vol. 699).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Logistics & supply chains management tracking networks: Data-management system integration / interfacing issues
Addo-Tenkorang, R., Helo, P. T., Shamsuzzoha, A. H. M., Ehrs, M. & Phuong, D., Nov 1 2012, 2012 Proceedings of Portland International Center for Management of Engineering and Technology: Technology Management for Emerging Technologies, PICMET'12. p. 2198-2206 9 p. 6304234Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
4 Citations (Scopus) -
Logistics tracking: An implementation issue for delivery network
Shamsuzzoha, A., Addo-Tenkorang, R., Phuong, D. & Helo, P., 2011, PICMET'11 - Portland International Center for Management of Engineering and Technology, Proceedings - Technology Management in the Energy-Smart World. 6017949Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
5 Citations (Scopus) -
Low complexity burst allocation algorithm with high frame utilization for Mobile WiMAX (802.16e)
Ali, Z. G., Ahmad, R. B., Yahya, A., Hassnawi, L. A. & Aldhaibani, J. A., Sep 2 2013, BEIAC 2013 - 2013 IEEE Business Engineering and Industrial Applications Colloquium. p. 404-409 6 p. 6560158Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
1 Citation (Scopus) -
Magnetorheological flow in pipes: An exploration of the time-variation of herschel-bulkley parameters
Letelier, M. F., Stockle, J. S. & Siginer, D. A., Jan 1 2007, Heat Transfer, Fluid Flows, and Thermal Systems. American Society of Mechanical Engineers (ASME), Vol. 8. p. 1947-1952 6 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
1 Citation (Scopus) -
Magnitudes of coupling coefficients of horizontal and vertical slots in a dual mode filter
Pholele, T. M. & Chuma, J. M., 2010, Proceedings of the 3rd IASTED African Conference on Modelling and Simulation, AfricaMS 2010. p. 1-4 4 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Manipulation of organic and inorganic colloidal particles by dielectrophoretic forces
Asmatulu, R. & Siginer, D., Jan 1 2007, Micro and Nano Systems. American Society of Mechanical Engineers (ASME), Vol. 11. p. 81-84 4 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Martensite and nanocrystalline phase formation in rapidly solidified Ni2MnGa alloy by melt-spinning
Prasad, R. V. S. & Phanikumar, G., 2010, Solidification and Gravity V. Trans Tech Publications Ltd, p. 35-40 6 p. (Materials Science Forum; vol. 649).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
3 Citations (Scopus) -
Mathematical modelling of magneto-hydrodynamic dampers with time-varying fluid properties
Letelier, M. F., Rouliez, J. P., Siginer, D. A. & Corral, O. F., Dec 1 2005, American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED. Vol. 261 FED. p. 913-918 6 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
6 Citations (Scopus) -
Mathematical model on magnetic drug targeting in a permeable microvessel
Shaw, S., Sibanda, P. & Murthy, P. V. S. N., 2013, Biomedical and Biotechnology Engineering. American Society of Mechanical Engineers (ASME), Vol. 3 B.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
1 Citation (Scopus) -
Mathematicians and planetary challenges
Engler, H., Apte, A., da Silva Dias, P. L., Esteban, M. J., Lungu, E. & Sagastizabal, C., 2018, Invited Lectures. Sirakov, B., de Souza, P. N. & Viana, M. (eds.). World Scientific Publishing Co. Pte Ltd, p. 1111-1124 14 p. (Proceedings of the International Congress of Mathematicians, ICM 2018; vol. 1).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
MATLAB/Simulink based design and development of a Buck Boost converter as a smooth starter for DC motor control
Rajeswari, R., Ravi, S., Mezhuyev, V. & Kumarakrishnan, V., Oct 5 2015, Proceedings of the IEEE International Conference on Soft-Computing and Network Security, ICSNS 2015. Institute of Electrical and Electronics Engineers Inc., 7292440Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
