Find Research outputs

Search results

• Designing Effective Legends and Layouts with a Focus on Nigerian Topographic Maps

  Akinyemi, F. O., Kibora, P. M. & Aborishade, P., 2013, In: Cartographica. 48, 1, p. 1-12 12 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Designing a model of a full control module for a camless engine employing rotary valves

  Zibani, I., Chuma, J. & Marumo, R., Jan 1 2013, IEEE AFRICON 2013. Institute of Electrical and Electronics Engineers Inc., 6757724

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  5 Citations (Scopus)

• Design considerations for an engineered landfill

  Manyuchi, M. M., Mbohwa, C. & Muzenda, E., Dec 2017.

  Research output: Contribution to conference › Paper › peer-review

  Open Access

• Design and simulation of radio frequency based overheat alarm system

  Zungeru, A. M., Chuma, J., Mangwala, M. & Tito, P., Jan 1 2018, In: Journal of Engineering and Applied Sciences. 13, 21, p. 9022-9028 7 p.

  Research output: Contribution to journal › Article › peer-review

• Design and simulation of a weather activated window system

  Zungeru, A. M., Chuma, J., Mangwala, M. & Tlhabiwe, L. R., 2017, In: International Journal of Applied Engineering Research. 12, 20, p. 10189-10196 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  3 Citations (Scopus)

• Design and simulation of autonomous anti-rain construction site cover system

  Molatlhegi, M. P., Zungeru, A. M., Gaboitaolelwe, J. & Lebekwe, C., 2020, In: International Journal of Engineering Research and Technology. 13, 10, p. 3000-3007 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Design and simulation of an off-grid photovoltaic system with duty cycle prediction using neural network controller

  Zungeru, A. M., Duncan, D., Diarra, B., Chuma, J., Mosalaosi, M., Mtengi, B., Gaboitaolelwe, J. & Lebekwe, C., Nov 2021, In: International Journal of Engineering Research in Africa. 57, p. 181-210 30 p.

  Research output: Contribution to journal › Article › peer-review

• Design and simulation of an automatic room heater control system

  Zungeru, A. M., Mangwala, M., Chuma, J., Gaebolae, B. & Basutli, B., 2018, In: Heliyon. 4, 6

  Research output: Contribution to journal › Article › peer-review

  Open Access
  10 Citations (Scopus)

• Design and Simulation of an Automated Motion Sensing Sprinkler System

  Thema, M., Zungeru, A. M., Gaboitaolelwe, J., Mtengi, B. & Lebekwe, C. K., 2020, In: International Journal of Engineering Research and Technology. 13, 11, p. 3167-3177 11 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Design and Modelling of a Solar Water Heating System

  Kelechi, I. G., Zungeru, A. M., Ayobami, O. E., Habibu, H. & Olugbenga, A. F., 2014, In: Industrial Engineering Letters. 4, 12, p. 70-79 10 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Design and implementation of security in healthcare cloud computing

  Gorata, M., Zungeru, A. M., Mangwala, M. & Chuma, J., 2017, In: Journal of Computer Science. 13, 2, p. 34-47 14 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  1 Citation (Scopus)

• Design and implementation of Bridgeless Cuk Converter for controlled BLDC motor

  Ahmed, S. F., Iyswarya Annapoorani, K. & Ravi, S., Jan 1 2016, In: International Journal of Control Theory and Applications. 9, 2, p. 821-832 12 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Design and implementation of a short message service (SMS) based remote controller

  Zungeru, A. M., Edu, U. V. & Garba, A. J., 2012, In: Computer Engineering and Intelligent Systems . 3, 4, p. 106-118 14 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Design and implementation of an integrated software system for managing research activities in Universities

  Andreica, A. B. & Agachi, P. S., 2008, 7th RoEduNet International Conference, RoEduNet 2008. EDITURA U T PRESS

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  6 Citations (Scopus)

• Design and implementation of a microcontroller based buck boost converter as a smooth starter for permanent magnet motor

  Ravi, S., Mezhuyev, V., Iyswarya Annapoorani, K. & Sukumar, P., Jan 1 2016, In: Telkomnika (Telecommunication Computing Electronics and Control). 1, 3, p. 566-574 9 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Design and implementation of a microcontroller based buck boost converter as a smooth starter for permanent magnet motor

  Ravi, S., Mezhuyev, V., Iyswarya Annapoorani, K. & Sukumar, P., Mar 1 2016, In: Indonesian Journal of Electrical Engineering and Computer Science. 1, 3, p. 566-574 9 p.

