Find Research Outputs

Search in all content

Filters for Research Output

Search concepts
Selected filters

Publication Year

  • 2020
  • 2019
  • 2018
  • 2017
  • 2016

Effect of pulp chemistry and solids on a froth bubble size measurement method

Bhondayi, C., Moys, M. H. & Danha, G., Sep 1 2016, In : Powder Technology. 297, p. 202-210 9 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Effect of sintering parameters on densification and microstructural evolution of nano-sized titanium nitride reinforced titanium alloys

Falodun, O. E., Obadele, B. A., Oke, S. R., Maja, M. E. & Olubambi, P. A., Mar 5 2018, In : Journal of Alloys and Compounds. 736, p. 202-210 9 p.

Research output: Contribution to journalArticle

29 Citations (Scopus)

Effect of starting powder particle size and heating rate on spark plasma sintering of Fe-Ni alloys

Shongwe, M. B., Ramakokovhu, M. M., Diouf, S., Durowoju, M. O., Obadele, B. A., Sule, R., Lethabane, M. L. & Olubambi, P. A., Sep 5 2016, In : Journal of Alloys and Compounds. 678, p. 241-248 8 p.

Research output: Contribution to journalArticle

34 Citations (Scopus)

Effect of substrate moisture on the weatherability of surface treatment for High-Performance Concrete (HPC)

Bader, T., Unterberger, S. H. & Lackner, R., 2017, In : Cement and Concrete Composites. 83, p. 57-65 9 p.

Research output: Contribution to journalArticle

Open Access
3 Citations (Scopus)

Effect of subthreshold slope on the sensitivity of nanoribbon sensors

Sun, K., Zeimpekis, I., Hu, C., Ditshego, N. M. J., Thomas, O., De Planque, M. R. R., Chong, H. M. H., Morgan, H. & Ashburn, P., Jun 3 2016, In : Nanotechnology. 27, 28, 285501.

Research output: Contribution to journalArticle

10 Citations (Scopus)

Effect of Supertargeting and Non Isothermal Stream Mixing in Heat Exchanger Network Design Using Modified Pinch Analysis

Azeez, O., Blessing, O., Onyinye, E. & Hassan, A., May 2019, In : International Journal of Energy and Environmental Science. 4, 1, p. 18-26 9 p.

Research output: Contribution to journalArticle

Open Access
6 Citations (Scopus)

Effect of Thermal & Alkali Treatment on Pterocarpus Angolensis (Mukwa) Wood Flour

Setswalo, K., Namoshe, M., Kutua, S., Oladijo, O. P. & Samson, B., Jan 1 2017, In : Procedia Manufacturing. 7, p. 205-210 6 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Effect of TiN addition on corrosion behavior of spark plasma sintered 304L austenitic stainless steel in chloride media

Olukayode Akinwamide, S., Jeremiah Akinribide, O., Mafafo, M., Phumlani, M., Abiodun Obadele, B., Tolulope Abe, B. & Apata Olubambi, P., Nov 2019, In : Materials Today: Proceedings.

Research output: Contribution to journalArticle

Effect of TiN and TiCN additions on spark plasma sintered Ti–6Al–4V

Falodun, O. E., Obadele, B. A., Oke, S. R., Ige, O. O. & Olubambi, P. A., Jan 1 2018, (Accepted/In press) In : Particulate Science and Technology.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Effect of titanium addition on the microstructure, electrical conductivity and mechanical properties of copper by using SPS for the preparation of Cu-Ti alloys

Eze, A. A., Jamiru, T., Sadiku, E. R., Durowoju, M. Ọ., Kupolati, W. K., Ibrahim, I. D., Obadele, B. A., Olubambi, P. A. & Diouf, S., Mar 2018, In : Journal of Alloys and Compounds. 736, p. 163-171 9 p.

Research output: Contribution to journalArticle

14 Citations (Scopus)

Effects of biomass/coal copyrolysis parameters on the product yield: A review

Thibanyane, N., Agachi, P. & Danha, G., 2019, In : Procedia Manufacturing. 35, p. 477-487 11 p.

Research output: Contribution to journalConference article

Open Access

Effects of Daniella oliveri Wood Flour Characteristics on the Processing and Functional Properties of Wood Polymer Composites

Olakanmi, E. O., Thompson, O. M., Vunain, E., Doyoyo, M. & Meijboom, R., Jun 10 2016, In : Materials and Manufacturing Processes. 31, 8, p. 1073-1084 12 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Effects of homogenous–heterogeneous reactions on radiative NACL-CNP nanofluid flow past a convectively heated vertical riga plate

Nayak, M. K., Shaw, S., Makinde, O. D. & Chamkha, A. J., Jan 1 2018, In : Journal of Nanofluids. 7, 4, p. 657-667 11 p.

Research output: Contribution to journalArticle

18 Citations (Scopus)

Effects of Mo content on the microstructural and mechanical properties of as-cast Ti-Mo alloys

Moshokoa, N., Raganya, L., Obadele, B., Olubambi, P. & Machaka, R., Nov 8 2019, In : IOP Conference Series: Materials Science and Engineering. 655, 1, 012015.

