Find Research outputs

Search results

• Conference contribution

  Kimberlites Prospecting in Bastar: Future Perspectives

  Verma, R., Nov 11 2000, Proc. Nat. Symposium on Milestones in Petrology at the end of the Millennium and future perspective: Dept. of Geology, BHU.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

  File

• Kinematic Analysis of a Critical Road Section Along the Lengpui Airport Road, Mizoram, India,

  Verma, R., Nov 20 2020, International Webinar on Natural Hazards and Management: Institute of Geology, Karelian Research Centre, Russian Academy of Sciences, Petrozavodsk, Russia.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

  File

• Kinematics Analyses of Elephant Rock Section, NH- 44 A, Aizawl, Mizoram

  Verma, R., Aug 14 2018, Conference on Geological and Environmental Sustainability: OMIX INTERNATIONAL.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

  File

• Landslide Hazard Estimation in Hunthar Veng Section, Aizawl, Mizoram

  Verma, R., Mar 28 2014, Landslide Hazard Estimation in Hunthar Veng Section, Aizawl, Mizoram: Kumaun University, Nanital, India.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

  File

• Landslide Hazard Estimation in Thakthing Veng Road Section, Aizawl, Mizoram.

  Verma, R., 2014, Geology, Geotectonics, Geo-Hazards and Natural Resources of North East India.: Dept. of Geology, PUC, Aizawl, India.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

  File

• Landslide hazard in Aizawl Township, Mizoram, India

  Verma, R., Jun 6 2010, National Workshop on Landslide and Environmental Degradation in Hilly Terrain: L.S.M. Govt. P.G. College, Pithoragarh, Uttaranchal, India.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

  File

• Landslide Hazard in Mizoram: Case Study of Laipuitlang Landslide, Aizawl.

  Verma, R., Sep 17 2014, XII IAEG Congress, : Torino, Italy.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

  File

• Landslide Hazard Zonation Along NH54A From Lunglawn to Zotlang, Lunglei District, Mizoram

  Verma, R., Nov 17 2020, International Seminar on Recent Advances in Science and Technology: Mizoram University, Aizawl, Mizoram.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

  File

• Landslide Hazard Zonation Along NH-54A from Lunglawn to Zotlang, Lunglei District, Mizoram, India

  Verma, R., Nov 19 2020, International Webinar on Natural Hazards and Management: Bundelkhand University & Institute of Geology, KRC, RAS, Petrozavodsk, Russia.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

  File

• Landslide Problems in Mizoram: A Case Study of Ngaizel Landslide, Aizawl, Mizoram.

  Verma, R., 2012, Geology, Biodiversity and Natural Resources of Himalaya and their Intellectual Property Rights: Dept. of Geology, L.S.M. Degree College, Pithoragarh,India.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

  File

• Landslide Problems in Mizoram: Causes and Remedies

  Verma, R., Mar 21 2001, Nat. Symposium on Geology and Environment of Lesser Himalaya: Deptt. of Geology, Kumaun University, Nainital, India.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

  File

• Leadership in the mining sector: A functional approach for optimum team performance in the fourth industrial revolution

  Manyuchi, M. M., Mbohwa, C. & Muzenda, E., 2020, Proceedings of the International Conference on Industrial Engineering and Operations Management. March ed. IEOM Society, p. 2932-2936 5 p. (Proceedings of the International Conference on Industrial Engineering and Operations Management; vol. 0, no. March).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

• Learning reactive robot behavior for autonomous valve turning

  Ahmadzadeh, S. R., Kormushev, P., Jamisola, R. S. & Caldwell, D. G., Jan 1 2015, 2014 IEEE-RAS International Conference on Humanoid Robots, Humanoids 2014. IEEE Computer Society, Vol. 2015-February. p. 366-373 8 p. 7041386

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Leveraging user knowledge: Design principles for an intuitive user interface for building workflows

  Kotowski, D., Henriques, G., Gillespie, M. G., Hlomani, H. & Stacey, D. A., 2011, KEOD 2011 - Proceedings of the International Conference on Knowledge Engineering and Ontology Development. p. 176-182 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Linear and exponential kinetic modelling for biogas production in municipal waste

  Manyuchi, M. M., Mbohwa, C. & Muzenda, E., 2018, Proceedings of the International Conference on Industrial Engineering and Operations Management, IEOM 2018. IEOM Society, p. 31-36 6 p. (Proceedings of the International Conference on Industrial Engineering and Operations Management; vol. 2018-March).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Liquid metallurgy synthesis and thermo-electrical characterization of copper-aluminum metal matrix composite

  Osoba, O. L., Afolabi, A. S., Vodal, E. & Fasuba, O. A., Jul 8 2013, Materials Science and Chemical Engineering. p. 650-655 6 p. (Advanced Materials Research; vol. 699).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Logistics & supply chains management tracking networks: Data-management system integration / interfacing issues

  Addo-Tenkorang, R., Helo, P. T., Shamsuzzoha, A. H. M., Ehrs, M. & Phuong, D., Nov 1 2012, 2012 Proceedings of Portland International Center for Management of Engineering and Technology: Technology Management for Emerging Technologies, PICMET'12. p. 2198-2206 9 p. 6304234

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  4 Citations (Scopus)

• Logistics tracking: An implementation issue for delivery network

  Shamsuzzoha, A., Addo-Tenkorang, R., Phuong, D. & Helo, P., 2011, PICMET'11 - Portland International Center for Management of Engineering and Technology, Proceedings - Technology Management in the Energy-Smart World. 6017949

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  5 Citations (Scopus)

• Low complexity burst allocation algorithm with high frame utilization for Mobile WiMAX (802.16e)

  Ali, Z. G., Ahmad, R. B., Yahya, A., Hassnawi, L. A. & Aldhaibani, J. A., Sep 2 2013, BEIAC 2013 - 2013 IEEE Business Engineering and Industrial Applications Colloquium. p. 404-409 6 p. 6560158

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Magnetorheological flow in pipes: An exploration of the time-variation of herschel-bulkley parameters

  Letelier, M. F., Stockle, J. S. & Siginer, D. A., Jan 1 2007, Heat Transfer, Fluid Flows, and Thermal Systems. American Society of Mechanical Engineers (ASME), Vol. 8. p. 1947-1952 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Magnitudes of coupling coefficients of horizontal and vertical slots in a dual mode filter

  Pholele, T. M. & Chuma, J. M., 2010, Proceedings of the 3rd IASTED African Conference on Modelling and Simulation, AfricaMS 2010. p. 1-4 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Manipulation of organic and inorganic colloidal particles by dielectrophoretic forces

  Asmatulu, R. & Siginer, D., Jan 1 2007, Micro and Nano Systems. American Society of Mechanical Engineers (ASME), Vol. 11. p. 81-84 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Martensite and nanocrystalline phase formation in rapidly solidified Ni₂MnGa alloy by melt-spinning

  Prasad, R. V. S. & Phanikumar, G., 2010, Solidification and Gravity V. Trans Tech Publications Ltd, p. 35-40 6 p. (Materials Science Forum; vol. 649).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Mathematical modelling of magneto-hydrodynamic dampers with time-varying fluid properties

  Letelier, M. F., Rouliez, J. P., Siginer, D. A. & Corral, O. F., Dec 1 2005, American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED. Vol. 261 FED. p. 913-918 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  6 Citations (Scopus)

• Mathematical model on magnetic drug targeting in a permeable microvessel

  Shaw, S., Sibanda, P. & Murthy, P. V. S. N., 2013, Biomedical and Biotechnology Engineering. American Society of Mechanical Engineers (ASME), Vol. 3 B.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Mathematicians and planetary challenges

  Engler, H., Apte, A., da Silva Dias, P. L., Esteban, M. J., Lungu, E. & Sagastizabal, C., 2018, Invited Lectures. Sirakov, B., de Souza, P. N. & Viana, M. (eds.). World Scientific Publishing Co. Pte Ltd, p. 1111-1124 14 p. (Proceedings of the International Congress of Mathematicians, ICM 2018; vol. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• MATLAB/Simulink based design and development of a Buck Boost converter as a smooth starter for DC motor control

  Rajeswari, R., Ravi, S., Mezhuyev, V. & Kumarakrishnan, V., Oct 5 2015, Proceedings of the IEEE International Conference on Soft-Computing and Network Security, ICSNS 2015. Institute of Electrical and Electronics Engineers Inc., 7292440

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Measurement study on the end-to-end data transmission in motorways surveillance system using Wireless Ad Hoc Camera Networks (WAHCN)

  Hassnawi, L. A., Ahmad, R. B., Yahya, A., Elshaikh, M., Al-Rawi, A. A. A., Ali, Z. G. & Aljunid, S. A., Dec 1 2011, Proceedings - 2nd International Conference on Engineering and Industries, ICEI 2011. p. 26-30 5 p. 6218522

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Mechanical properties of hot-pressed boron suboxide with chromium boride additive

  Ogunmuyiwa, E. N., Johnson, O. T., Sigalas, I., Hermann, M. & Afolabi, A. S., Jan 1 2014, World Congress on Engineering, WCE 2014. Douglas, C., Ao, S. I., Ao, S. I., Grundfest, W. S., Burgstone, J., Douglas, C., Burgstone, J. & Ao, S. I. (eds.). Newswood Limited, Vol. 2. p. 632-636 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Methane production from anaerobic co-digestion of cow dung, chicken manure, pig manure and sewage waste

  Sebola, M. R., Tesfagiorgis, H. B. & Muzenda, E., Jan 1 2015, WCE 2015 - World Congress on Engineering 2015. Ao, S. I., Gelman, L., Korsunsky, A. M., Ao, S. I., Hukins, D. W. L., Hunter, A., Ao, S. I. & Gelman, L. (eds.). Newswood Limited, Vol. 2217. p. 592-598 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Microstructure and corrosion behaviour of TiC reinforced duplex stainless steels matrix composites sythesized by laser melt injection

  Obadele, B., Olubambi, P. & Johnson, O., May 15 2012, Extraction and Processing Division - 2012 EPD Congress - Held During the TMS 2012 Annual Meeting and Exhibition. p. 33-40 8 p. (TMS Annual Meeting).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Microstructure and dry sliding wear property of laser clad Ti-6Al-4V under different counterface materials

  Obadele, B. A., Olubambi, P. A. & Pityana, S., Jan 1 2014, AMI Light Metals Conference 2014. Curle, U. A. & Möller, H. (eds.). Trans Tech Publications Ltd, p. 259-265 7 p. (Advanced Materials Research; vol. 1019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Microstructure and magnetic properties of rapidly solidified Ni ₂(Mn,Fe)Ga Heusler alloys

  Prasad, R. V. S., Manivel Raja, M. & Phanikumar, G., 2009, NEMS/MEMS Technology and Devices - Selected, peer reviewed papers from the International Conference on Materials for Advanced Technologies 2009, ICMAT 2009. p. 215-218 4 p. (Advanced Materials Research; vol. 74).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  7 Citations (Scopus)

• Microstructure and mechanical properties of ultra-fine grained copper processed by equal channel angular pressing technique

  Sanusi, K. O., Afolabi, A. S. & Muzenda, E., Jan 1 2014, World Congress on Engineering, WCE 2014. Douglas, C., Ao, S. I., Ao, S. I., Grundfest, W. S., Burgstone, J., Douglas, C., Burgstone, J. & Ao, S. I. (eds.). Newswood Limited, Vol. 2. p. 1049-1053 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Microstructure and wear behaviour of Al/TiB 2 metal matrix composite

  Popoola, A. P., Pityana, S. & Ogunmuyiwa, E., 2011, Laser and Plasma Applications in Materials Science, LAPAMS 2010. Vol. 227. p. 23-26 4 p. (Advanced Materials Research; vol. 227).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  10 Citations (Scopus)

• Mineral Processing Plant Simulator in Continuous Surface Mining

  Frimpong, S., Er, G. K. & Suglo, R. S., 2003, 12th International Symposium on Mine Planning and Equipment Selection. 1 ed. p. 365-368 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Mine stope performance assessment in unfavorable rock mass conditions using neural network-based classifiers

  Adoko, A. C., Yakubov, K. & Alipov, A., 2019, 5th ISRM Young Scholars' Symposium on Rock Mechanics and International Symposium on Rock Engineering for Innovative Future, YSRM 2019. International Society for Rock Mechanics and Rock Engineering, p. 451-456 6 p. (5th ISRM Young Scholars' Symposium on Rock Mechanics and International Symposium on Rock Engineering for Innovative Future, YSRM 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Minimax method for the inversion of Fredholm equations of the first kind and the determination of linear relaxation spectra

  Yanovsky, Y. G., Basistov, Y. A. & Siginer, D. A., 1995, Developments and Applications of Non-Newtonian Flows. ASME, Vol. 231. p. 39-52 14 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Mobile WiMAX resource allocation design goals: Key features/factors/issues

  Ali, Z. G., Ahmad, R. B., Yahya, A. & Hassnawi, L. A., Jan 1 2014, Advanced in Computer Science and Its Applications, CSA 2013. Springer Verlag, p. 661-667 7 p. (Lecture Notes in Electrical Engineering; vol. 279 LNEE).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Modeling a Hybrid Pavement Conditions Performance Framework for Botswana District Road Transportation Networks

  Oladele, A. S., 2017, Airfield and Highway Pavements 2017: Design, Construction, Evaluation, and Management of Pavements - Proceedings of the International Conference on Highway Pavements and Airfield Technology 2017. Ozer, H., Velez-Vega, E. M., Al-Qadi, I. L. & Murrell, S. (eds.). American Society of Civil Engineers (ASCE), p. 156-165 10 p. (Airfield and Highway Pavements 2017: Design, Construction, Evaluation, and Management of Pavements - Proceedings of the International Conference on Highway Pavements and Airfield Technology 2017; vol. 2017-August).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Modeling high-Q square spiral with variable segment width and spacing

  Kobe, O. B., Chuma, J. M., Jamisola, R. S. & Chose, M., Dec 5 2016, 2016 IEEE Radio and Antenna Days of the Indian Ocean, RADIO 2016. Institute of Electrical and Electronics Engineers Inc., 7772019

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

• Modeling of the mechanical responses of nanocrystalline metals and alloys

  Sanusi, K. O., Afolabi, A. S., Muzenda, E. & Akinlabi, E. T., Jan 1 2015, WCE 2015 - World Congress on Engineering 2015. Ao, S. I., Gelman, L., Gelman, L., Hukins, D. W. L., Hunter, A., Korsunsky, A. M., Ao, S. I. & Ao, S. I. (eds.). Newswood Limited, Vol. 2218. p. 1177-1182 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Modeling the kinematics of an Autonomous Underwater Vehicle for range-bearing simultaneous localization and Mapping

  Matsebe, O., Holtzhausen, S., Kumile, C. M. & Tlale, N. S., 2008, 15th International Conference on Mechatronics and Machine Vision in Practice, M2VIP'08. p. 412-417 6 p. 4749569

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Modelling and control of an anfis temperature controller for plastic extrusion process

  Ravi, S. & Balakrishnan, P. A., Dec 1 2010, 2010 IEEE International Conference on Communication Control and Computing Technologies, ICCCCT 2010. p. 314-320 7 p. 5670572

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  17 Citations (Scopus)

• Modelling climate change effects on sustainable transport facilities through time series and rainfall trend analysis of Palapye-Botswana

  Oladelea, A. S., Fagbamigbeb, A. F. & Bafitlhilec, T. M., 2016, Proceedings of the 6th IASTED International Conference on Modelling and Simulation, AfricaMS 2016. Acta Press, p. 293-300 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Modelling income poverty in the Geographic Targeting Geo-Information System

  Akinyemi, F. O., 2005, Proceedings 2005 - The 8th AGILE International Conference on Geographic Information Science, AGILE 2005.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Modelling the late-time Hubble Space Telescope imaging of the outburst of the recurrent nova RS Ophiuchi (2006)

  Ribeiro, V. A. R. M., Bode, M. F. & Williams, R., Aug 1 2012, Feeding Compact Objects: Accretion on All Scales. Zhang, C., Belloni, T., Mendez, M. & Zhang, S. (eds.). S290 ed. p. 137-140 4 p. (Proceedings of the International Astronomical Union; vol. 8, no. S290).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Modular relative Jacobian for dual-arms and the wrench transformation matrix

  Jamisola, R. S., Kormushev, P., Caldwell, D. G. & Ibikunle, F., Sep 23 2015, Proceedings of the 2015 7th IEEE International Conference on Cybernetics and Intelligent Systems, CIS 2015 and Robotics, Automation and Mechatronics, RAM 2015. Institute of Electrical and Electronics Engineers Inc., p. 181-186 6 p. 7274617

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  10 Citations (Scopus)

• Monitoring and evaluation of the e-readers project in rural Tanzania

  Machuve, D. Z., Zlotnikova, I. & Nyambo, D., Mar 4 2014, Proceedings of the 2nd Pan African International Conference on Science, Computing and Telecommunications, PACT 2014. Institute of Electrical and Electronics Engineers Inc., p. 62-67 6 p. 7055138

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Multi-carrier frequency hopping spread spectrum system with girth-six low-density parity-check codes

  Ghani, F. & Yahya, A., 2009, 2009 International Multimedia, Signal Processing and Communication Technologies, IMPACT 2009. p. 258-260 3 p. 5164224

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)