1 Citation (Scopus) -
Measurement study on the end-to-end data transmission in motorways surveillance system using Wireless Ad Hoc Camera Networks (WAHCN)
Hassnawi, L. A., Ahmad, R. B., Yahya, A., Elshaikh, M., Al-Rawi, A. A. A., Ali, Z. G. & Aljunid, S. A., Dec 1 2011, Proceedings - 2nd International Conference on Engineering and Industries, ICEI 2011. p. 26-30 5 p. 6218522Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
1 Citation (Scopus) -
Mechanical properties of hot-pressed boron suboxide with chromium boride additive
Ogunmuyiwa, E. N., Johnson, O. T., Sigalas, I., Hermann, M. & Afolabi, A. S., Jan 1 2014, World Congress on Engineering, WCE 2014. Douglas, C., Ao, S. I., Ao, S. I., Grundfest, W. S., Burgstone, J., Douglas, C., Burgstone, J. & Ao, S. I. (eds.). Newswood Limited, Vol. 2. p. 632-636 5 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
1 Citation (Scopus) -
Methane production from anaerobic co-digestion of cow dung, chicken manure, pig manure and sewage waste
Sebola, M. R., Tesfagiorgis, H. B. & Muzenda, E., Jan 1 2015, WCE 2015 - World Congress on Engineering 2015. Ao, S. I., Gelman, L., Korsunsky, A. M., Ao, S. I., Hukins, D. W. L., Hunter, A., Ao, S. I. & Gelman, L. (eds.). Newswood Limited, Vol. 2217. p. 592-598 7 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
3 Citations (Scopus) -
Microstructure and corrosion behaviour of TiC reinforced duplex stainless steels matrix composites sythesized by laser melt injection
Obadele, B., Olubambi, P. & Johnson, O., May 15 2012, Extraction and Processing Division - 2012 EPD Congress - Held During the TMS 2012 Annual Meeting and Exhibition. p. 33-40 8 p. (TMS Annual Meeting).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Microstructure and dry sliding wear property of laser clad Ti-6Al-4V under different counterface materials
Obadele, B. A., Olubambi, P. A. & Pityana, S., Jan 1 2014, AMI Light Metals Conference 2014. Curle, U. A. & Möller, H. (eds.). Trans Tech Publications Ltd, p. 259-265 7 p. (Advanced Materials Research; vol. 1019).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
2 Citations (Scopus) -
Microstructure and magnetic properties of rapidly solidified Ni 2(Mn,Fe)Ga Heusler alloys
Prasad, R. V. S., Manivel Raja, M. & Phanikumar, G., 2009, NEMS/MEMS Technology and Devices - Selected, peer reviewed papers from the International Conference on Materials for Advanced Technologies 2009, ICMAT 2009. p. 215-218 4 p. (Advanced Materials Research; vol. 74).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
7 Citations (Scopus) -
Microstructure and mechanical properties of ultra-fine grained copper processed by equal channel angular pressing technique
Sanusi, K. O., Afolabi, A. S. & Muzenda, E., Jan 1 2014, World Congress on Engineering, WCE 2014. Douglas, C., Ao, S. I., Ao, S. I., Grundfest, W. S., Burgstone, J., Douglas, C., Burgstone, J. & Ao, S. I. (eds.). Newswood Limited, Vol. 2. p. 1049-1053 5 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
3 Citations (Scopus) -
Microstructure and wear behaviour of Al/TiB 2 metal matrix composite
Popoola, A. P., Pityana, S. & Ogunmuyiwa, E., 2011, Laser and Plasma Applications in Materials Science, LAPAMS 2010. Vol. 227. p. 23-26 4 p. (Advanced Materials Research; vol. 227).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
10 Citations (Scopus) -
Mineral Processing Plant Simulator in Continuous Surface Mining
Frimpong, S., Er, G. K. & Suglo, R. S., 2003, 12th International Symposium on Mine Planning and Equipment Selection. 1 ed. p. 365-368 4 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
1 Citation (Scopus) -
Mine stope performance assessment in unfavorable rock mass conditions using neural network-based classifiers
