Find Research Outputs

Search in all content

Filters for Research Output

Search concepts
Selected filters
2019

Survival analysis and prognostic factors associated with the timing of first forced sexual act among women in Kenya, Zimbabwe and Cote d‘Ivoire

Fagbamigbe, A. F., Abi, R., Akinwumi, T., Ogunsuji, O., Odigwe, A. & Olowolafe, T., Jul 2019, In : Scientific African. 4, e00092.

Research output: Contribution to journalArticle

Open Access

Survival analysis and prognostic factors of the timing of first antenatal care visit in Nigeria

Fagbamigbe, A. F., Abel, C., Mashabe, B. & Adebowale, A. S., Sep 2019, In : Advances in Integrative Medicine. 6, 3, p. 110-119 10 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Sustainability issues in sputtering deposition technology

Mwema, F. M., Akinlabi, E. T. & Oladijo, O. P., 2019, 4th North American IEOM Conference. IEOM 2019. IEOM Society, p. 737-744 8 p. (Proceedings of the International Conference on Industrial Engineering and Operations Management).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Synchrotron radiation characterization of magnetron sputtered WC-Co thin films on mild steel substrate

Phiri, R. R., Oladijo, O. P., Akinlabi, E. T., Rattanachata, A. & Nakajima, H., 2019, In : Materials Research Express. 6, 12, 126435.

Research output: Contribution to journalArticle

Open Access

The burr-weibull power series class of distributions

Oluyede, B. O., Mdlongwa, P., Makubate, B. & Huang, S., Jan 8 2019, In : Austrian Journal of Statistics. 48, p. 1-13 13 p.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)

The effect of a sulphate-reducing bacteria on the rate of corrosion of steel alloys

Shaku, L., Danha, G., Hlabangana, N. & Bhero, S., 2019, In : Procedia Manufacturing. 35, p. 513-521 9 p.

Research output: Contribution to journalConference article

Open Access

The effect of chemical reagents on flotation performance of a pentlandite ore: An attainable region approach

Sibanda, V., Khan, R. & Danha, G., Jun 15 2019, In : Powder Technology. 352, p. 462-469 8 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

The Effect of RF Power on the Properties of Gallium and Aluminium Co-doped Zinc Oxide (GAZO) Thin Films

Muchuweni, E., Sathiaraj, T. S., Masanganise, J. & Muchanyereyi, N., Jan 15 2019, In : Journal of Inorganic and Organometallic Polymers and Materials. 29, 1, p. 49-58 10 p.

Research output: Contribution to journalArticle

The influence of titanium addition on wettability of high-chromium white cast iron-matrix composites

Madzivhandila, T., Bhero, S. & Varachia, F., May 1 2019, In : Journal of Composite Materials. 53, 11, p. 1567-1576 10 p.

Research output: Contribution to journalReview article

2 Citations (Scopus)

The microstructural and mechanical characterization of the β-type Ti-11.1Mo-10.8Nb alloy for biomedical applications

Raganya, M. L., Moshokoa, N. M., Obadele, B., Olubambi, P. A. & Machaka, R., Nov 8 2019, In : IOP Conference Series: Materials Science and Engineering. 655, 1, 012025.

Research output: Contribution to journalConference article

Open Access
1 Citation (Scopus)

The nonglacial diamictite of Toutswemogala Hill (Lower Karoo Supergroup, Central Botswana): Implications on the extent of the Late Paleozoic ice age in the Kalahari–Karoo basin

Dietrich, P., Franchi, F., Setlhabi, L., Prevec, R. & Bamford, M., Jan 1 2019, In : Journal of Sedimentary Research. 89, 10, p. 875-889 15 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

The novel use of calcium sulphate dihydrate as a bleaching agent for pre-processing beef tallow in the soap manufacturing process

Chakawa, D. P., Nkala, M., Hlabangana, N. & Muzenda, E., 2019, In : Procedia Manufacturing. 35, p. 911-916 6 p.

Research output: Contribution to journalConference article

Open Access
1 Citation (Scopus)
4 Citations (Scopus)

Thermal Diffusivity Behaviour of Multi-walled Carbon Nanotube Reinforced Ti6Al4V Metal Matrix Composites

Adegbenjo, A., Obadele, B., Olubambi, P., Shongwe, M. & Adejuwon, S., Apr 3 2019, In : IOP Conference Series: Materials Science and Engineering. 499, 1, 012010.

Research output: Contribution to journalConference article

Open Access

Thermally sprayed Inconel 625 coating on 304 stainless steel: A neutron diffraction stress analysis

Oladijo, O. P., Luzin, V. & Ntsoane, T. P., 2019, In : Procedia Manufacturing. 35, p. 1234-1239 6 p.

