Find Research outputs

Search results

• Conference article

  Models for infusion of pollutant species through engineered geocomposite media from destructed polyethylene membrane

  Agbenyeku, E. E. O. & Muzenda, E., 2018, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2018, NOV, p. 1203-1211 9 p.

  Research output: Contribution to journal › Conference article › peer-review

• Nutrient removal from wastewater through Bio augmentation

  Manyuchi, M. M., Mbohwa, C. & Muzenda, E., 2018, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2018, SEP, p. 2060-2065 6 p.

  Research output: Contribution to journal › Conference article › peer-review

• Optical properties of bimetallic (SrO-K₂O) nanofillers

  Ayeleru, O. O., Dlova, S., Ntuli, F., Kupolati, W. K. & Olubambi, P. A., 2019, In: Procedia Manufacturing. 30, p. 483-489 7 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  1 Citation (Scopus)

• Optical properties of co-sputtered copper-aluminium Films

  Sathiaraj, T. S., Kumar, S. & Devan, K. R. S., Dec 1 2004, In: Proceedings of SPIE - The International Society for Optical Engineering. 5509, p. 24-33 10 p., 03.

  Research output: Contribution to journal › Conference article › peer-review

• Optimization of biogas production from sewage sludge

  Belaid, M., Matheri, A. N., Lelosa, I. C., Muzenda, E. & Ramatsa, I., 2019, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2019, MAR, p. 1702-1709 8 p.

  Research output: Contribution to journal › Conference article › peer-review

• Performance analysis of MEA in anaerobic co-digestion using cow dung, poultry droppings and lawn grass

  Bambokela, J. E., Muzenda, E. & Belaid, M., 2018, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2018, JUL, p. 2184 1 p.

  Research output: Contribution to journal › Conference article › peer-review

• Photon-initiated charge transfer in iodide-pyrrole clusters: Direct detachment and dipole bound states

  Mbaiwa, F., Van Duzor, M., Wei, J. & Mabbs, R., Dec 24 2009, In: Journal of Physics: Conference Series. 194, 15, 152027.

  Research output: Contribution to journal › Conference article › peer-review

• Potential for re-refining of used lubricating oils for re-use using zinc dialkyl dithiosulphate as an additive

  Manyuchi, M. M., Nengiwa, T., Mbohwa, C., Muzenda, E. & Mpeta, M., 2018, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2018, NOV, p. 1357-1364 8 p.

  Research output: Contribution to journal › Conference article › peer-review

• Potential to produce biomass briquettes from brewery waste

  Manyuchi, M. M., Mbohwa, C., Muzenda, E. & Mpeta, M., 2019, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. July, p. 40-44 5 p.

  Research output: Contribution to journal › Conference article › peer-review

• Potential to produce biomass briquettes from tea waste

  Manyuchi, M. M., Mbohwa, C. & Muzenda, E., 2018, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2018, SEP, p. 129-132 4 p.

  Research output: Contribution to journal › Conference article › peer-review

• Processing and characterization of chalcopyrite (CuFeS₂) sample from Botswana

  Poloko, N., Danha, G. & Gaogane, T., 2019, In: Procedia Manufacturing. 35, p. 488-493 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  1 Citation (Scopus)

• Prospective synergy of biogas upgrading technologies with carbon capture and sequestration (CCS) techniques

  Bambokela, J. E., Muzenda, E. & Belaid, M., 2018, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2018, JUL, p. 3236-3249 14 p.

  Research output: Contribution to journal › Conference article › peer-review

• Reduction of anionic chemical contaminant infusion through engineered clayey medium

  Agbenyeku, E. E. O. & Muzenda, E., 2018, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2018, NOV, p. 1212-1220 9 p.