Adoko, A. C., Yakubov, K. & Alipov, A., 2019, 5th ISRM Young Scholars' Symposium on Rock Mechanics and International Symposium on Rock Engineering for Innovative Future, YSRM 2019. International Society for Rock Mechanics and Rock Engineering, p. 451-456 6 p. (5th ISRM Young Scholars' Symposium on Rock Mechanics and International Symposium on Rock Engineering for Innovative Future, YSRM 2019).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
2 Citations (Scopus) -
Minimax method for the inversion of Fredholm equations of the first kind and the determination of linear relaxation spectra
Yanovsky, Y. G., Basistov, Y. A. & Siginer, D. A., 1995, Developments and Applications of Non-Newtonian Flows. ASME, Vol. 231. p. 39-52 14 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Mobile WiMAX resource allocation design goals: Key features/factors/issues
Ali, Z. G., Ahmad, R. B., Yahya, A. & Hassnawi, L. A., Jan 1 2014, Advanced in Computer Science and Its Applications, CSA 2013. Springer Verlag, p. 661-667 7 p. (Lecture Notes in Electrical Engineering; vol. 279 LNEE).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Modeling a Hybrid Pavement Conditions Performance Framework for Botswana District Road Transportation Networks
Oladele, A. S., 2017, Airfield and Highway Pavements 2017: Design, Construction, Evaluation, and Management of Pavements - Proceedings of the International Conference on Highway Pavements and Airfield Technology 2017. Ozer, H., Velez-Vega, E. M., Al-Qadi, I. L. & Murrell, S. (eds.). American Society of Civil Engineers (ASCE), p. 156-165 10 p. (Airfield and Highway Pavements 2017: Design, Construction, Evaluation, and Management of Pavements - Proceedings of the International Conference on Highway Pavements and Airfield Technology 2017; vol. 2017-August).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Modeling high-Q square spiral with variable segment width and spacing
Kobe, O. B., Chuma, J. M., Jamisola, R. S. & Chose, M., Dec 5 2016, 2016 IEEE Radio and Antenna Days of the Indian Ocean, RADIO 2016. Institute of Electrical and Electronics Engineers Inc., 7772019Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Open Access -
Modeling of the mechanical responses of nanocrystalline metals and alloys
Sanusi, K. O., Afolabi, A. S., Muzenda, E. & Akinlabi, E. T., Jan 1 2015, WCE 2015 - World Congress on Engineering 2015. Ao, S. I., Gelman, L., Gelman, L., Hukins, D. W. L., Hunter, A., Korsunsky, A. M., Ao, S. I. & Ao, S. I. (eds.). Newswood Limited, Vol. 2218. p. 1177-1182 6 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Modeling the kinematics of an Autonomous Underwater Vehicle for range-bearing simultaneous localization and Mapping
Matsebe, O., Holtzhausen, S., Kumile, C. M. & Tlale, N. S., 2008, 15th International Conference on Mechatronics and Machine Vision in Practice, M2VIP'08. p. 412-417 6 p. 4749569Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
2 Citations (Scopus) -
Modelling and control of an anfis temperature controller for plastic extrusion process
Ravi, S. & Balakrishnan, P. A., Dec 1 2010, 2010 IEEE International Conference on Communication Control and Computing Technologies, ICCCCT 2010. p. 314-320 7 p. 5670572Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
17 Citations (Scopus) -
Modelling climate change effects on sustainable transport facilities through time series and rainfall trend analysis of Palapye-Botswana
Oladelea, A. S., Fagbamigbeb, A. F. & Bafitlhilec, T. M., 2016, Proceedings of the 6th IASTED International Conference on Modelling and Simulation, AfricaMS 2016. Acta Press, p. 293-300 8 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Modelling income poverty in the Geographic Targeting Geo-Information System
Akinyemi, F. O., 2005, Proceedings 2005 - The 8th AGILE International Conference on Geographic Information Science, AGILE 2005.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution