Find Research outputs

Search results

• Article

  Decolourization of melanoidin containing wastewater using South African coal fly ash

  Ojijo, V. O., Onyango, M. S., Ochieng, A. & Otieno, F., 2010, In: International Journal of Civil and Environmental Engineering. 2, 1, p. 17-23 7 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  2 Citations (Scopus)

• Decomposing the educational inequalities in the factors associated with severe acute malnutrition among under-five children in low- And middle-income countries

  Fagbamigbe, A. F., Kandala, N. B. & Uthman, O. A., Apr 25 2020, In: BMC Public Health. 20, 1, 14 p., 555.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  2 Citations (Scopus)

• Decomposition analysis of the compositional and contextual factors associated with poor-non-poor inequality in diarrhoea among under-five children in low- and middle-income countries

  Fagbamigbe, A. F., Ologunwa, O. P., Afolabi, E. K., Fagbamigbe, O. S. & Uthman, A. O., Apr 2021, In: Public Health. 193, p. 83-93 11 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Defluoridation of Groundwater Using Raw Bauxite: Kinetics and Thermodynamics

  Kayira, C., Sajidu, S., Masamba, W. & Mwatseteza, J., 2014, In: Clean-Soil Air Water. 42, 5, p. 546-551 6 p.

  Research output: Contribution to journal › Article › peer-review
  10 Citations (Scopus)

• Deformation dependence of the isovector giant dipole resonance: The neodymium isotopic chain revisited

  Donaldson, L. M., Bertulani, C. A., Carter, J., Nesterenko, V. O., von Neumann-Cosel, P., Neveling, R., Ponomarev, V. Y., Reinhard, P-G., Usman, I. T., Adsley, P., Brummer, J. W., Buthelezi, E. Z., Cooper, G. R. J., Fearick, R. W., Förtsch, S. V., Fujita, H., Fujita, Y., Jingo, M., Kleinig, W., Kureba, C. O., & 14 othersKvasil, J., Latif, M., Li, K. C. W., Mira, J. P., Nemulodi, F., Papka, P., Pellegri, L., Pietralla, N., Richter, A., Sideras-Haddad, E., Smit, F. D., Steyn, G. F., Swartz, J. A. & Tamii, A., 2018, In: Physics Letters, Section B: Nuclear, Elementary Particle and High-Energy Physics. 776, p. 133-138 6 p.

  Research output: Contribution to journal › Article › peer-review
  16 Citations (Scopus)

• Deformation Monitoring of Lotsane Bridge Using Geodetic Method

  Mayunga, S. D. & Rabamasoka, T., Aug 2019, In: International Journal of Scientific Engineering and Research (IJSER). 7, 8, p. 21-27 7 p., 13081901.

  Research output: Contribution to journal › Article › peer-review

• Delay bounded multi-source multicast in software-defined networking

  Semong, T., Xie, K., Zhou, X., Singh, H. K. & Li, Z., Jan 21 2018, In: Electronics (Switzerland). 7, 1, 10.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  2 Citations (Scopus)

• Delineation of potential groundwater recharge zones using analytic hierarchy process-guided GIS in the semi-arid Motloutse watershed, eastern Botswana

  Lentswe, G. B. & Molwalefhe, L., Apr 2020, In: Journal of Hydrology: Regional Studies. 28, 22 p., 100674.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  17 Citations (Scopus)

• Demand and Unmet Needs of Contraception Among Sexually Active In-Union Women in Nigeria: Distribution, Associated Characteristics, Barriers, and Program Implications

  Fagbamigbe, A. F., Afolabi, R. F. & Idemudia, E. S., Feb 1 2018, In: SAGE Open. 8, 1

  Research output: Contribution to journal › Article › peer-review

  Open Access
  13 Citations (Scopus)

• Demystifying the factors associated with rural–urban gaps in severe acute malnutrition among under-five children in low- and middle-income countries: a decomposition analysis

  Fagbamigbe, A. F., Kandala, N. B. & Uthman, A. O., Dec 1 2020, In: Scientific Reports. 10, 1, 15 p., 11172.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  4 Citations (Scopus)

• Densification, hardness and tribological characteristics of MWCNTs reinforced Ti6Al4V compacts consolidated by spark plasma sintering

  Adegbenjo, A. O., Obadele, B. A. & Olubambi, P. A., Jun 15 2018, In: Journal of Alloys and Compounds. 749, p. 818-833 16 p.