  Research output: Contribution to journal › Conference article › peer-review

• Remote sensing of the middle atmosphere with MIPAS

  Clarmann, T. V., Chidiezie Chineke, T., Fischer, H., Funke, B., García-Comas, M., Gil-López, S., Glatthor, N., Grabowski, U., Höpfner, M., Kellmann, S., Kiefer, M., Linden, A., López-Puertas, M., López-Valverde, M. A., Mengistu Tsidu, G., Milz, M., Steck, T. & Stiller, G. P., Dec 1 2002, In: Proceedings of SPIE - The International Society for Optical Engineering. 4882, p. 172-183 12 p.

  Research output: Contribution to journal › Conference article › peer-review
  29 Citations (Scopus)

• Resource recovery from corn residues through production of biogas and bio-hydrogen

  Manyuchi, M. M., Moyo, F., Mbohwa, C. & Muzenda, E., 2018, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2018, JUL, p. 2526-2529 4 p.

  Research output: Contribution to journal › Conference article › peer-review

• Resource recovery from paper mill sludge through vermicomposting

  Manyuchi, M. M., Mbohwa, C., Muzenda, E. & Stinner, W., 2019, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. July, p. 2227-2232 6 p.

  Research output: Contribution to journal › Conference article › peer-review

• Review of dual axis solar tracking and development of its functional model

  Mpodi, E. K., Tjiparuro, Z. & Matsebe, O., 2019, In: Procedia Manufacturing. 35, p. 580-588 9 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  6 Citations (Scopus)

• Rheology and Fluid Mechanics of nonlinear materials

  Siginer, D. A. & Bakhtiyarov, S. I., Dec 1 2004, In: American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED. 260, 1 p.

  Research output: Contribution to journal › Conference article › peer-review

• Rheology and Fluid Mechanics of Nonlinear Materials: Introduction

  Siginer, D. A. & Bakhtiyarov, S. I., Jan 1 2003, In: American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED. 259, 1 p.

  Research output: Contribution to journal › Conference article › peer-review

• Root cause analysis for fuel losses in bulk oil storage tanks

  Gwangwava, N., Motlhabane, T., Addo-Tenkorang, R., Ogunmuyiwa, E. N., Ude, A. U. & Goriwondo, W. M., 2018, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2018, NOV, p. 333-345 13 p.

  Research output: Contribution to journal › Conference article › peer-review

• Silicon and aluminium leaching kinetics from acidic gold mine tailings

  Falayi, T., Mashifana, T. & Ntuli, F., Oct 29 2019, In: IOP Conference Series: Materials Science and Engineering. 652, 1, 8 p., 12046.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  1 Citation (Scopus)

• Situational analysis for producing biomass charcoal briquettes in Zimbabwe

  Manyuchi, M. M., Mahofa, E., Fungura, A., Mbohwa, C., Muzenda, E. & Mpeta, M., 2018, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2018, NOV, p. 1365-1372 8 p.

  Research output: Contribution to journal › Conference article › peer-review
  1 Citation (Scopus)

• Solid fuel production from landfill waste for promoting sustainable development in Africa

  Manyuchi, M. M., Mbohwa, C. & Muzenda, E., 2018, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2018, SEP, p. 2140-2144 5 p.

  Research output: Contribution to journal › Conference article › peer-review

• Spark plasma consolidation and wear behaviour of nanoceramic addition into titanium alloy

  Falodun, O. E., Obadele, B. A., Oke, S. R., Akinwamide, O. S. & Olubambi, P. A., Jan 1 2019, In: Materials Today: Proceedings. 18, p. 2234-2241 8 p.

