Find Research outputs

Search results

• Determining the PGM bearing mineral phase in the UG2 ore

  Danha, G., Bhondayi, C., Hlabangana, N. & Hildebrandt, D., Jun 15 2017, In: Powder Technology. 315, p. 236-242 7 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Determining real permittivity from fresnel coefficients in GNSS-R

  Savi, P., Bertoldo, S. & Milani, A., 2019, In: Progress In Electromagnetics Research M. 79, p. 159-166 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  1 Citation (Scopus)

• Determining Optimal Blocking Sizes for Large Exam Groups When Data Matching

  Anderson, G., Masizana-Katongo, A. & Mpoeleng, D., 2014, In: International Journal on Information Technology . 2, 3, p. 80-86 7 p.

  Research output: Contribution to journal › Article › peer-review

• Determining an optimal interstitial filling condition: An Attainable Region approach

  Hlabangana, N., Danha, G., Mguni, N. G., Madiba, M. S. & Bhondayi, C., 2018, In: Powder Technology. 327, p. 9-16 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  6 Citations (Scopus)

• Determination of the Most Effective Concentration of Deet and Permethrin in A Mosquito Repellent Soap and Assay of the Active Ingredients

  Mtisi, F., Parekh, C. T., Ochieng, A. & Chiririwa, H., 2016, In: International Journal of Applied Chemistry. 12, 2, p. 95-105 11 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Determination of the least impactful municipal solid waste management option in Harare, Zimbabwe

  Nhubu, T. & Muzenda, E., Nov 1 2019, In: Processes. 7, 11, 22 p., 785.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  4 Citations (Scopus)

• Determination of the cutting resistance model of soil

  Szymanski, J. K., Balideh, S., Suglo, R. S. & Planeta, S., Nov 2011, In: International Journal of Mining and Mineral Engineering. 3, 3, p. 220-232 13 p.

  Research output: Contribution to journal › Article › peer-review

• Determination of surface stoichiometry in polycrystalline alloys by a crystallographic electron attenuation model: Application to the Ce/Rh system

  Andersen, J. E. T., Warren, J. P., Zhang, X. & Lambert, R. M., Jan 1 1994, In: Surface and Interface Analysis. 21, 8, p. 576-580 5 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Determination of substrate and overlayer intensity ratios for metal-metal systems in AES and XPS by a crystallographic electron attenuation model

  Andersen, J. E. T., Feb 15 1992, In: Surface Science. 262, 3, p. 422-436 15 p.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)

• Determination of physical properties of isotropic porous materials by impedance tube

  Sharma, S. & Siginer, D., Dec 1 2009, Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009. PART B ed. Vol. 1. p. 1235-1237 3 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Determination of Optimum Slope Design for Northern Boxcut in Zone 5 Khoemacau Copper Mine, Botswana

  Gaopatwe, M., Kgopana, T., Verma, R. & Molebatsi, B., Feb 22 2021, In: Open Journal of Geology . 11, 2, p. 38-48 11 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Determination of iron by Z-GFAAS and the influence of short-term precision and long-term precision

  Andersen, J. E. T., Feb 1 2014, In: Central European Journal of Chemistry. 12, 2, p. 194-205 12 p.

  Research output: Contribution to journal › Article › peer-review
  8 Citations (Scopus)

• Determination of global absorptivity and emissivity of some opaque bulk materials using an integrating sphere calorimeter without ports

  Ochieng, R. M., Onyango, F. N. & Owino, A. J., Aug 1 2007, In: Measurement Science and Technology. 18, 8, p. 2667-2672 6 p., 043.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Determination of fluoride in vegetation: A review of modern techniques

  Cooke, J. A., Johnson, M. S. & Davison, A. W., Jan 1 1976, In: Environmental Pollution (1970). 11, 4, p. 257-268 12 p.

  Research output: Contribution to journal › Article › peer-review
  23 Citations (Scopus)

• Determination of Critical Paths for Multipath Propagation in Broadband Powerline Communication Networks

  Mosalaosi, M. & Afullo, T. J. O., Dec 31 2018, 2018 Progress In Electromagnetics Research Symposium, PIERS-Toyama 2018 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 956-961 6 p. 8597785. (Progress in Electromagnetics Research Symposium; vol. 2018-August).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Determination of Chemical Homogeneity of Fire Retardant Polymeric Nanocomposite Materials by Near-Infrared Multispectral Imaging Microscopy

  Duri, S., Majoni, S., Hossenlopp, J. M. & Tran, C. D., Jul 6 2010, In: Analytical Letters. 43, 10-11, p. 1780-1789 10 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  7 Citations (Scopus)

• Determinants of livestock farmers’ perception of future droughts and adoption of mitigating plans

  Rakgase, M. A. & Norris, D., May 18 2015, In: International Journal of Climate Change Strategies and Management. 7, 2, p. 191-205 15 p.

  Research output: Contribution to journal › Article › peer-review
  8 Citations (Scopus)

• Determinants of households’ residential districts’ preferences within metropolitan city of Ibadan, Nigeria

  Lekan, S. & Akinyemi, F. O., 2009, In: Journal of Human Ecology. 25, 2, p. 137-141

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Determinants of audit fees: Evidence from Compustat database from 2009-2019

  Malele, V., Letsoalo, M. E. & Mafu, M., 2021, Proceedings of 2021 IEEE 24th International Conference on Information Fusion, FUSION 2021. Institute of Electrical and Electronics Engineers Inc., (Proceedings of 2021 IEEE 24th International Conference on Information Fusion, FUSION 2021).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Detection of masses in digital mammograms using K-means and neural network

  Julian Savari Antony, S. & Ravi, S., Jan 1 2015, In: International Journal of Applied Engineering Research. 10, 7, p. 17643-17656 14 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Detection of Enteric Viruses from Wastewater and River Water in Botswana

  Tubatsi, G. & Kebaabetswe, L. P., Feb 12 2022, In: Food and Environmental Virology.

  Research output: Contribution to journal › Article › peer-review

• Detection of changes in rainfall and runoff patterns

  Lungu, E. M., Jun 15 1993, In: Journal of Hydrology. 147, 1-4, p. 153-167 15 p.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)

• Detection and molecular characterisation of group A rotavirus from children in northern Botswana

  Kebaabetswe, L. P., Sebunya, T. K., Matsheka, M. I. & Ndung'u, T., Apr 2005, In: East African Medical Journal. 82, 4, p. 203-208 6 p.

  Research output: Contribution to journal › Article › peer-review
  11 Citations (Scopus)

• Detection and avoidance of routing attack in mobile ad-hoc network using intelligent node

  Selvaraj, R., Marwala, T., Kuthadi, V. M. & Ranjan, A., 2013.

  Research output: Contribution to conference › Paper › peer-review

• Detailed mathematical model for pollutants transport in a natural stream

  Ani, E. C., Wallis, S., Kraslawski, A. & Agachi, S. P., Jun 26 2009, 19th European Symposium on Computer Aided Process Engineering. Jezowski, J. & Thullie, J. (eds.). p. 731-736 6 p. (Computer Aided Chemical Engineering; vol. 26).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter
  2 Citations (Scopus)

• Detailed assessment of platinum-group minerals associated with chromitite stringers in the merensky reef of the eastern bushveld complex, South Africa

  Rose, D., Viljoen, F., Knoper, M. & Rajesh, H., Dec 1 2011, In: Canadian Mineralogist. 49, 6, p. 1385-1396 12 p.

