Find Research outputs

Oladele, A. S., Nov 15 2013, Airfield and Highway Pavement 2013: Sustainable and Efficient Pavements - Proceedings of the 2013 Airfield and Highway Pavement Conference. p. 1358-1369 12 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

3 Citations (Scopus)

2000

Life-span of solutions to nonlinear dissipative evolution equations: A singular perturbation approach

Milani, A., 2000, In: Rendiconti dell'Istituto di Matematica dell'Universita di Trieste. 31, p. 189-208 20 p.

Research output: Contribution to journal › Article › peer-review

2021

Automatic animal identification from drone camera based on point pattern analysis of herd behaviour

Petso, T., Jamisola, R. S., Mpoeleng, D., Bennitt, E. & Mmereki, W., Dec 2021, In: Ecological Informatics. 66, 101485.

Research output: Contribution to journal › Article › peer-review

2017

Dissolving dolomite in a stable UHP mineral assemblage: Evidence from Cal-Dol marbles of the Dora-Maira Massif (Italian Western Alps)

Ferrando, S., Groppo, C., Frezzotti, M. L., Castelli, D. & Proyer, A., 2017, In: American Mineralogist. 102, 1-2, p. 42-60 19 p.

Research output: Contribution to journal › Article › peer-review

17 Citations (Scopus)

2015

Nano-fertilizer affects the growth, development, and chemical properties of rice

Benzon, H. R. L., Rubenecia, M. R. U., Ultra Jr, V. & Lee, S. C., 2015, In: International Journal of Agronomy and Agricultural Research (IJAAR). 7, 1, p. 105-117 13 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Antioxidant and Fe2+-chelating propertiesof Eucommiaulmoides collected from Kyungpook, South Korea

Kang, Y., Lee, S. W., Cha, S. W., Ultra Jr, V., Benzon, H. R. L. & Lee, S. C., 2015, p. 209-211.

Research output: Contribution to conference › Paper › peer-review

2017

Perceptions of University of Botswana Academic Staff on Web 2.0 Technology Adoption

Totolo, A., Comma, S. & Mpoeleng, D., 2017, In: Informatics Studies. 4, 1

Research output: Contribution to journal › Article › peer-review

2020

Fabrication of functionally graded 316L austenitic and 2205 duplex stainless steels by spark plasma sintering

Obadele, B. A., Adesina, O. S., Oladijo, O. P. & Ogunmuyiwa, E. N., Dec 30 2020, In: Journal of Alloys and Compounds. 849, 7 p., 156697.

Research output: Contribution to journal › Article › peer-review

5 Citations (Scopus)

2003

Corrosion resistance potential of boron phosphide films in a naval environment

Haddow, D., Ogwu, A. A. & Placido, F., 2003, In: Proceedings of SPIE - The International Society for Optical Engineering. 5078, p. 109-120 12 p.

Research output: Contribution to journal › Conference article › peer-review

4 Citations (Scopus)

2018

Effect of sintering parameters on densification and microstructural evolution of nano-sized titanium nitride reinforced titanium alloys

Falodun, O. E., Obadele, B. A., Oke, S. R., Maja, M. E. & Olubambi, P. A., Mar 5 2018, In: Journal of Alloys and Compounds. 736, p. 202-210 9 p.

Research output: Contribution to journal › Article › peer-review

40 Citations (Scopus)

2009

Effects of dietary energy level and tanniferous Acacia karroo leaf meal level of supplementation at finisher stage on performance and carcass characteristics of ross 308 broiler chickens in South Africa

Ng'ambi, J. W., Nakalebe, P. M., Norris, D., Malatje, M. S. & Mbajiorgu, C. A., Jan 1 2009, In: International Journal of Poultry Science. 8, 1, p. 40-46 7 p.

Research output: Contribution to journal › Article › peer-review

6 Citations (Scopus)

2019

Development of available transfer capability enhancement using intelligent genetic algorithm for IEEE bus system

Rohini, R., Rao, D. N., Ravi, S. & Sampath Kumar, V., Sep 2019, In: Intelligent Automation and Soft Computing. 25, 3, p. 433-440 8 p.

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

2018

PV module integrated dual boost isolated DC-DC converter fed three-phase micro-inverter

Geetha, P. & Ravi, S., Jan 15 2018, In: Journal of Testing and Evaluation. 46, 3, p. 1145-1157 13 p.

Research output: Contribution to journal › Article › peer-review

5 Citations (Scopus)

2001

Stress formation during self-assembly of alkanethiols on differently pre-treated gold surfaces

Hansen, A. G., Mortensen, M. W., Andersen, J. E. T., Ulstrup, J., Kühle, A., Garnæs, J. & Boisen, A., Dec 1 2001, In: Probe Microscopy. 2, 2, p. 139-149 11 p.

Research output: Contribution to journal › Article › peer-review

23 Citations (Scopus)

2020

Application of coal fly ash for treatment of wastewater containing a binary mixture of copper and nickel

Lekgoba, T., Ntuli, F. & Falayi, T., Dec 6 2020, In: Journal of Water Process Engineering. 40, 12 p., 101822.

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

2016

Influence of charcoal-based soil amendments on growth and nutrient uptake of rice (Oryza sativa) in Cadmium contaminated soil

Ultra Jr, V., Nunez, J. P. & Lee, S. C., 2016, In: Emirates Journal of Food and Agriculture. 28, 12, p. 872-881 10 p.

Research output: Contribution to journal › Article › peer-review

Open Access

8 Citations (Scopus)

2008

X-ray group and cluster mass profiles in MOND: Unexplained mass on the group scale

Angus, G. W., Famaey, B. & Buote, D. A., Jul 2008, In: Monthly Notices of the Royal Astronomical Society. 387, 4, p. 1470-1480 11 p.

Research output: Contribution to journal › Article › peer-review

63 Citations (Scopus)

2013

Effects of replicative fitness on competing HIV strains

Chirove, F. & Lungu, E. M., Jul 1 2013, In: BioSystems. 113, 1, p. 28-36 9 p.

Research output: Contribution to journal › Article › peer-review

2 Citations (Scopus)

2019

Fuzzy Inference System-Based for TBM Field Penetration Index Estimation in Rock Mass

Adoko, A. C. & Yagiz, S., Jun 1 2019, In: Geotechnical and Geological Engineering. 37, 3, p. 1533-1553 21 p.

Research output: Contribution to journal › Article › peer-review

4 Citations (Scopus)

2018

Fruits and vegetables consumption: A case study of food culture vis-à-vis health awareness among the students of the University of Johannesburg, South Africa

Ayeleru, O. O., Ogundele, O. M., Gbashi, S., Dlova, S., Adeniran, J. A., Kayitesi, E., Ntuli, F., Belaid, M., Mbohwa, C. & Olubambi, P. A., Apr 23 2018, Fruit and Vegetable Consumption and Health: New Research. Nova Science Publishers Inc, p. 145-162 18 p.

Research output: Chapter in Book/Report/Conference proceeding › Chapter

2005

Reaction cross sections for protons on ¹²C, ⁴⁰Ca, ⁹⁰Zr, and ²⁰⁸Pb at energies between 80 and 180 MeV

Lantz, M., Jacobs, M. N., Auce, A., Carlson, R. F., Cowley, A. A., Förtsch, S. V., Hillhouse, G. C., Ingemarsson, A., Johansson, R., Lawrie, K. J., Shachno, M. J., Smit, F. D., Stander, A., Steyn, G. F., Tibell, G. & Van Zyl, J. J., May 24 2005, International Conference on Nuclear Data for Science and Technology. Vol. 769. p. 846-849 4 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

3 Citations (Scopus)

2014

Determination of iron by Z-GFAAS and the influence of short-term precision and long-term precision

Andersen, J. E. T., Feb 1 2014, In: Central European Journal of Chemistry. 12, 2, p. 194-205 12 p.

Research output: Contribution to journal › Article › peer-review

8 Citations (Scopus)

Haptic exploration of unknown surfaces with discontinuities

Jamisola, R. S., Kormushev, P., Bicchi, A. & Caldwell, D. G., Oct 31 2014, IROS 2014 Conference Digest - IEEE/RSJ International Conference on Intelligent Robots and Systems. Institute of Electrical and Electronics Engineers Inc., p. 1255-1260 6 p. 6942718

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

8 Citations (Scopus)

2019

Tungsten carbide thin films Review: Effect of deposition parameters on film microstructure and properties

Phiri, R. R., Oladijo, O. P. & Akinlabi, E. T., 2019, In: Procedia Manufacturing. 35, p. 522-528 7 p.

Research output: Contribution to journal › Conference article › peer-review

Open Access

1988

Global existence for quasi-linear dissipative wave equations with large data and small parameter

Milani, A. J., Jun 1988, In: Mathematische Zeitschrift. 198, 2, p. 291-297 7 p.