  Research output: Contribution to journal › Article › peer-review
  25 Citations (Scopus)

• Densification, microstructure and mechanical properties of spark plasma sintered Ni-17%Cr binary alloys

  Babalola, B. J., Shongwe, M. B., Obadele, B. A. & Olubambi, P. A., Apr 6 2019, In: International Journal of Advanced Manufacturing Technology. 101, 5-8, p. 1573-1581 9 p.

  Research output: Contribution to journal › Article › peer-review
  8 Citations (Scopus)

• Densification and microstructures of hybrid sintering of titanium alloy

  Ayodele, O. O., Awotunde, M. A., Shongwe, M. B., Obadele, B. A., Babalola, B. J. & Olubambi, P. A., Jan 2020, In: Materials Today: Proceedings. In press, 4 p.

  Research output: Contribution to journal › Article › peer-review

• Densification mechanism and microstructural evolution in selective laser sintering of Al-12Si powders

  Olakanmi, E. O., Cochrane, R. F. & Dalgarno, K. W., Jan 1 2011, In: Journal of Materials Processing Technology. 211, 1, p. 113-121 9 p.

  Research output: Contribution to journal › Article › peer-review
  97 Citations (Scopus)

• Density-dependent ecosystem service delivery under shifting temperatures by dung beetles

  Gotcha, N., Cuthbert, R. N., Machekano, H. & Nyamukondiwa, C., Sep 25 2021, In: Science of the Total Environment. 807, 1, 150575.

  Research output: Contribution to journal › Article › peer-review

• Dependence of structural and optoelectronic properties on thickness of γ-cui thin films deposited by vacuum thermal evaporation

  Dintle, L. K., Luhanga, P. V. C., Moditswe, C. & Muiva, C. M., 2018, In: MRS Advances. 3, 42-43, p. 2627-2642 16 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Deployment of IoV for Smart Cities: Applications, Architecture and Challenges

  Ang, L. M., Seng, K. P., Ijemaru, G. & Zungeru, A. M., Dec 17 2018, In: IEEE Access. 19 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  42 Citations (Scopus)

• Deposition mechanism and microstructure of laser-assisted cold-sprayed (LACS) Al-12 wt.%Si coatings: Effects of laser power

  Olakanmi, E. O., Tlotleng, M., Meacock, C., Pityana, S. & Doyoyo, M., Jun 1 2013, In: JOM. 65, 6, p. 776-783 8 p.

  Research output: Contribution to journal › Article › peer-review
  17 Citations (Scopus)

• Derivation and validation of a pedotransfer function for estimating the bulk density of tropical forest soils

  Obidike-Ugwu, E. O., Ogunwole, J. O. & Eze, P. N., 2022, (Accepted/In press) In: Modeling Earth Systems and Environment.

  Research output: Contribution to journal › Article › peer-review

• Desiccation and temperature resistance of the larger grain borer, Prostephanus truncatus (Horn) (Coleoptera: Bostrichidae): pedestals for invasion success?

  Mutamiswa, R., Machekano, H., Singano, C., Joseph, V., Chidawanyika, F. & Nyamukondiwa, C., Mar 1 2021, In: Physiological Entomology. 46, 2, p. 157-166 10 p.