  Research output: Contribution to journal › Article › peer-review
  13 Citations (Scopus)

• Desilication of fly ash and development of lightweight construction blocks from alkaline activated desilicated fly ash

  Falayi, T., Okonta, F. N. & Ntuli, F., 2017, In: International Journal of Environment and Waste Management. 20, 3, p. 233-253 21 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  7 Citations (Scopus)

• Desilication of calcined pulverised fly ash and use of silicate solution to prepare a mesoporous silica adsorbent for heavy metals in acid mine drainage

  Falayi, T., Ntuli, F. & Okonta, F. N., 2019, In: International Journal of Environmental Technology and Management. 22, 2-3, p. 155-176 22 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Design Optimization of Wingtip Devices to Reduce Induced Drag on Fixed-Wings

  Makgantai, B., Subaschandar, N. & Jamisola, R. S., Jun 15 2021, 2021 International Conference on Unmanned Aircraft Systems, ICUAS 2021. Institute of Electrical and Electronics Engineers Inc., p. 1459-1465 7 p. 9476801. (2021 International Conference on Unmanned Aircraft Systems, ICUAS 2021).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Design of Synthetic Optimizing Neuro Fuzzy Temperature Controller for Twin Screw Profile Plastic Extruder Using Labview

  Ravi, S., Balakrishnan, P. A., Marimuthu, C. N. & Sujitha, C., Jan 1 2014, In: Intelligent Automation and Soft Computing. 20, 1, p. 92-100 9 p.

  Research output: Contribution to journal › Article › peer-review
  9 Citations (Scopus)

• Design of synthetic optimizing neuro fuzzy temperature controller for dual screw profile plastic extruder using labview

  Samikannu, R. & Poonamallie, B. A., 2011, In: Journal of Computer Science. 7, 5, p. 671-677 7 p.

  Research output: Contribution to journal › Article › peer-review
  10 Citations (Scopus)

• Design of Photovoltaic System for IoT Devices

  Murtala Zungeru, A., Chuma, J. M., Lebekwe, C. K., Phalaagae, P., Gaboitaolelwe, J., Murtala Zungeru, A., Chuma, J. M., Duncan, D., Diarra, B., Mosalaosi, M., Mtengi, B. & Gaboitaolelwe, J., 2020, Green Internet of Things Sensor Networks. Springer International Publishing AG, p. 55-81 27 p. (Green Internet of Things Sensor Networks).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

• Design of optimal 2-d nongrid sparse arrays for medical ultrasound

  Diarra, B., Robini, M., Tortoli, P., Cachard, C. & Liebgott, H., Nov 4 2013, In: IEEE Transactions on Biomedical Engineering. 60, 11, p. 3093-3102 10 p., 6529099.

  Research output: Contribution to journal › Article › peer-review
  66 Citations (Scopus)

• Design of locomotive location indicator communication system

  Oranye, N., Masupe, S., Chuma, J. M. & Sebusang, S. E. M., 2004, 2004 IEEE AFRICON: 7th AFRICON Conference in Africa: Technology Innovation. Vol. 2. p. 1269-1273 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Design of intelligent self-tuning GA ANFIS temperature controller for plastic extrusion system

  Ravi, S., Sudha, M. & Balakrishnan, P. A., Nov 24 2011, In: Modelling and Simulation in Engineering. 2011, 101437.

  Research output: Contribution to journal › Article › peer-review
  41 Citations (Scopus)

• Design of Integrated Gasification Combined Cycle plant with Carbon Capture and Storage based on co-gasification of coal and biomass

  Maxim, V., Cormos, C. C. & Agachi, P. S., Jun 20 2011, In: Computer Aided Chemical Engineering. 29, p. 1904-1908 5 p.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)

• Design of cloud-based CAPP system to aid process planning for sheet metal products

  Gwangwava, N., 2018, E-Manufacturing and E-Service Strategies in Contemporary Organizations. January ed. IGI Global, p. 242-269 28 p. (Advances in E-Business Research Series; no. January).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

• Design of a Smart Embedded Uninterrupted Power Supply System for Personal Computer

  Zungeru, A. M., Garba, A. J., Kolo, J. G., Ahmed, M. S. & Olumide, I., 2012, In: International Journal of Embedded Systems and Applications (IJESA). 2, 4, p. 1-19 19 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Design of a short range optical pulse transceiver system for intruder detection