Research output: Contribution to journalConference article

Open Access
1 Citation (Scopus)

Effects of neutron radiation on the optical and structural properties of blue and green emitting plastic scintillators

Baranov, V., Davydov, Y. I., Erasmus, R., Kureba, C. O., Lekalakala, N., Masuku, T., Mdhluli, J. E., Mellado, B., Mokgatitswane, G., Sideras-Haddad, E., Vasilyev, I. & Zhmurin, P. N., Dec 1 2018, In : Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms. 436, p. 236-243 8 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Effects of slip on nonlinear convection in nanofluid flow on stretching surfaces

Shaw, S., Kameswaran, P. K. & Sibanda, P., Dec 1 2016, In : Boundary Value Problems. 2016, 1, p. 1-11 11 p., 2.

Research output: Contribution to journalArticle

29 Citations (Scopus)

Effects of temperature and rainfall in plant–herbivore interactions at different altitude

Asfaw, M. D., Kassa, S. M., Lungu, E. & Bewket, W., Aug 2019, In : Ecological Modelling. 406, p. 50 - 59

Research output: Contribution to journalArticle

36 Citations (Scopus)

Efficiency of waste clinker ash and iron oxide tailings for phosphorus removal from tertiary wastewater: Batch studies

Sima, T. V., Letshwenyo, M. W. & Lebogang, L., 2018, In : Environmental Technology and Innovation. 11, p. 49-63 15 p.

Research output: Contribution to journalArticle

10 Citations (Scopus)

Eidps: An efficient approach to protect the network and intrusion prevention

Selvaraj, R., Kuthadi, V. M. & Marwala, T., Jan 1 2016, Information Systems Design and Intelligent Applications - Proceedings of 3rd International Conference, INDIA 2016. Satapathy, S. C., Mandal, J. K., Udgata, S. K. & Bhateja, V. (eds.). Springer Verlag, p. 35-47 13 p. (Advances in Intelligent Systems and Computing; vol. 434).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Elastoviscoplastic Fluid Flow in Non-Circular Tubes: Transversal Field and Interplay of Elasticity and Plasticity

Letelier, M. F., Barrera, C., Gonzalez, A. & Dennis, S., 2016, In : Applied Mathematical Modelling.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)

Elasto-viscoplastic fluid flow in tubes of arbitrary cross-section

Letelier, M. F., Siginer, D. A. & González, A., 2017, In : Applied Mathematical Modelling. 46, p. 572-580 9 p.

Research output: Contribution to journalArticle

Open Access
5 Citations (Scopus)

eLearning hands-on: blending interactive eLearning with practical engineering laboratory

Kiravu, C., Yanev, K. M., Tunde, M. O., Jeffrey, A. M., Schoenian, D. & Renner, A., 2016, In : International Journal of Information and Learning Technology. 33, 5, p. 278-299 22 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Electrochemical characteristic of cathodically protected mild steel in 3.5% Nacl and 1 M H 2 SO 4

Tladi, M. N. A., Maloma, R., Obadele, B. A. & Olubambi, P. A., Apr 17 2018, 2018 IEEE 9th International Conference on Mechanical and Intelligent Manufacturing Technologies, ICMIMT 2018. Institute of Electrical and Electronics Engineers Inc., p. 91-94 4 p. (2018 IEEE 9th International Conference on Mechanical and Intelligent Manufacturing Technologies, ICMIMT 2018; vol. 2018-January).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Electrochemical Characteristics of Cathodically Protected 2205 Duplex Stainless Steel in Saline Environment

Tladi, M. N. A., Obadele, B. A. & Olubambi, P. A., Oct 1 2019, In : Journal of Failure Analysis and Prevention. 19, 5, p. 1428-1438 11 p.

Research output: Contribution to journalArticle

Electrochemical flow-ELISA for rapid and sensitive determination of microcystin-LR using automated sequential injection system

Lebogang, L., Jantra, J., Hedström, M. & Mattiasson, B., 2017, In : Sensors. 17, 7

Research output: Contribution to journalArticle

5 Citations (Scopus)

Electrochemical study of calcareous deposit formation in simulated soil solution under cathodic protection

Phumlani, M., Philippe, R., Babatunde, O., Marc, J. & Peter, O., 2019, Key Engineering Materials. Trans Tech Publications Ltd, p. 307-312 6 p. (Key Engineering Materials; vol. 821 KEM).

Research output: Chapter in Book/Report/Conference proceedingChapter

Electrolytic deposition of manganese dioxide from Nigerian manganese ore using graphite electrodes

Muriana, R. A., Omeye, L. U., Abubakre, O. K., Muzenda, E., Ndlovu, S. & Abdulkareem, A. S., 2017. 6 p.

Research output: Contribution to conferencePaper

Open Access

Electronegative (3+1)-dimensional modulated excitations in plasmas

Tabi, C. B., Panguetna, C. S. & Kofané, T. C., Sep 15 2018, In : Physica B: Condensed Matter. 545, p. 370-376 7 p.

