Find Research outputs

Search results

• Development of molecularly imprinted polymer based solid phase extraction sorbents for the selective clean-up of food and pharmaceutical residue samples

  Batlokwa, B. S., 2011

  Research output: Other contribution

  Open Access

• Development of MgAl₂O₄ grain refiner in Al in-situ composite through H₃BO₃ addition

  Chandramohan, P., Olubambi, P. A., Raghu, R. & Obadele, B. A., Nov 8 2019, In: IOP Conference Series: Materials Science and Engineering. 655, 1, 012039.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Development of Methods Acquiring Real Time Very High Resolution Agricultural Spatial Information Using Unmanned Aerial Vehicle

  Bolo, B., Mpoeleng, D. & Zlotnikova, I., 2019, In: Agris On-line Papers in Economics and Informatics. 11, 2, p. 21-29 9 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Development of low content phosphogypsum waste composites modified by lime-fly ash-basic oxygen furnace slag

  Mashifana, T. P., Okonta, F. N. & Ntuli, F., 2019, In: Revista Romana de Materiale/ Romanian Journal of Materials. 49, 2, p. 294-302 9 p.

  Research output: Contribution to journal › Article › peer-review

• Development of lightweight construction blocks by alkaline activation of bof slag

  Sithole, N. T., Okonta, F. & Ntuli, F., 2019, In: Journal of Solid Waste Technology and Management. 45, 2, p. 175-185 11 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Development of Jwaneng Mine: Economic Impacts and Environmental Implications

  Totolo, O., Gwebu, T. D., Darkoh, M. B. K. & Ntsabane, I. P., 2010, In: Botswana Journal of African Studies . 24, 2, p. 17-37

  Research output: Contribution to journal › Article › peer-review

• Development of ICT Competence of Students at the University of Education, «Pedagogical Informatics» (Moscow, Russia)

  Zlotnikova, I., 2004, In: State Press Committee of Russian Federation. p. 3-12

  Research output: Contribution to journal › Article › peer-review

• Development of efficient image quarrying technique for Mammographic image classification to detect breast cancer with supervised learning algorithm

  Antony, S. J. S. & Ravi, S., Jan 1 2014, ICACCS 2013 - Proceedings of the 2013 International Conference on Advanced Computing and Communication Systems: Bringing to the Table, Futuristic Technologies from Around the Globe. Institute of Electrical and Electronics Engineers Inc., 6938688

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Development of composite proton exchange membrane from polystyrene butadiene rubber and carbon nanoballs for fuel cell application

  Abdulkareem, A. S., Afolabi, A. S., Idibie, C. A., Iyuke, S. E. & Pienaar, H. C. VZ., Mar 22 2012, In: Energy Procedia. 14, p. 2026-2037 12 p.

  Research output: Contribution to journal › Conference article › peer-review
  3 Citations (Scopus)

• Development of better quality low-cost activated carbon from South African Pine tree (Pinus patula) sawdust: characterization and comparative phenol adsorption

  Lloyd, M., Onyango, M. S., Ochieng, A. & Kasaini, H., 2013, In: International Journal of Chemical and Molecular Engineering. 7, 7, p. 546-556 11 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Development of available transfer capability enhancement using intelligent genetic algorithm for IEEE bus system

  Rohini, R., Rao, D. N., Ravi, S. & Sampath Kumar, V., Sep 2019, In: Intelligent Automation and Soft Computing. 25, 3, p. 433-440 8 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Development of a styrene based molecularly imprinted polymer and its molecular recognition properties of vanadyl tetraphenylporphyrin in organic media

  Awokoya, K. N., Batlokwa, B. S., Moronkola, B. A., Chigome, S., Ondigo, D. A., Tshentu, Z. & Torto, N., Jan 22 2013, In: International Journal of Polymeric Materials and Polymeric Biomaterials. 63, 2, p. 107-113 7 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Development of a real-time capacitive biosensor for cyclic cyanotoxic peptides based on Adda-specific antibodies

  Lebogang, L., Hedström, M. & Mattiasson, B., Jan 1 2014, In: Analytica Chimica Acta. 826, 1, p. 69-76 8 p.

  Research output: Contribution to journal › Article › peer-review
  17 Citations (Scopus)

• Development of an efficient and secure mobile communication system with new future directions

  Yahya, A., Ghani, F., Badlishah Ahmad, R., Rahman, M., Syuhada, A., Sidek, O. & Salleh, M. F. M., Dec 1 2011, Handbook of Research on Computational Science and Engineering: Theory and Practice. IGI Global, p. 219-238 20 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter
  4 Citations (Scopus)

• Development of an Anti-collision Model for vehicles

  Zungeru, A. M., 2012, In: International Journal of Embedded Systems and Applications (IJESA). 2, 4, p. 21-34

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Development of an aflatoxin B1 specific molecularly imprinted solid phase extraction sorbent for the selective pre-concentration of toxic aflatoxin B1 from child weaning food, Tsabana

  Semong, O. & Batlokwa, B. S., 2017, In: Molecular Imprinting. 5, 1, p. 1-15 15 p.

