Find Research Outputs

Search results

• 2013

  11 - Xanthones and Anthranoids from the Medicinal Plants of Africa

  Mazimba, O., Nana, F., Kuete, V. & Singh, G. S., 2013, Medicinal Plant Research in Africa. Kuete, V. (ed.). Oxford: Elsevier, p. 393-434 42 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Xanthones
  • Anthraquinones
  • Bioactivity
  • Anthracenes
  • Biosynthetic Pathways
  6 Citations (Scopus)
• 2012

  Designing Layered Double Hydroxides for Targeted Applications: Supplemental Proceedings

  Hossenlopp, J. M., Majoni, S. & Machingauta, C., 2012, Designing Layered Double Hydroxides for Targeted Applications: Supplemental Proceedings. Wiley-Blackwell, p. 403-412 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter
• 2016

  Application of Non-Target Analysis with LC-HRMS for the Monitoring of Raw and Potable Water: Strategy and Results: Assessing Transformation Products of Chemicals by Non-Target and Suspect Screening − Strategies and Workflows Volume 2

  Bader, T., Schulz, W., Lucke, T., Seitz, W. & Winzenbacher, R., 2016, Application of Non-Target Analysis with LC-HRMS for the Monitoring of Raw and Potable Water: Strategy and Results. American Chemical Society, Vol. 1242. p. 49-70 22 p. (ACS Symposium Series; vol. 1242).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • raw water
  • liquid chromatography
  • screening
  • mass spectrometry
  • waste water treatment plant
  5 Citations (Scopus)
• 2010

  Solar-driven desiccant and evaporative cooling: Technology overview and operational experiences: Series on Energy and Power Systems

  Bader, T., Trinkl, C., Zörner, W. & Hanby, V., 2010, p. 1-8. 8 p.

  Research output: Contribution to conference › Paper › peer-review
  1 Citation (Scopus)
• 2016

  Utilization of organic fraction of municipal solid waste (OFMSW) as compost: A case study Of Florida, South Africa

  Ayeleru, O. O., Ntuli, F. & Mbohwa, C., 2016, p. 580-585. 6 p.

  Research output: Contribution to conference › Paper › peer-review

  • compost
  • municipal solid waste
  • landfill
  • Africa
  • waste management
• 2011

  Interaction of pacemakers as generating mechanism of atrial fibrillation

  Lenk, C., Einax, M., Seemann, G. & Maass, P., 2011, p. 229-232. 4 p.

  Research output: Contribution to conference › Paper › peer-review

  1 Citation (Scopus)
• 2012

  Optimized 2D array design for Ultrasound imaging

  Diarra, B., Liebgott, H., Robini, M., Tortoli, P. & Cachard, C., 2012, Proceedings of the 20th European Signal Processing Conference, EUSIPCO 2012. p. 2718-2722 5 p. 6333799

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Ultrasonics
  • Imaging techniques
  • Biopsy
  • Simulated annealing
  • Experiments
  6 Citations (Scopus)
• 2015

  A deterministic channel model for multi-access broadband powerline communication

  Mosalaosi, M. & Afullo, T. J. O., Nov 18 2015, Proceeding of the 2015 12th IEEE AFRICON International Conference: Green Innovation for African Renaissance. Institute of Electrical and Electronics Engineers Inc., 7331993. (IEEE AFRICON Conference; vol. 2015-November).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Communication
  • Electric lines
  • Electromagnetic wave propagation
  • Resonant circuits
  • Transfer functions
  4 Citations (Scopus)
• 2014

  Broadband analysis and characterization of noise for in-door power-line communication channels

  Mosalaosi, M. & Afullo, T. J. O., 2014, Progress in Electromagnetics Research Symposium. Electromagnetics Academy, p. 719-723 5 p. (Progress in Electromagnetics Research Symposium).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Impulse noise
  • Power spectral density
  • Communication
  • Orthogonal frequency division multiplexing
  • Statistical methods
  2 Citations (Scopus)
• 2016

  An External Replication on the Effects of Test-driven Development Using a Multi-site Blind Analysis Approach

  Fucci, D., Scanniello, G., Romano, S., Shepperd, M., Sigweni, B., Uyaguari, F., Turhan, B., Juristo, N. & Oivo, M., Sep 8 2016, 10th ACM/IEEE International Symposium on Empirical Software Engineering and Measurement, ESEM 2016. IEEE Computer Society, Vol. 08-09-September-2016. a3

