Find Research outputs

Search results

• Commissioned report

  Crash and Authenticated Byzantine Fault Tolerance: A Fail Signaling Approach

  Mpoeleng, D., 2005

  Research output: Book/Report › Commissioned report

  Open Access

• Financial liberalisation and banking crises in sub-Saharan Africa

  Gamariel, G., 2013, Energy Research Institute, University of Cape Town.

  Research output: Book/Report › Commissioned report

• From crash tolerance to Byzantine tolerance : fail signalling dependable distributed systems

  Mpoeleng, D., 2005, University of Newcastle Upon Tyne, UK.

  Research output: Book/Report › Commissioned report

• Galloping Transmission Lines

  Kaisara, T., 2008

  Research output: Book/Report › Commissioned report

• Manual for the Fluid Mechanics and Heat Transfer Laboratory

  Dennis, S., 1989, ASME Student Chapter. 100 p.

  Research output: Book/Report › Commissioned report

• Petrologie der Rahmengesteine der Pb-Zn-Lagerstätte Schneeberg, Südtirol. Master-thesis, Universität Innsbruck

  Proyer, A., 1989

  Research output: Book/Report › Commissioned report

• Robust Discriminant Analysis With Asymmetric Classes

  Ndwapi, N., 2018

  Research output: Book/Report › Commissioned report

• SIQXC: Schema Independent Queryable XML Compression for Smartphones

  Dinakenyane, O. & North, S., 2014, University of Sheffield.

  Research output: Book/Report › Commissioned report

• Spatio-temporal variability of macroinvertebrate diversity in the Okavango Delta: relationships with hydrochemistry

  MAZEBEDI, RICHARD., 2009, MPhil Thesis. Harry Oppenheimer Research Centre. University of Botswana.

  Research output: Book/Report › Commissioned report

• Water and Wastewater Management in Local Government: Skills Needs and Development

  Ochieng, A., Onyango, M. S., Thokozani, M., Esmail, S., Leswifi, T., Sophia, R. & John, K., 2015, 127 p.

  Research output: Book/Report › Commissioned report

  Open Access
• Conference article

  A computational feasibility study of failure-tolerant path planning

  Jamisola, R. S., Maciejewski, A. A. & Roberts, R. G., Jul 19 2004, In: Conference on Robotics and Remote Systems- Proceedings. 10, p. 233-239 7 p.

  Research output: Contribution to journal › Conference article › peer-review

• A correlation between nano and micro-hardness properties of TiN nanoparticles strengthened SAF 2205

  Mphahlele, M. R., Oke, S. R., Ige, O. O., Falodun, O. E., Obadele, B. A., Olubambi, P. A. & Shongwe, M. B., Apr 3 2019, In: IOP Conference Series: Materials Science and Engineering. 499, 1, 012009.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Adoption of eco cook stoves as a way of improving energy efficiency

  Manyuchi, M. M., Mbohwa, C., Muzenda, E. & Mpeta, M., 2019, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. July, p. 35-39 5 p.

  Research output: Contribution to journal › Conference article › peer-review

• Adsorption of Al, Cr and Zn from a wastewater effluent using basic oxygen furnace slag

  Ntuli, F. & Falayi, T., Nov 5 2018, In: IOP Conference Series: Earth and Environmental Science. 191, 1, 012112.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Advanced animal track-&-trace supply-chain conceptual framework: An internet of things approach

  Addo-Tenkorang, R., Gwangwava, N., Ogunmuyiwa, E. N. & Ude, A. U., 2019, In: Procedia Manufacturing. 30, p. 56-63 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  5 Citations (Scopus)

• American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED: Foreword

  Siginer, D. A. & Bakhtiyarov, S. I., Dec 1 2000, In: American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED. 255

  Research output: Contribution to journal › Conference article › peer-review

• Anaerobic digestion of kitchen and sewage sludge bio waste to biogas using engineered bio catalysis

  Manyuchi, M. M., Mbohwa, C., Mpeta, M. & Muzenda, E., 2019, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2019, MAR, p. 1-7 7 p.

  Research output: Contribution to journal › Conference article › peer-review
  1 Citation (Scopus)

• Application of Hycura in municipal waste digestion recovering biogas

  Manyuchi, M. M., Mbohwa, C., Muzenda, E. & Masebinu, S., 2017, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2017, JUL, p. 153-157 5 p.