  Research output: Contribution to journal › Conference article › peer-review

• Spark plasma sintered Ti6Al4V-ZrO2 bio-composites: Optimization of ball milling and turbula mixing of powders and their subsequent sintering parameters

  Moshokoa, N. A., Mukhudwana, T. V., Raganya, L. M., Lekgoathi, J. I., Obadele, B. A. & Olubambi, P. A., Oct 2 2018, In: IOP Conference Series: Materials Science and Engineering. 430, 1, 012035.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Stepping valve actuator algorithm for a CamleSs IC engine

  Zibani, I., Marumo, R., Chuma, J., Ngebani, I. & Tsamaase, K., 2019, In: Procedia Manufacturing. 33, p. 99-106 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Studies on Mechanical properties of graphite reinforced Ti (Cx, N1-x) using nanoindentation techniques

  Akinribide, O. J., Mekgwe, G. N., Ajibola, O. O., Obadele, B. A., Akinwamide, S. O. & Olubambi, P. A., Jan 1 2019, In: Procedia Manufacturing. 30, p. 604-610 7 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  2 Citations (Scopus)

• Substrate effect on the morphology, structural and tribology properties of Titanium carbide thin film grown by RF Magnetron Sputtering

  Abegunde, O., Akinlabi, E. T. & Oladijo, P., Dec 18 2019, In: Journal of Physics: Conference Series. 1378, 2, 022033.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Sulphate removal from acid rock drainage using steel slag

  Ntuli, F. & Magwa, N. P., Nov 5 2018, In: IOP Conference Series: Earth and Environmental Science. 191, 1, 6 p., 012116.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  1 Citation (Scopus)

• Surface characterisation and surface energy measurements on Boron phosphide films prepared by PECVD

  Ogwu, A., Hellwig, T., Doherty, S., Haddow, D., Möllmann, K. P. & Placido, F., 2005, In: Proceedings of SPIE - The International Society for Optical Engineering. 5786, p. 130-136 7 p., 14.

  Research output: Contribution to journal › Conference article › peer-review
  7 Citations (Scopus)

• Surface integrity of TiC thin film produced by RF magnetron sputtering

  Abegunde Olayinka, O., Esther, A., Oladijo, O. P. & Majumdar, J. D., 2019, In: Procedia Manufacturing. 35, p. 950-955 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  3 Citations (Scopus)

• Synthesis and characterization of SnO₂ nanofiller from recycled expanded polystyrene

  Ayeleru, O. O., Dlova, S., Ntuli, F., Kupolati, W. K. & Olubambi, P. A., 2019, In: Procedia Manufacturing. 30, p. 635-641 7 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  2 Citations (Scopus)

• Synthesis of Ti-6Al-4V alloy with nano-TiN microstructure via spark plasma sintering technique

  Falodun, O. E., Obadele, B. A., Oke, S. R., Maja, M. E. & Olubambi, P. A., Dec 21 2017, In: IOP Conference Series: Materials Science and Engineering. 272, 1, 012029.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  12 Citations (Scopus)

• Techno economic assessment for setting up a viable biogas plant at a local landfill in South Africa

  Manyuchi, M. M., Mbohwa, C., Muzenda, E. & Masebinu, S., 2017, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2017, JUL, p. 159-165 7 p.

  Research output: Contribution to journal › Conference article › peer-review
  1 Citation (Scopus)

• The Africa Millimetre Telescope

  Backes, M., Müller, C., Conway, J. E., Deane, R. P., Evans, R., Falcke, H., Fraga-Encinas, R., Goddi, C., Krichbaum, T. P., Klein Wolt, M., MacLeod, G., Ribeiro, V. A. R. M., Roelofs, F., Shen, Z. Q. & Van Langevelde, H. J., 2016, In: Proceedings of Science. 2016-January, 029.

  Research output: Contribution to journal › Conference article › peer-review

• The effect of a sulphate-reducing bacteria on the rate of corrosion of steel alloys

  Shaku, L., Danha, G., Hlabangana, N. & Bhero, S., 2019, In: Procedia Manufacturing. 35, p. 513-521 9 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• The evolution of nova shells

  Tappert, C., Arancibia, E., Schmidtobreick, L., Vogt, N., Ederoclite, A., Vučković, M. & Ribeiro, V. A. R. M., 2017, In: Proceedings of Science. 315

  Research output: Contribution to journal › Conference article › peer-review

• The microstructural and mechanical characterization of the β-type Ti-11.1Mo-10.8Nb alloy for biomedical applications