Research output: Contribution to journalConference article

Open Access
1 Citation (Scopus)
Open Access

The use of calcium sulphate dihydrate (CaSO4.2H2O) as a bleaching agent for crude soya bean vegetable oil

Chakawa, D. P., Nkala, M., Hlabangana, N. & Muzenda, E., 2019, In : Procedia Manufacturing. 35, p. 802-807 6 p.

Research output: Contribution to journalConference article

Open Access
1 Citation (Scopus)

Time series analysis of quarterly rainfall and temperature (1900–2012) in sub-Saharan African countries

Gil-Alana, L. A., Yaya, O. O. S. & Fagbamigbe, A. F., Jul 1 2019, In : Theoretical and Applied Climatology. 137, 1-2, p. 61-76 16 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Titanium-based matrix composites reinforced with particulate, microstructure, and mechanical properties using spark plasma sintering technique: a review

Falodun, O. E., Obadele, B. A., Oke, S. R., Okoro, A. M. & Olubambi, P. A., Jun 19 2019, In : International Journal of Advanced Manufacturing Technology. 102, 5-8, p. 1689-1701 13 p.

Research output: Contribution to journalReview article

14 Citations (Scopus)

Top-Down Fabrication Process of ZnO NWFETs

Ditshego, N. & Sultan, S. M., Apr 2019, In : Journal of Nano Research. 57, p. 77-92

Research output: Contribution to journalArticle

File
1 Citation (Scopus)
23 Downloads (Pure)

Transport and diffusion of Brownian particles in a tilted deformable potential

Kepnang Pebeu, M. F., Woulaché, R. L., Tabi, C. B. & Kofane, T. C., Jan 1 2019, (Accepted/In press) In : Physica A: Statistical Mechanics and its Applications. 123284.

Research output: Contribution to journalArticle

Transversal field and heat transfer in the flow of non-linear viscoelastic fluids in tear-drop shaped tubes including viscous dissipation

Siginer, D. A., Letelier, M. F., Barrera, C. & González, A., Jul 2019, In : International Journal of Thermal Sciences. 141, p. 150-159 10 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Treatment of wastewater using vermifiltration technology

Manyuchi, M. M., Mupoperi, N., Mbohwa, C. & Muzenda, E., Mar 9 2019, Water Conservation, Recycling and Reuse: Issues and Challenges. Springer Singapore, p. 215-230 16 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Tribological and microstructural investigation of hybrid AA8011/ZrB2-Si3N4 nanomaterials for service life improvement

Fayomi, J., Popoola, A. P. I., Popoola, O. M., Oladijo, O. P. & Fayomi, O. S. I., Sep 2019, In : Results in Physics. 14, 102469.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)

Tungsten carbide thin films Review: Effect of deposition parameters on film microstructure and properties

Phiri, R. R., Oladijo, O. P. & Akinlabi, E. T., 2019, In : Procedia Manufacturing. 35, p. 522-528 7 p.

Research output: Contribution to journalConference article

Open Access

Unstable cAMP wave patterns during aggregation of Dictyostelium discoideum cells

Zaoro, N. R., Tabi, C. B., Etémé, A. S. & Kofané, T. C., Jan 1 2019, (Accepted/In press) In : Physics Letters, Section A: General, Atomic and Solid State Physics. 384, 6, 126133.

Research output: Contribution to journalArticle

Unstable discrete modes in Hindmarsh–Rose neural networks under magnetic flow effect

Tabi, C. B., Etémé, A. S., Mohamadou, A. & Kofané, T. C., Apr 7 2019, In : Chaos, Solitons and Fractals. 123, p. 116 123 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)

Unsteady Flow of Power Law Fluids with Wall Slip in Microducts

Akyildiz, F. T., Siginer, D. A. & Boutaous, MH., Aug 1 2019, In : Journal of Fluids Engineering, Transactions of the ASME. 141, 8, 081107.

Research output: Contribution to journalArticle

Unsteady gaseous Poiseuille slip flow in rectangular microchannels

Siginer, D. A., Akyildiz, F. T. & Boutaous, M., Jul 1 2019, In : Journal of the Brazilian Society of Mechanical Sciences and Engineering. 41, 7, 286.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)

Unsteady MHD chemically reactive double-diffusive Casson fluid past a flat plate in porous medium with heat and mass transfer

Das, M., Mahanta, G., Shaw, S. & Parida, S. B., Jul 2019, In : Heat Transfer - Asian Research. 48, 5, p. 1761-1777 17 p.