Research output: Contribution to journal › Article › peer-review

4 Citations (Scopus)

2013

Development of adsorbent from banana peel for wastewater treatment

Abdulfatai, J., Saka, A. A., Afolabi, A. S. & Micheal, O., 2013, Mechanical Materials and Manufacturing Engineering II. Vol. 248. p. 310-315 6 p. (Applied Mechanics and Materials; vol. 248).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

12 Citations (Scopus)

2016

Transforming natural language requirement descriptions into analysis models

Chioasca, E., Letsholo, K. J. & Zhao, L., 2016, Google Patents.

Research output: Book/Report › Book

2015

Asymptotics of work distribution for a Brownian particle in a time-dependent anharmonic potential

Holubec, V., Dierl, M., Einax, M., Maass, P., Chvosta, P. & Ryabov, A., 2015, In: Physica Scripta. 2015, T165

Research output: Contribution to journal › Article › peer-review

5 Citations (Scopus)

2017

High Performance Liquid Chromatography (HPLC) Stability Indicating Method for the Determination of Bromazepam Via its Copper (II) Chelates

Alula, M. T., Takele, A., Attaya, A-M. I. M. & Hymete, A., 2017, In: Open Pharmaceutical Sciences Journal. 4, 1

Research output: Contribution to journal › Article › peer-review

Open Access

2003

Physico-chemical properties and clay fraction mineralogy of the subsurface sediments around Gaborone landfill, Botswana

Totolo, O., Ngole, V. M. & Ekosse, G. E., 2003, In: Botswana Journal of Earth Sciences . p. 85-97

Research output: Contribution to journal › Article › peer-review

1991

Characterization of metal-overlayer growth-modes in Auger crystal surface analysis

Andersen, J. E. T. & Møller, P. J., Nov 2 1991, In: Surface Science. 258, 1-3, p. 247-258 12 p.

Research output: Contribution to journal › Article › peer-review

2 Citations (Scopus)

2011

A knowledge identification framework for the engineering of ontologies in system composition processes

Gillespie, M. G., Hlomani, H., Kotowski, D. & Stacey, D. A., 2011, Proceedings of the 2011 IEEE International Conference on Information Reuse and Integration, IRI 2011. p. 77-82 6 p. 6009524

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

3 Citations (Scopus)

2000

Hydrogeochemical impacts of the Gaborone landfill on its surrounding subsurface environments

Bogatsu, Y., Atekwana, E., Ekosse, G-I., Atekwana, E. & Totolo, O., Jan 1 2000, In: Botswana Notes and Records. 32, 6 p.

Research output: Contribution to journal › Article › peer-review

2016

The potential role of NGC 205 in generating Andromeda's vast thin corotating plane of satellite galaxies

Angus, G. W., Coppin, P., Gentile, G. & Diaferio, A., Nov 1 2016, In: Monthly Notices of the Royal Astronomical Society. 462, 3, p. 3221-3242 22 p., stw1822.

Research output: Contribution to journal › Article › peer-review

7 Citations (Scopus)

1976

Fluoride in plants colonising fluorspar mine waste in the peak district and weardale

Cooke, J. A., Johnson, M. S., Davidson, A. W. & Bradshaw, A. D., Jan 1 1976, In: Environmental Pollution (1970). 11, 1, p. 9-23 15 p.

Research output: Contribution to journal › Article › peer-review

44 Citations (Scopus)

2017

Influence of Sintering Temperature on Hardness and Wear Properties of TiN Nano Reinforced SAF 2205

Oke, S. R., Ige, O. O., Falodun, O. E., Obadele, B. A., Mphalele, M. R. & Olubambi, P. A., Dec 21 2017, In: IOP Conference Series: Materials Science and Engineering. 272, 1, 012030.

Research output: Contribution to journal › Conference article › peer-review

Open Access

3 Citations (Scopus)

2016

Effect of starting powder particle size and heating rate on spark plasma sintering of Fe-Ni alloys

Shongwe, M. B., Ramakokovhu, M. M., Diouf, S., Durowoju, M. O., Obadele, B. A., Sule, R., Lethabane, M. L. & Olubambi, P. A., Sep 5 2016, In: Journal of Alloys and Compounds. 678, p. 241-248 8 p.

Research output: Contribution to journal › Article › peer-review

43 Citations (Scopus)

2018