  Raganya, M. L., Moshokoa, N. M., Obadele, B., Olubambi, P. A. & Machaka, R., Nov 8 2019, In: IOP Conference Series: Materials Science and Engineering. 655, 1, 012025.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  5 Citations (Scopus)

• The novel use of calcium sulphate dihydrate as a bleaching agent for pre-processing beef tallow in the soap manufacturing process

  Chakawa, D. P., Nkala, M., Hlabangana, N. & Muzenda, E., 2019, In: Procedia Manufacturing. 35, p. 911-916 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  1 Citation (Scopus)

• Thermal Diffusivity Behaviour of Multi-walled Carbon Nanotube Reinforced Ti6Al4V Metal Matrix Composites

  Adegbenjo, A., Obadele, B., Olubambi, P., Shongwe, M. & Adejuwon, S., Apr 3 2019, In: IOP Conference Series: Materials Science and Engineering. 499, 1, 012010.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Thermally sprayed Inconel 625 coating on 304 stainless steel: A neutron diffraction stress analysis

  Oladijo, O. P., Luzin, V. & Ntsoane, T. P., 2019, In: Procedia Manufacturing. 35, p. 1234-1239 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  5 Citations (Scopus)

• Thermal radio emission from novae and symbiotics with the Square Kilometre Array

  O'Brien, T., Rupen, M., Chomiuk, L., Ribeiro, V., Bode, M., Sokoloski, J. & Woudt, P., Jan 1 2014, In: Proceedings of Science. 9-13-June-2014, 062.

  Research output: Contribution to journal › Conference article › peer-review

• The sliding wear resistance and frictional characteristics of surface modified aluminium alloys under extreme pressure

  Dearnley, P. A., Gummersbach, J., Weiss, H., Ogwu, A. A. & Davies, T. J., Apr 1999, In: Wear. 225-229, I, p. 127-134 8 p.

  Research output: Contribution to journal › Conference article › peer-review
  88 Citations (Scopus)

• The socio-economic implication of 2^nd generation biofuels in Southern Africa: A critical review

  Charis, G., Danha, G. & Muzenda, E., 2018, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2018, NOV, p. 1373-1385 13 p.

  Research output: Contribution to journal › Conference article › peer-review
  3 Citations (Scopus)

• The use of calcium sulphate dihydrate (CaSO₄.2H₂O) as a bleaching agent for crude soya bean vegetable oil

  Chakawa, D. P., Nkala, M., Hlabangana, N. & Muzenda, E., 2019, In: Procedia Manufacturing. 35, p. 802-807 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  2 Citations (Scopus)

• Thin films in tribology

  Phiri, R. R., Philip Oladijo, O. & Akinlabi, E. T., 2018, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2018, NOV, p. 140-146 7 p.

  Research output: Contribution to journal › Conference article › peer-review
  1 Citation (Scopus)

• Treatment of Sulphate Rich Process Effluents using Coal Fly Ash

  Lekgoba, T., Ntuli, F. & Mosweu, B., Mar 10 2021, In: E3S Web of Conferences. 241, 01002.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Tribological behaviour of ductile and austempered grey cast iron under dry environment

  Akinribide, O. J., Akinwamide, S. O., Obadele, B. A., Ogundare, O. D., Ayeleru, O. O. & Olubambi, P. A., 2019, In: Materials Today: Proceedings. 38, p. 1174-1182 9 p.

  Research output: Contribution to journal › Conference article › peer-review

• Tungsten carbide thin films Review: Effect of deposition parameters on film microstructure and properties

  Phiri, R. R., Oladijo, O. P. & Akinlabi, E. T., 2019, In: Procedia Manufacturing. 35, p. 522-528 7 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Use of coal fly ash to manufacture a corrosion resistant brick

  Moyo, V., Mguni, N. G., Hlabangana, N. & Danha, G., 2019, In: Procedia Manufacturing. 35, p. 500-512 13 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  2 Citations (Scopus)