Research output: Contribution to journalArticle

Open Access
6 Citations (Scopus)

Use of coal fly ash to manufacture a corrosion resistant brick

Moyo, V., Mguni, N. G., Hlabangana, N. & Danha, G., 2019, In : Procedia Manufacturing. 35, p. 500-512 13 p.

Research output: Contribution to journalConference article

Open Access

Use of water melon seeds in water treatment

Manyuchi, M. M., Chikomo, T., Mbohwa, C. & Muzenda, E., 2019, 4th North American IEOM Conference. IEOM 2019. IEOM Society, p. 5-10 6 p. (Proceedings of the International Conference on Industrial Engineering and Operations Management).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

User studies on end-user service composition: A literature review and a design framework

Zhao, L., Loucopoulos, P., Kavakli, E. & Letsholo, K. J., Jul 2019, In : ACM Transactions on the Web. 13, 3, 15.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Utilization of waste cooking oil and tallow for production of toilet “bath” soap

Maotsela, T., Danha, G. & Muzenda, E., 2019, In : Procedia Manufacturing. 35, p. 541-545 5 p.

Research output: Contribution to journalConference article

Open Access
3 Citations (Scopus)
2 Citations (Scopus)

Waste management and treatment of copper slag BCL, Selebi Phikwe Botswana: Review

Gabasiane, T. S., Bhero, S. & Danha, G., 2019, In : Procedia Manufacturing. 35, p. 494-499 6 p.

Research output: Contribution to journalConference article

Open Access

Waste to Energy Opportunities in Botswana: A Case Study Review

Charis, G., Danha, G., Muzenda, E., Muzenda, E., Patel, B. & Mateescu, C., Nov 2019, Proceedings of 2019 7th International Renewable and Sustainable Energy Conference, IRSEC 2019. El Hibaoui, A., Essaaidi, M. & Zaz, Y. (eds.). Institute of Electrical and Electronics Engineers Inc., 9078153. (Proceedings of 2019 7th International Renewable and Sustainable Energy Conference, IRSEC 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
4 Citations (Scopus)

Water Leak Detection from Irrigation Pipelines in Botswana using Vibration Interpretation Technique

Moni, N. A., Sigweni, B., Mangwala, M. & Kolobe, L., Sep 1 2019, In : IEEE AFRICON Conference. 2019-September

Research output: Contribution to journalArticle

Wear studies of spark plasma sintered ZrO2 reinforced Ti-6Al-4V alloy

Semetse, L., Obadele, B. A., Raganya, L. & Olubambi, P. A., Dec 2019, In : Materials Today: Proceedings. In press, 7 p.

Research output: Contribution to journalArticle

What is the Link between Malaria Prevention in Pregnancy and Neonatal Survival in Nigeria?

Adeoye, I. A. & Fagbamigbe, A. F., Mar 1 2019, In : African journal of reproductive health. 23, 1, p. 139-149 11 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

ZnO Nanowire Field Effect Transistor for Biosensing: A Review

Ditshego, N. M. J., 2019, In : Journal of Nano Research. 60, p. 94-112 19 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)
2018

3D MHD Free Convective Stretched Flow of a Radiative Nanofluid Inspired by Variable Magnetic Field

Nayak, M. K., Shaw, S. & Chamkha, A. J., Aug 3 2018, In : Arabian Journal for Science and Engineering. 44, 2, p. 1269-1282 14 p.

Research output: Contribution to journalArticle

12 Citations (Scopus)

3D modeling of the thermal phenomena during laser melting of polymers

Mokrane, A., Boutaous, MH., Xin, S. & Siginer, D., 2018, Fluids Engineering. American Society of Mechanical Engineers(ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A Bayesian approach for predicting rockburst

Adoko, A. C. & Zvarivadza, T., 2018. 5 p.

Research output: Contribution to conferencePaper

Open Access
22 Citations (Scopus)

A critical taxonomy of socio-economic studies around biomass and bio-waste to energy projects

Charis, G., Danha, G. & Muzenda, E., Sep 2018, In : Detritus. 3, September, p. 47-57 11 p.

Research output: Contribution to journalArticle

Open Access
2 Citations (Scopus)

A data-mining model for predicting low birth weight with a high AUC

Hange, U., Selvaraj, R., Galani, M. & Letsholo, K., 2018, Computer and Information Science. Lee, R. (ed.). Springer Verlag, p. 109-121 13 p. (Studies in Computational Intelligence; vol. 719).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Adsorption of zinc and Iron from acidic industrial effluent using basic oxygen furnace slag

Falayi, T. & Ntuli, F., 2018, p. 1-5. 5 p.

Research output: Contribution to conferencePaper

Open Access