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Productivity
  • Experiments
  • Students
  • Testing
  • Costs
  16 Citations (Scopus)
• 2015

  Conductor disc used to suppress spurious mode and enhance electric coupling in a dielectric loaded combline resonator

  Pholele, T. M. & Chuma, J. M., Nov 9 2015, 2015 IEEE Radio and Antenna Days of the Indian Ocean, RADIO 2015. Institute of Electrical and Electronics Engineers Inc., 7323396

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Magnetic couplings
  • Studios
  • Software packages
  • Resonators
  • Microwaves
• 2009

  Sensitivity study of a heat integrated FCC plant

  Morar, M. & Agachi, P. S., Jun 26 2009, 19th European Symposium on Computer Aided Process Engineering. Jezowski, J. & Thullie, J. (eds.). p. 465-470 6 p. (Computer Aided Chemical Engineering; vol. 26).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Fluid catalytic cracking
  • Hot Temperature
  • Heat exchangers
  • Sensitivity analysis
  • Energy utilization
  2 Citations (Scopus)

• Row division method to generate QC-LDPC codes

  Yahya, A., Sidek, O., Salleh, M. F. M. & Ghani, F., Oct 13 2009, Proceedings of the 2009 5th Advanced International Conference on Telecommunications, AICT 2009. p. 183-187 5 p. 5072428

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Jamming
  • Forward error correction
  • hardware
  • Group
  • Computer hardware
  3 Citations (Scopus)
• 2008

  Sintering and heat-treatment of injection moulded 440K-type martensitic stainless steel compacts

  Yousaf Anwar, M., Bhero, S., Messer, P. F. & Davies, H. A., 2008, Proceedings of the Euro International Powder Metallurgy Congress and Exhibition, Euro PM 2008. European Powder Metallurgy Association (EPMA), Vol. 2. p. 215-220 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • martensitic stainless steels
  • Martensitic stainless steel
  • Sintering
  • Heat treatment
  • heat treatment
• 2014

  Optimization of free-moving elements in 2D ultrasound sparse arrays

  Diarra, B., Robini, M., Roux, E., Liebgott, H., Cachard, C. & Tortoli, P., Jan 1 2014, IEEE International Ultrasonics Symposium, IUS. IEEE Computer Society, p. 2189-2192 4 p. 6931734

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • optimization
  • apodization
  • simulated annealing
  • footprints
  • sampling
  1 Citation (Scopus)
• 2012

  Raman spectroscopy and X-ray diffraction analysis of the structural characteristics of fluidized bed gasification fly ash

  Kelebopile, L., Sun, R., Zhang, X. & Xu, P., Jan 1 2012, Cleaner Combustion and Sustainable World - Proceedings of the 7th International Symposium on Coal Combustion. Springer-Verlag Berlin Heidelberg, p. 447-452 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Raman spectroscopy
  • X ray diffraction analysis
  • Fly ash
  • Fluidized beds
  • Gasification
  1 Citation (Scopus)
• 1986

  SOLAR DRYING OF YAM-FLOUR PELLETS.

  Oladiran, M. T., 1986, In: American Society of Mechanical Engineers (Paper).

  Research output: Contribution to journal › Article › peer-review

  • Drying
  • Nozzles
  • Heat transfer coefficients
  • Mass transfer
  • Sublimation
• 2012

  Association of alcohol consumption with HIV/AIDS: A mathematical modelling approach

  Thomas, G. & Lungu, E. M., Dec 1 2012, A Treatise of Biological Models. Nova Science Publishers, Inc., p. 179-215 37 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Alcohol
  • Progression
  • Susceptibility
  • Africa
  • HIV Infection
• 2011

  Microstructure and wear behaviour of Al/TiB 2 metal matrix composite

  Popoola, A. P., Pityana, S. & Ogunmuyiwa, E., 2011, Laser and Plasma Applications in Materials Science, LAPAMS 2010. Vol. 227. p. 23-26 4 p. (Advanced Materials Research; vol. 227).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Wear resistance
  • Wear of materials
  • Microstructure
  • Microhardness
  • Metals
  10 Citations (Scopus)
• 2013

  Low complexity burst allocation algorithm with high frame utilization for Mobile WiMAX (802.16e)

  Ali, Z. G., Ahmad, R. B., Yahya, A., Hassnawi, L. A. & Aldhaibani, J. A., Sep 2 2013, BEIAC 2013 - 2013 IEEE Business Engineering and Industrial Applications Colloquium. p. 404-409 6 p. 6560158