  Research output: Contribution to journal › Conference article › peer-review
  1 Citation (Scopus)

• A preliminary application of a machine learning model for the prediction of the load variation in three-point bending tests based on acoustic emission signals

  Kaklis, K., Saubi, O., Jamisola, R. & Agioutantis, Z., 2021, In: Procedia Structural Integrity. 33, C, p. 251-258 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• A review of ironmaking by direct reduction processes: Quality requirements and sustainability

  Ramakgala, C. & Danha, G., 2019, In: Procedia Manufacturing. 35, p. 242-245 4 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  7 Citations (Scopus)

• A review of the application of GIS in biomass and solid waste supply chain optimization: Gaps and opportunities for developing nations

  Charis, G., Danha, G. & Muzenda, E., 2018, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2018, NOV, p. 42-52 11 p.

  Research output: Contribution to journal › Conference article › peer-review
  1 Citation (Scopus)

• A review of the desulphurization methods used for pyrolysis oil

  Serefentse, R., Ruwona, W., Danha, G. & Muzenda, E., 2019, In: Procedia Manufacturing. 35, p. 762-768 7 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  6 Citations (Scopus)

• A review of timber waste utilization: Challenges and opportunities in Zimbabwe

  Charis, G., Danha, G. & Muzenda, E., 2019, In: Procedia Manufacturing. 35, p. 419-429 11 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  6 Citations (Scopus)

• A review on material and energy recovery from waste tyres

  Ruwona, W., Danha, G. & Muzenda, E., 2019, In: Procedia Manufacturing. 35, p. 216-222 7 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  10 Citations (Scopus)

• A systematic review of magnetron sputtering of AlN thin films for extreme condition sensing

  Mwema, F. M., Akinlabi, E. T. & Oladijo, O. P., 2020, In: Materials Today: Proceedings. 26, Part 2, p. 1546-1550 5 p.

  Research output: Contribution to journal › Conference article › peer-review
  2 Citations (Scopus)

• Attenuation potency of mineral liner to cationic migration

  Agbenyeku, E. E. & Muzenda, E., 2019, In: Procedia Manufacturing. 35, p. 941-949 9 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Biochemical methane potential analysis using cow dung, chicken manure and pig manure under mesophilic conditions

  Belaid, M., Matheri, A. N., Mdluli, N. P. & Muzenda, E., 2019, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2019, MAR, p. 1710-1718 9 p.

  Research output: Contribution to journal › Conference article › peer-review

• Bioethanol production from corn residue

  Manyuchi, M. M., Muganu, C., Mbohwa, C. & Muzenda, E., 2018, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2018, JUL, p. 2530-2539 10 p.

  Research output: Contribution to journal › Conference article › peer-review
  1 Citation (Scopus)

• Bio ethanol production from the landfill organic waste fraction

  Manyuchi, M. M., Mbohwa, C. & Muzenda, E., 2018, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2018, JUL, p. 1-5 5 p.

  Research output: Contribution to journal › Conference article › peer-review

• Biogas and Bio solids production from tea waste through anaerobic digestion

  Manyuchi, M. M., Mbohwa, C. & Muzenda, E., 2018, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2018, JUL, p. 2519-2525 7 p.

  Research output: Contribution to journal › Conference article › peer-review

• Bio methane enrichment of landfill waste biogas

  Manyuchi, M. M., Mbohwa, C., Muzenda, E. & Masebinu, S., 2017, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2017, JUL, p. 183-188 6 p.

  Research output: Contribution to journal › Conference article › peer-review
  2 Citations (Scopus)

• Bio stabilization of Jatropha Curcas cake to bio fertilizers through vermicomposting

  Manyuchi, M. M., Mbohwa, C. & Muzenda, E., 2018, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2018, JUL, p. 9-13 5 p.

  Research output: Contribution to journal › Conference article › peer-review
  1 Citation (Scopus)

• Bio treatment of Brewery Wastewater treatment using Hycura

  Manyuchi, M. M., Mbohwa, C. & Muzenda, E., 2018, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2018, SEP, p. 2641-2647 7 p.

  Research output: Contribution to journal › Conference article › peer-review

• Comparative study of spark plasma sintering features on the densification of Ni-Cr binary alloys

  Babalola, B. J., Shongwe, M. B., Obadele, B. A., Olubambi, P. A., Ayodele, O. O., Rominiyi, A. L. & Jeje, S. O., Dec 10 2018, In: MATEC Web of Conferences. 249, 01004.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  12 Citations (Scopus)

• Conditioned upshots of permeation rates as a function of vadose zone effect in engineered landfill clayey medium

  Agbenyeku, E. E. O. & Muzenda, E., 2018, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2018, NOV, p. 1278-1286 9 p.

  Research output: Contribution to journal › Conference article › peer-review

• Conductor disc used to suppress spurious mode and enhance electric coupling in a dielectric loaded combline resonator

  Pholele, T. M. & Chuma, J. M., Apr 20 2016, In: IOP Conference Series: Materials Science and Engineering. 120, 1, 012017.