  Research output: Contribution to journal › Article › peer-review

• Design and Construction of an Automatic Triggered Bell Ringer Circuit

  Kelechi, I. G., Zungeru, A. M., Sandra, Y., Babarinde, A. K. & Oluwafemi, O. K., 2014, In: Innovative Systems Design and Engineering. 5, 12, p. 91-98 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Design and Construction of a Remote Controlled Power Supply Unit

  Ahmed, M. S., Zungeru, A. M. & Kolo, J. G., 2007, In: Leonardo Journal of Sciences. 11, p. 41-50

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Design and Development of an Ultrasonic Motion Detector

  Zungeru, A. M., 2013, In: International Journal of Security, Privacy and Trust Management (IJSPTM). 2, 1, p. 1-13 13 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Design and development of microcontroller based selective harmonic elimination technique for three phase voltage source inverter

  Ravi, S., Rajpriya, G. & Kumarakrishnan, V., Jan 1 2015, In: International Journal of Applied Engineering Research. 10, 13, p. 11562-11578 17 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Design and Implementation of A Directional Object Sensing and Ranging System

  Zungeru, A. M., Mahmood, I., Mmonyi, A. C. & Obikoya, G. D., 2014, In: Network and Complex Systems. 4, 8, p. 1-12 12 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Design and Implementation of a Generator Power Sensor and Shutdown Timer

  Obikoya, G. D., Zungeru, A. M., Mmonyi, A. C. & Hayatuddeen, T., 2014, In: Innovative Systems Design and Engineering. 5, 10, p. 1-6 6 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Design and Implementation of a GSM Based Scrolling Message Display Board

  Zungeru, A. M., Obikoya, G. D. & Uche, O. F., 2014, In: International Journal of Computational Science, Information Technology and Control Engineering (IJCSITCE). 1, 3, p. 21-31 11 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Design and implementation of a low cost digital bus passenger counter

  Zungeru, A. M., Deborah, M. K., Garba, A. J. & Tola, O. J., 2012, In: Innovative Systems Design and Engineering. 3, 4, p. 29-40 13 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Design and implementation of a microcontroller based buck boost converter as a smooth starter for permanent magnet motor

  Ravi, S., Mezhuyev, V., Iyswarya Annapoorani, K. & Sukumar, P., Mar 1 2016, In: Indonesian Journal of Electrical Engineering and Computer Science. 1, 3, p. 566-574 9 p.

  Research output: Contribution to journal › Article › peer-review
  10 Citations (Scopus)

• Design and implementation of a microcontroller based buck boost converter as a smooth starter for permanent magnet motor

  Ravi, S., Mezhuyev, V., Iyswarya Annapoorani, K. & Sukumar, P., Jan 1 2016, In: Telkomnika (Telecommunication Computing Electronics and Control). 1, 3, p. 566-574 9 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Design and implementation of a short message service (SMS) based remote controller

  Zungeru, A. M., Edu, U. V. & Garba, A. J., 2012, In: Computer Engineering and Intelligent Systems . 3, 4, p. 106-118 14 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Design and implementation of Bridgeless Cuk Converter for controlled BLDC motor

  Ahmed, S. F., Iyswarya Annapoorani, K. & Ravi, S., Jan 1 2016, In: International Journal of Control Theory and Applications. 9, 2, p. 821-832 12 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Design and implementation of security in healthcare cloud computing

  Gorata, M., Zungeru, A. M., Mangwala, M. & Chuma, J., 2017, In: Journal of Computer Science. 13, 2, p. 34-47 14 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  1 Citation (Scopus)

• Design and Modelling of a Solar Water Heating System

  Kelechi, I. G., Zungeru, A. M., Ayobami, O. E., Habibu, H. & Olugbenga, A. F., 2014, In: Industrial Engineering Letters. 4, 12, p. 70-79 10 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Design and Simulation of an Automated Motion Sensing Sprinkler System

  Thema, M., Zungeru, A. M., Gaboitaolelwe, J., Mtengi, B. & Lebekwe, C. K., 2020, In: International Journal of Engineering Research and Technology. 13, 11, p. 3167-3177 11 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Design and simulation of an automatic room heater control system

  Zungeru, A. M., Mangwala, M., Chuma, J., Gaebolae, B. & Basutli, B., 2018, In: Heliyon. 4, 6

  Research output: Contribution to journal › Article › peer-review

  Open Access
  10 Citations (Scopus)

• Design and simulation of an off-grid photovoltaic system with duty cycle prediction using neural network controller

  Zungeru, A. M., Duncan, D., Diarra, B., Chuma, J., Mosalaosi, M., Mtengi, B., Gaboitaolelwe, J. & Lebekwe, C., Nov 2021, In: International Journal of Engineering Research in Africa. 57, p. 181-210 30 p.