  Basutli, B., Zungeru, A. M., Mtengi, B. & Diarra, B., Sep 25 2019, Proceedings of 2019 2nd International Conference on Electronics and Electrical Engineering Technology, EEET 2019 - Workshop 2019 3rd International Conference on Biomedical Engineering and Bioinformatics, ICBEB 2019. Association for Computing Machinery, p. 68-73 6 p. (ACM International Conference Proceeding Series).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Design of a photovoltaic system with ultracapacitor energy buffer

  Diarra, B., Zungeru, A. M., Ravi, S., Chuma, J., Basutli, B. & Zibani, I., Jan 1 2019, In: Procedia Manufacturing. 33, p. 216-223 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  3 Citations (Scopus)

• Design of a new front-end electronics test-bench for the upgraded ATLAS detector's Tile Calorimeter

  Kureba, C. O., Govender, M., Hofsajer, I., Ruan, X., Sandrock, C. & Spoor, M., Oct 15 2015, In: Journal of Physics: Conference Series. 645, 1, 012020.

  Research output: Contribution to journal › Conference article › peer-review
  1 Citation (Scopus)

• Design of an enhanced hit the target game

  Mtengi, B., Zungeru, A. M., Bakary, D. & Chuma, J., Sep 25 2019, Proceedings of 2019 2nd International Conference on Electronics and Electrical Engineering Technology, EEET 2019 - Workshop 2019 3rd International Conference on Biomedical Engineering and Bioinformatics, ICBEB 2019. Association for Computing Machinery, p. 37-41 5 p. (ACM International Conference Proceeding Series).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Design of an elliptic function bandpass filter using a high dielectric ring resonator

  Chuma, J. M., Mar 2005, In: SAIEE Africa Research Journal. 96, 2, p. 117-120 4 p.

  Research output: Contribution to journal › Article › peer-review

• Design of an educational electronic game system

  Mtengi, B., Zungeru, A. M., Maphane, P. & Chuma, J., Sep 25 2019, Proceedings of 2019 2nd International Conference on Electronics and Electrical Engineering Technology, EEET 2019 - Workshop 2019 3rd International Conference on Biomedical Engineering and Bioinformatics, ICBEB 2019. Association for Computing Machinery, p. 1-6 6 p. (ACM International Conference Proceeding Series).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Design of a GSM-Based Biometric Access Control System

  Habibu, H., Zungeru, A. M., Susan, A. A., Kelechi, I. G. & Oluwatosin, O. B., 2014, In: Control Theory and Informatics. 4, 8, p. 1-20 20 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Design of a Biodigester to Treat Cow Dung in Botswana

  Valela, I. & Muzenda, E., Nov 2019, Proceedings of 2019 7th International Renewable and Sustainable Energy Conference, IRSEC 2019. El Hibaoui, A., Essaaidi, M. & Zaz, Y. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 1-5 5 p. 9078244. (Proceedings of 2019 7th International Renewable and Sustainable Energy Conference, IRSEC 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Design of a 30 nm Germanium FinFET by Parameter Optimization

  Mogosetso, G., Lebekwe, C. K. & Ditshego, N., Jan 17 2022, In: Advanced Engineering Forum. 44, p. 105-118 14 p.

  Research output: Contribution to journal › Article › peer-review

• Designing of sampling programmes for industrial effluent monitoring

  Ntuli, F., Kuipa, P. K. & Muzenda, E., Jan 1 2011, In: Environmental Science and Pollution Research. 18, 3, p. 479-484 6 p.

  Research output: Contribution to journal › Article › peer-review
  9 Citations (Scopus)

• Designing Layered Double Hydroxides for Targeted Applications: Supplemental Proceedings

  Hossenlopp, J. M., Majoni, S. & Machingauta, C., 2012, Designing Layered Double Hydroxides for Targeted Applications: Supplemental Proceedings. Wiley-Blackwell, p. 403-412 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

• Designing Innovation Ecosystems from Scratch: What is your Ecosystem Role?

  Nthubu, B., Cruickshank, L. & Richards, D., Aug 13 2020.

  Research output: Contribution to conference › Abstract › peer-review

  Open Access