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)
• 2015

  Biohydrogen production by bacterial granules adapted to grow at different thermophilic temperatures

  Obazu, F. O., Afolabi, A. S., Daramola, M. O. & Gray, V. M., Jan 1 2015, WCE 2015 - World Congress on Engineering 2015. Ao, S. I., Gelman, L., Gelman, L., Hukins, D. W. L., Hunter, A., Korsunsky, A. M., Ao, S. I. & Ao, S. I. (eds.). Newswood Limited, Vol. 2218. p. 924-928 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Sugar (sucrose)
  • Bioreactors
  • Temperature
  • Glucose
• 2005

  Extraction of buildings in informal settlement areas from high-resolution data

  Mayunga, S. D., Zhang, Y. & Coleman, D. J., 2005, American Society for Photogrammetry and Remote Sensing - Annual Conference 2005 - Geospatial Goes Global: From Your Neighborhood to the Whole Planet. Vol. 2. p. 691-702 12 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Photogrammetry
  • Urban planning
  • Geographic information systems
  • Computer vision
  • Casting
• 2014

  Microstructure and dry sliding wear property of laser clad Ti-6Al-4V under different counterface materials

  Obadele, B. A., Olubambi, P. A. & Pityana, S., Jan 1 2014, AMI Light Metals Conference 2014. Curle, U. A. & Möller, H. (eds.). Trans Tech Publications Ltd, p. 259-265 7 p. (Advanced Materials Research; vol. 1019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Lasers
  • Wear of materials
  • Microstructure
  • Brass
  • Scanning electron microscopy
  2 Citations (Scopus)
• 2012

  Microstructure and corrosion behaviour of TiC reinforced duplex stainless steels matrix composites sythesized by laser melt injection

  Obadele, B., Olubambi, P. & Johnson, O., May 15 2012, Extraction and Processing Division - 2012 EPD Congress - Held During the TMS 2012 Annual Meeting and Exhibition. p. 33-40 8 p. (TMS Annual Meeting).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • titanium carbide
  • Titanium carbide
  • titanium carbides
  • Duplex stainless steel
  • corrosion
• 2005

  The control of foot-and-mouth disease in Botswana: Special reference to vaccination

  Letshwenyo, M., Fanikiso, M. & Chimbombi, M., 2005, Control of Infectious Animal Diseases by Vaccination. Schudel, A. & Lombard, M. (eds.). p. 403-413 11 p. (Developments in Biologicals; vol. 119).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Botswana
  • Foot-and-Mouth Disease
  • Vaccination
  • Disease control
  • Vaccines
  4 Citations (Scopus)
• 2020

  Heat and mass transfer effect on an unsteady MHD radiative chemically reactive Casson fluid over a stretching sheet in porous medium

  Das, M., Mahanta, G. & Shaw, S., Jun 24 2020, In: Heat Transfer. 49, 8, p. 4350-4369 20 p.

  Research output: Contribution to journal › Article › peer-review

  • Magnetohydrodynamics
  • Stretching
  • Porous materials
  • magnetohydrodynamics
  • mass transfer
  1 Citation (Scopus)
• 2009

  Evaluation of energy vectors poly-generation schemes based on solid fuel gasification processes with Carbon Capture and Storage (CCS)

  Cormos, C. C., Cormos, A. M., Goia, V. & Agachi, S., Jun 29 2009, 19th European Symposium on Computer Aided Process Engineering. Jezowski, J. & Thullie, J. (eds.). p. 1275-1280 6 p. (Computer Aided Chemical Engineering; vol. 26).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Carbon capture
  • Hydrogen
  • Gasification
  • Carbon Dioxide
  • Carbon dioxide
  1 Citation (Scopus)
• 2013

  Evaluation of natural flocculants for conventional water treatment

  Afolabi, A. S., Sigwadi, R., Abdulkareem, A. S. & Mateescu, C. M., Jan 31 2013, Mechanical Materials and Manufacturing Engineering II. p. 298-303 6 p. (Applied Mechanics and Materials; vol. 248).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Water treatment
  • Polyelectrolytes
  • Seed
  • Water
  • Aluminum sulfate
• 2012

  A treatise of biological models

  Nyabadza, F., Kgosimore, M. & Lungu, E. M., Dec 1 2012, Nova Science Publishers, Inc. 238 p.