  Research output: Contribution to journal › Article › peer-review

• Development of a high data-throughput ADC board for the PROMETEO portable test-bench for the upgraded front-end electronics of the ATLAS TileCal

  Spoor, M., Kureba, O. & Sandrock, C., Oct 15 2015, In: Journal of Physics: Conference Series. 645, 1, 012027.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Development of a Dual Sensor Heat Control System

  Zungeru, A. M. & Ahmed, M. S., 2012, In: International Journal of Instrumentation and Control Systems (IJICS). 2, 4, p. 11-26 17 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Development of adsorbent from banana peel for wastewater treatment

  Abdulfatai, J., Saka, A. A., Afolabi, A. S. & Micheal, O., 2013, Mechanical Materials and Manufacturing Engineering II. Vol. 248. p. 310-315 6 p. (Applied Mechanics and Materials; vol. 248).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  12 Citations (Scopus)

• Development of a cysteine sensor based on the peroxidase-like activity of AgNPs@ Fe₃O₄ core-shell nanostructures

  Mazhani, M., Alula, M. T. & Murape, D., Apr 22 2020, In: Analytica Chimica Acta. 1107, p. 193-202 10 p.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)

• Development and size distribution of polystyrene/ZnO nanofillers

  Ayeleru, O. O., Dlova, S., Ntuli, F., Kupolati, W. K. & Olubambi, P. A., 2019, In: Procedia Manufacturing. 30, p. 194-199 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  2 Citations (Scopus)

• Development and economic assessment of different WWTP control strategies for optimal simultaneous removal of carbon, nitrogen and phosphorus

  Ostace, G. S., Baeza, J. A., Guerrero, J., Guisasola, A., Cristea, V. M., Agachi, P. Ş. & Lafuente, J., Jun 1 2013, In: Computers and Chemical Engineering. 53, p. 164-177 14 p.

  Research output: Contribution to journal › Article › peer-review
  38 Citations (Scopus)

• Development and characterization of beverages from tigernut milk, pineapple and coconut fruit extracts

  Abdulfatai, J., Saka, A. A., Afolabi, A. S. & Diana, K., Jan 31 2013, Mechanical Materials and Manufacturing Engineering II. p. 304-309 6 p. (Applied Mechanics and Materials; vol. 248).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Development and application of the problem- oriented language FORTU for the design of non-standard mechanical constructions

  Mezhuyev, V., Lavrik, V. & Ravi, S., Jan 1 2015, In: Journal of the Serbian Society for Computational Mechanics. 9, 2, p. 1-9 9 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Developmental stage variation in Spodoptera frugiperda (Lepidoptera: Noctuidae) low temperature tolerance: implications for overwintering

  Keosentse, O., Mutamiswa, R., Du Plessis, H. & Nyamukondiwa, C., May 28 2021, In: Austral Entomology. 60, 2, p. 400-410 10 p.

  Research output: Contribution to journal › Article › peer-review

• Development, Kinetic Analysis and Applications of 2-D Nanostructured Layered Metal Hydroxides

  Majoni, S., 2011, In: Dissertations (2009 -).

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Development, calibration and evaluation of two mathematical models for pollutant transport in a small river

  Ani, E. C., Wallis, S., Kraslawski, A. & Agachi, P. S., Oct 1 2009, In: Environmental Modelling and Software. 24, 10, p. 1139-1152 14 p.

  Research output: Contribution to journal › Article › peer-review
  51 Citations (Scopus)

• Developing wireless network design in 4g long term evolution for healthcare

  Md Zain, A. S., Yahya, A., Malek, M. F. A. & Omar, N., Apr 30 2013, Handbook of Research on ICTs and Management Systems for Improving Efficiency in Healthcare and Social Care. IGI Global, Vol. 1-2. p. 503-517 15 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter
  1 Citation (Scopus)

• Developing the ground index (GI) for rock collapse assessment in tunneling

  Adoko, A. C., Wang, H., Jiao, Y. Y. & Seitshiro, I. T., Jan 1 2016, 50th US Rock Mechanics / Geomechanics Symposium 2016. American Rock Mechanics Association (ARMA), Vol. 1. p. 102-111 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• DEVELOPING RESEARCH COMPETENCIES FOR A COMPETITIVE EUROPE-CHALLENGES FOR HIGHER EDUCATION.

  Moraru, C. & Agachi, P. S., 2011, In: Management of Sustainable Development . p. 19-27 9 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Developing Electrolyte for a Soluble Lead Redox Flow Battery by Reprocessing Spent Lead Acid Battery Electrodes.

  Orapeleng, K., May 3 2017, In: Batteries. 3(2), 15

  Research output: Contribution to journal › Article › peer-review

• Developing countries must lead on solar geoengineering research

  Rahman, A. A., Artaxo, P., Asrat, A. & Parker, A., Apr 5 2018, In: Nature. 556, 7699, p. 22-24 3 p.

  Research output: Contribution to journal › Comment/debate › peer-review

  Open Access
  38 Citations (Scopus)

• Developing an empirical relationship for optimizing surface roughness of TiC thin film grown by magnetron sputtering using Taguchi analysis

  Abegunde, O., Akinlabi, E. & Oladijo, P., 2020, In: Materials Today: Proceedings. 26, Part 2, p. 3282-3287 6 p.