  Research output: Contribution to journal › Article › peer-review
  10 Citations (Scopus)

• Design and implementation of a low cost digital bus passenger counter

  Zungeru, A. M., Deborah, M. K., Garba, A. J. & Tola, O. J., 2012, In: Innovative Systems Design and Engineering. 3, 4, p. 29-40 13 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Design and Implementation of a GSM Based Scrolling Message Display Board

  Zungeru, A. M., Obikoya, G. D. & Uche, O. F., 2014, In: International Journal of Computational Science, Information Technology and Control Engineering (IJCSITCE). 1, 3, p. 21-31 11 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Design and Implementation of a Generator Power Sensor and Shutdown Timer

  Obikoya, G. D., Zungeru, A. M., Mmonyi, A. C. & Hayatuddeen, T., 2014, In: Innovative Systems Design and Engineering. 5, 10, p. 1-6 6 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Design and Implementation of A Directional Object Sensing and Ranging System

  Zungeru, A. M., Mahmood, I., Mmonyi, A. C. & Obikoya, G. D., 2014, In: Network and Complex Systems. 4, 8, p. 1-12 12 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Design and development of microcontroller based selective harmonic elimination technique for three phase voltage source inverter

  Ravi, S., Rajpriya, G. & Kumarakrishnan, V., Jan 1 2015, In: International Journal of Applied Engineering Research. 10, 13, p. 11562-11578 17 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Design and development of maximum power point tracking in wind power optimization using fuzzy PLL controller

  Govindaraj, T., Ravi, S. & Balakrishnan, P. A., Aug 8 2013, 2013 IEEE International Conference on Emerging Trends in Computing, Communication and Nanotechnology, ICE-CCN 2013. p. 384-389 6 p. 6528528

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Design and development of MATLAB Simulink based Selective Harmonic Elimination technique for three phase voltage source inverter

  Rajpriya, G., Ravi, S. & Zaidi, A. M. A., Jan 1 2014, ICACCS 2013 - Proceedings of the 2013 International Conference on Advanced Computing and Communication Systems: Bringing to the Table, Futuristic Technologies from Around the Globe. Institute of Electrical and Electronics Engineers Inc., 6938734

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  10 Citations (Scopus)

• Design and development of MATLAB based three phase converter for unbalanced AC source with enhancement in power control

  Aiswarya, S., Ravi, S., Kumarakrishnan, V. & Mezhuyev, V., Oct 5 2015, Proceedings of the IEEE International Conference on Soft-Computing and Network Security, ICSNS 2015. Institute of Electrical and Electronics Engineers Inc., 7292376

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Design and Development of FPGA and FPAA Based Remote Terminal Units for Nuclear Power Plants

  Gour, A., Sanga, R., Behera, R. P., Sahoo, P., Murali, N. & Satyamurty, S., 2015, p. 44-48. 5 p.

  Research output: Contribution to conference › Paper › peer-review

  Open Access
  2 Citations (Scopus)

• Design and Development of a Sanitary Landfill for Low Income Countries for Optimal Waste Management

  Manyuchi, M. M., Muzenda, E. & Mbohwa, C., 2018, Handbook of Research on Microbial Tools for Environmental Waste Management. IGI Global, p. 373-388 16 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter (peer-reviewed) › peer-review

• Design and Development of an Ultrasonic Motion Detector

  Zungeru, A. M., 2013, In: International Journal of Security, Privacy and Trust Management (IJSPTM). 2, 1, p. 1-13 13 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Design and development of a microcontroller based neuro fuzzy temperature controller

  Ravi, S., Sudha, M. & Balakrishnan, P. A., Nov 26 2012, 2012 International Conference on Informatics, Electronics and Vision, ICIEV 2012. p. 103-107 5 p. 6317541

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Design and development of a hydrothermal reactor for bio coal production for application in solid waste management technologies