  Research output: Book/Report › Book

  • Biological Models
  • Social Dynamics
  • Resource Management
  • Population Dynamics
  • Trends
  2 Citations (Scopus)
• 2014

  NaBH4-mediated complete reduction of the α,β-unsaturated ketone units of chalcones in the synthesis of flavans

  Masesane, I. B. & Mazimba, O., Jan 1 2014, Chemistry: The Key to our Sustainable Future. Springer Netherlands, p. 229-235 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • ketone
  • carbon
  • alcohol
  • acid
• 2020

  Convergence results of forward–backward method for a zero of the sum of maximally monotone mappings in Banach spaces

  Wega, G. B. & Zegeye, H., Sep 1 2020, In: Computational and Applied Mathematics. 39, 3, 16 p., 223.

  Research output: Contribution to journal › Article › peer-review

  • Banach spaces
  • Monotone Mapping
  • Convergence Results
  • Banach space
  • Nonlinear Mapping
  1 Citation (Scopus)
• 2007

  A geophysical investigation of the structural controls along the southern margin of Lake Ngami, northwestern Botswana using seismic refraction and DC resistivity

  Shemang, E. M., Molwalefhe, L. N. & Mosweu, E., 2007, Environmental and Engineering Geophysical Society - 20th, SAGEEP 2007: Geophysical Investigation and Problem Solving for the Next Generation. Vol. 1. p. 498-506 9 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Botswana
  • lakes
  • Refraction
  • structural control
  • Lakes
• 2016

  Data size reduction and maximization of the network lifetime over wireless sensor network

  Kuthadi, V. M., Selvaraj, R. & Marwala, T., Jan 1 2016, Information Systems Design and Intelligent Applications - Proceedings of 3rd International Conference, INDIA 2016. Mandal, J. K., Bhateja, V., Udgata, S. K. & Satapathy, S. C. (eds.). Springer Verlag, p. 731-750 20 p. (Advances in Intelligent Systems and Computing; vol. 433).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Base stations
  • Wireless sensor networks
  • Data compression
  • Data communication systems

• Eidps: An efficient approach to protect the network and intrusion prevention

  Selvaraj, R., Kuthadi, V. M. & Marwala, T., Jan 1 2016, Information Systems Design and Intelligent Applications - Proceedings of 3rd International Conference, INDIA 2016. Satapathy, S. C., Mandal, J. K., Udgata, S. K. & Bhateja, V. (eds.). Springer Verlag, p. 35-47 13 p. (Advances in Intelligent Systems and Computing; vol. 434).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Servers
  • Intrusion detection
  • Cloud computing
  • Internet
  • Viruses
• 2014

  Hybrid technique for frequent pattern extraction from Sequential Database

  Selvaraj, R., Kuthadi, V. M. & Marwala, T., Jan 1 2014, Proceedings of the 3rd International Conference on Frontiers of Intelligent Computing: Theory and Applications, FICTA 2014. Udgata, S. K., Biswal, B. N., Mandal, J. K. & Satapathy, S. C. (eds.). Springer Verlag, p. 265-275 11 p. (Advances in Intelligent Systems and Computing; vol. 327).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Data mining
• 2010

  A STUDY OF SECURITY CHALLENGES IN WIRELESS SENSOR NETWORKS

  Selvaraj, R., Rajendra, S. & Kuthadi, V. M., 2010, In: JATIT. 20, 1, p. 39-45

  Research output: Contribution to journal › Article › peer-review

  9 Citations (Scopus)
• 2013

  An doubly linked tree approach for webservice based e-learning

  Selvaraj, R. & Kuthadi, V. M., 2013.

  Research output: Contribution to conference › Paper › peer-review

  • E-learning
  • Distance education
  • Education
  • Learning systems
  • Scalability
• 2017

  Alphabet-dependent Parallel Algorithm for Suffix Tree Construction for Pattern Searching

  Dinakenyane, O., Schroeder, H., Kuthadi, V. M. & Kaniwa, F., 2017, In: arXiv preprint arXiv:1704.05660.

  Research output: Contribution to journal › Article › peer-review

• Effect of hollow centre post in coupled combline resonators

  Pholele, T. M., Chuma, J. M. & Ngebani, I., 2017, p. 1-2. 2 p.

  Research output: Contribution to conference › Paper › peer-review

  Open Access

  • hollow
  • resonant frequencies
  • resonators
  • coupling coefficients
  • performance

• Nutrient Supplying Potential of Different Spent Mushroom Substrate Preparations as Soil Amendment in a Potting Media

  Ultra Jr, V., Ong Sotto, J. M. E. & Punzalan, M. R., 2017.