  Research output: Contribution to journal › Conference article › peer-review

• Control Unit for a Coreless Stator for use with SI Engine Stepping Valve

  Zibani, I., Marumo, R., Chuma, J., Ngebani, I. & Tsamaase, K., 2018, In: Procedia Manufacturing. 21, p. 397-404 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Corrosion behavior of ductile and austempered ductile cast iron in 0.01M and 0.05M NaCl Environments.

  Akinribide, O. J., Akinwamide, S. O., Ajibola, O. O., Obadele, B. A., Olusunle, S. O. O. & Olubambi, P. A., Jan 1 2019, In: Procedia Manufacturing. 30, p. 167-172 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  2 Citations (Scopus)

• Corrosion behaviour of Al-Fe-Ti-V medium entropy alloy

  Bodunrin, M. O., Obadele, B. A., Chown, L. H. & Olubambi, P. A., Dec 21 2017, In: IOP Conference Series: Materials Science and Engineering. 272, 1, 012028.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  1 Citation (Scopus)

• Corrosion resistance potential of boron phosphide films in a naval environment

  Haddow, D., Ogwu, A. A. & Placido, F., 2003, In: Proceedings of SPIE - The International Society for Optical Engineering. 5078, p. 109-120 12 p.

  Research output: Contribution to journal › Conference article › peer-review
  4 Citations (Scopus)

• Defect formation and surface evolution of thin film materials

  Phiri, R. R., Philip Oladijo, O. & Akinlabi, E. T., 2018, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2018, NOV, p. 1087-1093 7 p.

  Research output: Contribution to journal › Conference article › peer-review
  1 Citation (Scopus)

• Densification and tensile properties of titanium grade 4 produced using different routes

  Masikane, M. A., Johnson, O. T., Ogunmuyiwa, E. N. & Sigalas, I., 2019, In: Procedia Manufacturing. 35, p. 826-832 7 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  1 Citation (Scopus)

• Dependence of fractal characteristics on the scan size of atomic force microscopy (AFM) phase imaging of aluminum thin films

  Mwema, F. M., Akinlabi, E. T. & Oladijo, O. P., 2020, In: Materials Today: Proceedings. 26, Part 2, p. 1540-1545 6 p.

  Research output: Contribution to journal › Conference article › peer-review
  2 Citations (Scopus)

• Design of a new front-end electronics test-bench for the upgraded ATLAS detector's Tile Calorimeter

  Kureba, C. O., Govender, M., Hofsajer, I., Ruan, X., Sandrock, C. & Spoor, M., Oct 15 2015, In: Journal of Physics: Conference Series. 645, 1, 012020.

  Research output: Contribution to journal › Conference article › peer-review
  1 Citation (Scopus)

• Design of a photovoltaic system with ultracapacitor energy buffer

  Diarra, B., Zungeru, A. M., Ravi, S., Chuma, J., Basutli, B. & Zibani, I., Jan 1 2019, In: Procedia Manufacturing. 33, p. 216-223 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  3 Citations (Scopus)

• Developing an empirical relationship for optimizing surface roughness of TiC thin film grown by magnetron sputtering using Taguchi analysis

  Abegunde, O., Akinlabi, E. & Oladijo, P., 2020, In: Materials Today: Proceedings. 26, Part 2, p. 3282-3287 6 p.

  Research output: Contribution to journal › Conference article › peer-review

• Development and size distribution of polystyrene/ZnO nanofillers

  Ayeleru, O. O., Dlova, S., Ntuli, F., Kupolati, W. K. & Olubambi, P. A., 2019, In: Procedia Manufacturing. 30, p. 194-199 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  2 Citations (Scopus)

• Development of composite proton exchange membrane from polystyrene butadiene rubber and carbon nanoballs for fuel cell application

  Abdulkareem, A. S., Afolabi, A. S., Idibie, C. A., Iyuke, S. E. & Pienaar, H. C. VZ., Mar 22 2012, In: Energy Procedia. 14, p. 2026-2037 12 p.

  Research output: Contribution to journal › Conference article › peer-review
  3 Citations (Scopus)

• Development of MgAl₂O₄ grain refiner in Al in-situ composite through H₃BO₃ addition

  Chandramohan, P., Olubambi, P. A., Raghu, R. & Obadele, B. A., Nov 8 2019, In: IOP Conference Series: Materials Science and Engineering. 655, 1, 012039.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Effect of Coating Thickness on Wear Performance of Inconel 625 coating

  Phiri, R. R., Oladijo, O. P., Maledi, N. & Akinlabi, E. T., Nov 6 2018, In: IOP Conference Series: Materials Science and Engineering. 423, 1, 012159.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  6 Citations (Scopus)