  Mugoronji, M., Manyuchi, M. M., Mbohwa, C., Muzenda, E., Stinner, W. & Sukdeo, N., Dec 14 2020, 2020 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2020. IEEE Computer Society, p. 556-561 6 p. 9309730. (IEEE International Conference on Industrial Engineering and Engineering Management; vol. 2020-December).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Design and Construction of a Remote Controlled Power Supply Unit

  Ahmed, M. S., Zungeru, A. M. & Kolo, J. G., 2007, In: Leonardo Journal of Sciences. 11, p. 41-50

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Design and Construction of an Automatic Triggered Bell Ringer Circuit

  Kelechi, I. G., Zungeru, A. M., Sandra, Y., Babarinde, A. K. & Oluwafemi, O. K., 2014, In: Innovative Systems Design and Engineering. 5, 12, p. 91-98 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Design and Analysis of Hip Joint DOFs for Lower Limb Robotic Exoskeleton

  Gwebu, Z., Moruti, K. & Jamisola, R. S., Nov 2019, 2019 IEEE 11th International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment, and Management, HNICEM 2019. Institute of Electrical and Electronics Engineers Inc., 6 p. 9073479. (2019 IEEE 11th International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment, and Management, HNICEM 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Design, test and implementation of a single piston rotary valve engine control unit

  Zibani, I. B., Chuma, J. M. & Marumo, J., Jan 1 2014, 19th IFAC World Congress IFAC 2014, Proceedings. Xia, X. & Boje, E. (eds.). IFAC Secretariat, Vol. 19. p. 5665-5670 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Design, environmental and sustainability constraints of new African observatories: The example of the Mozambique Radio Astronomy Observatory

  Barbosa, D., Bergano, M., Ribeiro, V. A. R. M., Loots, A., Thondikulam, V. L., Gaylard, M., Van Ardenne, A., Paulo, C., Colafrancesco, S., Amador, J. C., Maia, R. & Melo, R., Jan 1 2013, IEEE AFRICON 2013. Institute of Electrical and Electronics Engineers Inc., 6757829

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Desiccation and temperature resistance of the larger grain borer, Prostephanus truncatus (Horn) (Coleoptera: Bostrichidae): pedestals for invasion success?

  Mutamiswa, R., Machekano, H., Singano, C., Joseph, V., Chidawanyika, F. & Nyamukondiwa, C., Mar 1 2021, In: Physiological Entomology. 46, 2, p. 157-166 10 p.

  Research output: Contribution to journal › Article › peer-review

• Deposition of nanocrystalline diamond using a new film growth regime

  Ali, N., Titus, E., Fan, Q. H., Gracio, J., Jackson, M. J., Ahmed, W. & Ogwu, A. A., 2004, Surface Engineering - Proceedings of the 3rd International Surface Engineering Congress. Dahotre, N. B. & Popoola, O. O. (eds.). p. 230-239 10 p. (Surface Engineering - Proceedings of the 3rd International Surface Engineering Conference).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Deposition mechanism and microstructure of laser-assisted cold-sprayed (LACS) Al-12 wt.%Si coatings: Effects of laser power

  Olakanmi, E. O., Tlotleng, M., Meacock, C., Pityana, S. & Doyoyo, M., Jun 1 2013, In: JOM. 65, 6, p. 776-783 8 p.

  Research output: Contribution to journal › Article › peer-review
  17 Citations (Scopus)

• Deployment of IoV for Smart Cities: Applications, Architecture and Challenges

  Ang, L. M., Seng, K. P., Ijemaru, G. & Zungeru, A. M., Dec 17 2018, In: IEEE Access. 19 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  42 Citations (Scopus)

• Dependence of wear and corrosion properties on holding time of spark plasma sintered SAF 2205 reinforced with TiN nanoparticles

  Oke, S. R., Ige, O. O., Falodun, O. E., Obadele, B. A., Mphahlele, M. R. & Olubambi, P. A., Apr 17 2018, 2018 IEEE 9th International Conference on Mechanical and Intelligent Manufacturing Technologies, ICMIMT 2018. Institute of Electrical and Electronics Engineers Inc., p. 80-84 5 p. (2018 IEEE 9th International Conference on Mechanical and Intelligent Manufacturing Technologies, ICMIMT 2018; vol. 2018-January).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  5 Citations (Scopus)