  Research output: Contribution to journal › Article › peer-review

• Design and simulation of autonomous anti-rain construction site cover system

  Molatlhegi, M. P., Zungeru, A. M., Gaboitaolelwe, J. & Lebekwe, C., 2020, In: International Journal of Engineering Research and Technology. 13, 10, p. 3000-3007 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Design and simulation of a weather activated window system

  Zungeru, A. M., Chuma, J., Mangwala, M. & Tlhabiwe, L. R., 2017, In: International Journal of Applied Engineering Research. 12, 20, p. 10189-10196 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  3 Citations (Scopus)

• Design and simulation of radio frequency based overheat alarm system

  Zungeru, A. M., Chuma, J., Mangwala, M. & Tito, P., Jan 1 2018, In: Journal of Engineering and Applied Sciences. 13, 21, p. 9022-9028 7 p.

  Research output: Contribution to journal › Article › peer-review

• Designing Effective Legends and Layouts with a Focus on Nigerian Topographic Maps

  Akinyemi, F. O., Kibora, P. M. & Aborishade, P., 2013, In: Cartographica. 48, 1, p. 1-12 12 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Designing of sampling programmes for industrial effluent monitoring

  Ntuli, F., Kuipa, P. K. & Muzenda, E., Jan 1 2011, In: Environmental Science and Pollution Research. 18, 3, p. 479-484 6 p.

  Research output: Contribution to journal › Article › peer-review
  9 Citations (Scopus)

• Design of a 30 nm Germanium FinFET by Parameter Optimization

  Mogosetso, G., Lebekwe, C. K. & Ditshego, N., Jan 17 2022, In: Advanced Engineering Forum. 44, p. 105-118 14 p.

  Research output: Contribution to journal › Article › peer-review

• Design of a GSM-Based Biometric Access Control System

  Habibu, H., Zungeru, A. M., Susan, A. A., Kelechi, I. G. & Oluwatosin, O. B., 2014, In: Control Theory and Informatics. 4, 8, p. 1-20 20 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Design of an elliptic function bandpass filter using a high dielectric ring resonator

  Chuma, J. M., Mar 2005, In: SAIEE Africa Research Journal. 96, 2, p. 117-120 4 p.

  Research output: Contribution to journal › Article › peer-review

• Design of a Smart Embedded Uninterrupted Power Supply System for Personal Computer

  Zungeru, A. M., Garba, A. J., Kolo, J. G., Ahmed, M. S. & Olumide, I., 2012, In: International Journal of Embedded Systems and Applications (IJESA). 2, 4, p. 1-19 19 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Design of Integrated Gasification Combined Cycle plant with Carbon Capture and Storage based on co-gasification of coal and biomass

  Maxim, V., Cormos, C. C. & Agachi, P. S., Jun 20 2011, In: Computer Aided Chemical Engineering. 29, p. 1904-1908 5 p.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)

• Design of intelligent self-tuning GA ANFIS temperature controller for plastic extrusion system

  Ravi, S., Sudha, M. & Balakrishnan, P. A., Nov 24 2011, In: Modelling and Simulation in Engineering. 2011, 101437.

  Research output: Contribution to journal › Article › peer-review
  41 Citations (Scopus)

• Design of optimal 2-d nongrid sparse arrays for medical ultrasound

  Diarra, B., Robini, M., Tortoli, P., Cachard, C. & Liebgott, H., Nov 4 2013, In: IEEE Transactions on Biomedical Engineering. 60, 11, p. 3093-3102 10 p., 6529099.

  Research output: Contribution to journal › Article › peer-review
  66 Citations (Scopus)

• Design of synthetic optimizing neuro fuzzy temperature controller for dual screw profile plastic extruder using labview

  Samikannu, R. & Poonamallie, B. A., 2011, In: Journal of Computer Science. 7, 5, p. 671-677 7 p.

  Research output: Contribution to journal › Article › peer-review
  10 Citations (Scopus)