  Research output: Contribution to conference › Paper › peer-review

  Open Access

  • spent mushroom compost
  • soil amendments
  • growing media
  • nitrogen fertilizers
  • nutrients
• 2018

  The Removal of Cu (II) from Aqueous Solution using Sodium Borohydride as a Reducing Agent

  Sithole, N. T., Ntuli, F. & Mashifana, T., 2018.

  Research output: Contribution to conference › Paper › peer-review

  Open Access

  • aqueous solution
  • toxic metal
  • sodium
  • wastewater
  • removal
• 2017

  Downlink beamforming design with simultaneous energy and secure information transmission

  Elsabae, R., Basutli, B., Gong, Y. & Lambotharan, S., 2017.

  Research output: Contribution to conference › Paper › peer-review

  Open Access

  • Beamforming
  • Energy transfer
  • Energy harvesting
  • Frequency bands
  • Communication systems
• 2013

  Multiple state representation scheme for organic bulk heterojunction solar cells: A novel analysis perspective

  Einax, M., Dierl, M., Schiff, P. R. & Nitzan, A., 2013, In: EPL (Europhysics Letters). 104, 4

  Research output: Contribution to journal › Article › peer-review

  10 Citations (Scopus)
• 2019

  Intercritical Annealing Temperature: Influence on the Mechanical Properties of Low Alloy Dual-Phase Fe/0.08C/0.4Mn Steel.

  Ogunmefun, A. O., Jamiru, T., Sadiku, E. R., Obadele, B. A. & Olorundaisi, E., Oct 2019, 2019 Open Innovations Conference, OI 2019. Ochara, N. M. & Odhiambo, J. N. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 141-146 6 p. 8908167. (2019 Open Innovations Conference, OI 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Steel
  • heat
  • Annealing
  • Temperature
  • Mechanical properties
• 2018

  Steganography techniques for digital images

  Yahya, A., Jun 12 2018, Springer International Publishing AG. 122 p.

  Research output: Book/Report › Book

  • Steganography
  • Cryptography
  • Synchronization
  • Discrete wavelet transforms
  • Decoding
  4 Citations (Scopus)
• 2017

  Nanoindentation studies on the elastic and plastic deformation properties of sintered DSS reinforced with tin nanoparticles.

  Mphahlele, M. R., Oke, S. R., Ige, O. O., Obadele, B. A. & Olubambi, P. A., Jan 1 2017, p. 1218-1219. 2 p.

  Research output: Contribution to conference › Paper › peer-review

  • Duplex stainless steel
  • Nanoindentation
  • Tin
  • Elastic deformation
  • Grain boundaries

• Understanding the spark plasma sintering behaviour of Ti-6Al-4V reinforced with nanosized TiN

  Falodun, O. E., Maja, M. E., Obadele, B. A., Oke, S. R., Ige, O. O. & Olubambi, P. A., Jan 1 2017, Materials Science and Technology Conference and Exhibition 2017, MS and T 2017. Association for Iron and Steel Technology, AISTECH, p. 1346-1348 3 p. (Materials Science and Technology Conference and Exhibition 2017, MS and T 2017; vol. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Spark plasma sintering
  • Microhardness
  • titanium nitride
  • Titanium nitride
  • Composite materials
• 2019

  Electrochemical study of calcareous deposit formation in simulated soil solution under cathodic protection

  Phumlani, M., Philippe, R., Babatunde, O., Marc, J. & Peter, O., 2019, Key Engineering Materials. Trans Tech Publications Ltd, p. 307-312 6 p. (Key Engineering Materials; vol. 821 KEM).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • soils
  • deposits
  • brucite
  • electrolytes
  • plots
• 2017

  Nanoindentation studies on the behaviour of tin nanoceramic reinforced Ti-6Al-4V matrix composite

  Maja, M. E., Obadele, B. A., Falodun, E. O., Ige, O. O. & Olubambi, P. A., Jan 1 2017, p. 1186-1187. 2 p.

  Research output: Contribution to conference › Paper › peer-review

  • Nanoindentation
  • Tin
  • Elastic moduli
  • Hardness
  • Volume fraction
• 2018

  Implementation of Lean manufacturing tools in an abattoir: A case study of a Botswana Private Beef Abattoir

  Kufigwa, B., Gwangwava, N., Addo-Tenkorang, R., Ogunmuyiwa, E. N. & Ude, A. U., 2018, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2018, NOV, p. 368-380 13 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Beef
  • Botswana
  • Lean production
  • Lean Manufacturing
  • Process Efficiency