• Dependence of structural and optoelectronic properties on thickness of γ-cui thin films deposited by vacuum thermal evaporation

  Dintle, L. K., Luhanga, P. V. C., Moditswe, C. & Muiva, C. M., 2018, In: MRS Advances. 3, 42-43, p. 2627-2642 16 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Dependence of fractal characteristics on the scan size of atomic force microscopy (AFM) phase imaging of aluminum thin films

  Mwema, F. M., Akinlabi, E. T. & Oladijo, O. P., 2020, In: Materials Today: Proceedings. 26, Part 2, p. 1540-1545 6 p.

  Research output: Contribution to journal › Conference article › peer-review
  2 Citations (Scopus)

• Density-dependent ecosystem service delivery under shifting temperatures by dung beetles

  Gotcha, N., Cuthbert, R. N., Machekano, H. & Nyamukondiwa, C., Sep 25 2021, In: Science of the Total Environment. 807, 1, 150575.

  Research output: Contribution to journal › Article › peer-review

• Densification mechanism and microstructural evolution in selective laser sintering of Al-12Si powders

  Olakanmi, E. O., Cochrane, R. F. & Dalgarno, K. W., Jan 1 2011, In: Journal of Materials Processing Technology. 211, 1, p. 113-121 9 p.

  Research output: Contribution to journal › Article › peer-review
  97 Citations (Scopus)

• Densification and tensile properties of titanium grade 4 produced using different routes

  Masikane, M. A., Johnson, O. T., Ogunmuyiwa, E. N. & Sigalas, I., 2019, In: Procedia Manufacturing. 35, p. 826-832 7 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  1 Citation (Scopus)

• Densification and microstructures of hybrid sintering of titanium alloy

  Ayodele, O. O., Awotunde, M. A., Shongwe, M. B., Obadele, B. A., Babalola, B. J. & Olubambi, P. A., Jan 2020, In: Materials Today: Proceedings. In press, 4 p.

  Research output: Contribution to journal › Article › peer-review

• Densification, microstructure and mechanical properties of spark plasma sintered Ni-17%Cr binary alloys

  Babalola, B. J., Shongwe, M. B., Obadele, B. A. & Olubambi, P. A., Apr 6 2019, In: International Journal of Advanced Manufacturing Technology. 101, 5-8, p. 1573-1581 9 p.

  Research output: Contribution to journal › Article › peer-review
  8 Citations (Scopus)

• Densification, hardness and tribological characteristics of MWCNTs reinforced Ti6Al4V compacts consolidated by spark plasma sintering

  Adegbenjo, A. O., Obadele, B. A. & Olubambi, P. A., Jun 15 2018, In: Journal of Alloys and Compounds. 749, p. 818-833 16 p.

  Research output: Contribution to journal › Article › peer-review
  25 Citations (Scopus)

• Demystifying the factors associated with rural–urban gaps in severe acute malnutrition among under-five children in low- and middle-income countries: a decomposition analysis

  Fagbamigbe, A. F., Kandala, N. B. & Uthman, A. O., Dec 1 2020, In: Scientific Reports. 10, 1, 15 p., 11172.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  4 Citations (Scopus)

• Demystifying Fractal Analysis of Thin Films: A Reference for Thin Film Deposition Processes

  Mwema, F. M., Akinlabi, E. T. & Oladijo, O. P., 2021, Trends in Mechanical and Biomedical Design - Select Proceedings of ICMechD 2019. Akinlabi, E. T., Ramkumar, P. & Selvaraj, M. (eds.). Springer Nature, Singapore, p. 213-222 10 p. (Lecture Notes in Mechanical Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Demand and Unmet Needs of Contraception Among Sexually Active In-Union Women in Nigeria: Distribution, Associated Characteristics, Barriers, and Program Implications

  Fagbamigbe, A. F., Afolabi, R. F. & Idemudia, E. S., Feb 1 2018, In: SAGE Open. 8, 1

  Research output: Contribution to journal › Article › peer-review

  Open Access
  13 Citations (Scopus)