Research output: Contribution to journalArticle

Open Access
3 Citations (Scopus)

Electronegative nonlinear oscillating modes in plasmas

Panguetna, C. S., Tabi, C. B. & Kofané, T. C., Feb 1 2018, In : Communications in Nonlinear Science and Numerical Simulation. 55, p. 326-337 12 p.

Research output: Contribution to journalArticle

Open Access
14 Citations (Scopus)

Electroosmosis modulated peristaltic biorheological flow through an asymmetric microchannel: mathematical model

Tripathi, D., Jhorar, R., Anwar Bég, O. & Shaw, S., Jun 1 2018, In : Meccanica. 53, 8, p. 2079-2090 12 p.

Research output: Contribution to journalArticle

Open Access
15 Citations (Scopus)
3 Citations (Scopus)
Open Access
3 Citations (Scopus)

Energy changes during use of high-power ultrasound on food grade surfaces

Mamvura, T. A., Iyuke, S. E. & Paterson, A. E., Jun 2018, In : South African Journal of Chemical Engineering. 25, p. 62-73 12 p.

Research output: Contribution to journalArticle

Open Access
14 Citations (Scopus)

Energy densification of animal waste lignocellulose biomass and raw biomass

Pahla, G., Mamvura, T. A., Ntuli, F. & Muzenda, E., Dec 1 2017, In : South African Journal of Chemical Engineering. 24, p. 168-175 8 p.

Research output: Contribution to journalArticle

Open Access
14 Citations (Scopus)

Energy Efficiency as a drive towards sustainable development

Agbenyeku, E. E. O., Muzenda, E. & Msibi, M. I., 2017. 4 p.

Research output: Contribution to conferencePaper

Open Access

Energy-efficient routing algorithms based on swarm intelligence for wireless sensor networks

Zungeru, A. M., 2017, Nottingham University Press.

Research output: Other contribution

Energy Efficient Secure Data Transmission in Wireless Sensor Network

Selvaraj, R., Marwala, T. & Kuthadi, V. M., 2018

Research output: Book/ReportBook

Energy patterns in coupled α-helix protein chains with diagonal and off-diagonal couplings

Tabi, C. B., Ondoua, R. Y., Ekobena Fouda, H. P. & Kofané, T. C., Jan 1 2016, In : Physics Letters, Section A: General, Atomic and Solid State Physics. 380, 31-32, p. 2374-2381 8 p.

Research output: Contribution to journalArticle

Open Access
18 Citations (Scopus)

Energy potential of food waste generated by a middle class neigbourhood in Nigeria through anaerobic digestion

Kukoyi, T. O., Muzenda, E. & Mbohwa, C., 2017.

Research output: Contribution to conferencePaper

Open Access

Enhanced Biogas Generation from Co-Digestion of Sewage Sludge and Kitchen Bio-Waste

Manyuchi, M. M., Mbohwa, C., Muzenda, E. & Masebinu, S. O., 2018, In : Covenant Journal of Physical and Life Sciences (Special Edition). 1, 1

Research output: Contribution to journalArticle

Open Access

Enhancing the flotation recovery of copper minerals in smelter slags from Namibia prior to disposal

Sibanda, V., Sipunga, E., Danha, G. & Mamvura, T. A., Jan 2020, In : Heliyon. 6, 1, p. e03135

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)

Environmental consequences of deltamethrin residues in cattle feces in an African agricultural landscape

Sands, B., Mgidiswa, N., Nyamukondiwa, C. & Wall, R., Jan 2018, In : Ecology and Evolution. 8, 5, p. 2938-2946 9 p.

Research output: Contribution to journalArticle

Open Access
5 Citations (Scopus)

Environmental sustainability: Multi-criteria decision analysis for resource recovery from organic fraction of municipal solid waste

Masebinu, S. O., Akinlabi, E. T., Muzenda, E., Mbohwa, C., Aboyade, A. O. & Mahlatsi, T., Dec 27 2016, 2016 International Conference on Industrial Engineering and Engineering Management, IEEM 2016. IEEE Computer Society, Vol. 2016-December. p. 1543-1547 5 p. 7798136

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Environmental traps in developing countries: A case of the Dema emergency diesel power plant (EPP), Zimbabwe

Dalu, M. T. B., Wasserman, R. J., Maposa, V. G. & Dalu, T., 2017, In : Journal of Cleaner Production. 150, p. 123-126 4 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Epidemic model formulation and analysis for diarrheal infections caused by salmonella

Chaturvedi, O., Jeffrey, M., Lungu, E. & Masupe, S., 2017, In : Simulation. 93, 7, p. 543-552 10 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Erosion–corrosion behaviour of spark plasma sintered WC - 12Co in aggressive media

Ige, O. O., Aribo, S., Obadele, B. A., Langa, T., Oluwasegun, K. M., Shongwe, M. B. & Olubambi, P. A., Aug 1 2017, In : International Journal of Refractory Metals and Hard Materials. 66, p. 36-43 8 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)

Erosion-corrosion characteristics of spark plasma sintered pure nickel in simulated mine water

Ige, O. O., Aribo, S., Obadele, B. A., Langa, T. & Olubambi, P. A., Jan 1 2017, In : Tribology International. 109, p. 441-446 6 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)