  Research output: Contribution to journal › Conference article › peer-review

• Developing a lean value chain for botswana’s grain milling industry – a case study of a wheat milling company

  Thaolang, L. & Gwangwava, N., 2020, Proceedings of the 2nd African International Conference on Industrial Engineering and Operations Management, 2020. IEOM Society, p. 1569-1579 11 p. (Proceedings of the International Conference on Industrial Engineering and Operations Management; vol. 59).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Deterministic solution approach for some classes of nonlinear multilevel programs with multiple followers

  Kassa, S. M. & Kassa, A. M., 2017, In: Journal of Global Optimization. 68, 4, p. 729-747

  Research output: Contribution to journal › Article › peer-review

  Open Access
  6 Citations (Scopus)

• Determining the PGM bearing mineral phase in the UG2 ore

  Danha, G., Bhondayi, C., Hlabangana, N. & Hildebrandt, D., Jun 15 2017, In: Powder Technology. 315, p. 236-242 7 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Determining the Pace and Magnitude of Lake Level Changes in Southern Ethiopia Over the Last 20,000 Years Using Lake Balance Modeling and SEBAL

  Fischer, M. L., Markowska, M., Bachofer, F., Foerster, V. E., Asrat, A., Zielhofer, C., Trauth, M. H. & Junginger, A., Jun 30 2020, In: Frontiers in Earth Science. 8, 197.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  12 Citations (Scopus)

• Determining real permittivity from fresnel coefficients in GNSS-R

  Savi, P., Bertoldo, S. & Milani, A., 2019, In: Progress In Electromagnetics Research M. 79, p. 159-166 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  1 Citation (Scopus)

• Determining Optimal Blocking Sizes for Large Exam Groups When Data Matching

  Anderson, G., Masizana-Katongo, A. & Mpoeleng, D., 2014, In: International Journal on Information Technology . 2, 3, p. 80-86 7 p.

  Research output: Contribution to journal › Article › peer-review

• Determining an optimal interstitial filling condition: An Attainable Region approach

  Hlabangana, N., Danha, G., Mguni, N. G., Madiba, M. S. & Bhondayi, C., 2018, In: Powder Technology. 327, p. 9-16 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  6 Citations (Scopus)

• Determination of the Most Effective Concentration of Deet and Permethrin in A Mosquito Repellent Soap and Assay of the Active Ingredients

  Mtisi, F., Parekh, C. T., Ochieng, A. & Chiririwa, H., 2016, In: International Journal of Applied Chemistry. 12, 2, p. 95-105 11 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Determination of the least impactful municipal solid waste management option in Harare, Zimbabwe

  Nhubu, T. & Muzenda, E., Nov 1 2019, In: Processes. 7, 11, 22 p., 785.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  4 Citations (Scopus)

• Determination of the cutting resistance model of soil

  Szymanski, J. K., Balideh, S., Suglo, R. S. & Planeta, S., Nov 2011, In: International Journal of Mining and Mineral Engineering. 3, 3, p. 220-232 13 p.

  Research output: Contribution to journal › Article › peer-review

• Determination of surface stoichiometry in polycrystalline alloys by a crystallographic electron attenuation model: Application to the Ce/Rh system

  Andersen, J. E. T., Warren, J. P., Zhang, X. & Lambert, R. M., Jan 1 1994, In: Surface and Interface Analysis. 21, 8, p. 576-580 5 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Determination of substrate and overlayer intensity ratios for metal-metal systems in AES and XPS by a crystallographic electron attenuation model

  Andersen, J. E. T., Feb 15 1992, In: Surface Science. 262, 3, p. 422-436 15 p.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)

• Determination of physical properties of isotropic porous materials by impedance tube

  Sharma, S. & Siginer, D., Dec 1 2009, Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009. PART B ed. Vol. 1. p. 1235-1237 3 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Determination of Optimum Slope Design for Northern Boxcut in Zone 5 Khoemacau Copper Mine, Botswana

  Gaopatwe, M., Kgopana, T., Verma, R. & Molebatsi, B., Feb 22 2021, In: Open Journal of Geology . 11, 2, p. 38-48 11 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

• Determination of iron by Z-GFAAS and the influence of short-term precision and long-term precision

  Andersen, J. E. T., Feb 1 2014, In: Central European Journal of Chemistry. 12, 2, p. 194-205 12 p.

  Research output: Contribution to journal › Article › peer-review
  8 Citations (Scopus)

• Determination of global absorptivity and emissivity of some opaque bulk materials using an integrating sphere calorimeter without ports

  Ochieng, R. M., Onyango, F. N. & Owino, A. J., Aug 1 2007, In: Measurement Science and Technology. 18, 8, p. 2667-2672 6 p., 043.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Determination of fluoride in vegetation: A review of modern techniques

  Cooke, J. A., Johnson, M. S. & Davison, A. W., Jan 1 1976, In: Environmental Pollution (1970). 11, 4, p. 257-268 12 p.

  Research output: Contribution to journal › Article › peer-review
  23 Citations (Scopus)