Find Research outputs

Search results

• Conference contribution

  Secondary flows in eccentric-annular tubes

  Letelier, M., Siginer, D. A., Almendra, D. L. & Stockle, J., 2019, Fluids Engineering. American Society of Mechanical Engineers(ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 7).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Secondary flow
  • Constitutive models
  • Elasticity
  • Vortex flow
  • Flow fields

• Secondary flows in straight non-circular tubes - Giesekus fluid

  Letelier, M. F., Siginer, D. A. & Stockle, J., Jan 1 2013, Fluids Engineering Systems and Technologies. American Society of Mechanical Engineers (ASME), Vol. 7 A.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Secondary flow
  • Flow of fluids
  • Fluids
  1 Citation (Scopus)

• Secondary Flows of Viscoelastic Fluids in Tubes

  Siginer, D. & Letelier, M. F., 2002, Proceedings: Applied Mechanics in the Americas. American Academy of Mechanics, Vol. 9. p. 261-264 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

  • viscoelastic fluid
  • secondary flow
  • pressure gradient
  • cross section
  • pipe

• Secured and robust information hiding scheme

  Abdul-Mahdi, N. H., Yahya, A., Ahmad, R. B. & Al-Qershi, O. M., Jan 1 2013, Malaysian Technical Universities Conference on Engineering and Technology 2012, MUCET 2012. Elsevier Ltd, Vol. 53. p. 463-471 9 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Steganography
  • Image quality
  6 Citations (Scopus)

• Selection and dimensioning model of the anaerobic digester for the sewage sludge digestion to energy

  Matheri, A. N., Ntuli, F., Belaid, M., Seodigeng, T., Ngila, J. C. & Mbohwa, C., 2017, IAENG Transactions on Engineering Sciences: Special Issue for the International Association of Engineers Conferences 2016. Vol. 2.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • sludge digestion
  • digester
  • sewage sludge
  • sludge
  • energy

• Signature of aromatic carbons in the terahertz spectroscopy of bio-chars

  Lepodise, L. M., Horvat, J. & Lewis, R. A., Dec 1 2013, 2013 38th International Conference on Infrared, Millimeter, and Terahertz Waves, IRMMW-THz 2013. 6665653

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Terahertz spectroscopy
  • Carbon
  • Aromatic compounds
  • Infrared radiation
  1 Citation (Scopus)

• Simulating the hydrology and water resources of large basins in southern Africa

  Hughes, D. A., Tshimanga, R. & Tirivarombo, S., 2010, Global Change: Facing Risks and Threats to Water Resources. Vol. 340. p. 591-597 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Southern Africa
  • hydrology
  • water resource
  • rainfall
  • drought

• Simulation of a co-digester plant using aspen plus

  Nduse, R. & Oladiran, T. M., 2016, Proceedings of the 5th IASTED International Conference on Power and Energy Systems, AfricaPES 2016. Acta Press, p. 325-332 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Biogas
  • Fossil fuels
  • Anaerobic digestion
  • Stoichiometry
  • Process engineering
  2 Citations (Scopus)

• Sintering and heat-treatment of injection moulded 440K-type martensitic stainless steel compacts

  Yousaf Anwar, M., Bhero, S., Messer, P. F. & Davies, H. A., 2008, Proceedings of the Euro International Powder Metallurgy Congress and Exhibition, Euro PM 2008. European Powder Metallurgy Association (EPMA), Vol. 2. p. 215-220 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • martensitic stainless steels
  • Martensitic stainless steel
  • Sintering
  • Heat treatment
  • heat treatment

• Sizing of an anaerobic biodigester for the organic fraction of municipal solid waste

  Kigozi, R., Aboyade, A. O. & Muzenda, E., Jan 1 2014, World Congress on Engineering, WCE 2014. Douglas, C., Ao, S. I., Ao, S. I., Grundfest, W. S., Burgstone, J., Douglas, C., Burgstone, J. & Ao, S. I. (eds.). Newswood Limited, Vol. 2. p. 659-663 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Municipal solid waste
  • Anaerobic digestion
  • Biogas
  • Waste management
  • Microorganisms
  4 Citations (Scopus)

• Sliding mode simulation and robustaness controller

  Ahmed, A. A., Ahmad, R. B., Alobaidi, S. A., Yahya, A., Hassnawi, L. A., Ali, Z. G. & Tahir, H. H., Dec 1 2011, Proceedings - 2nd International Conference on Engineering and Industries, ICEI 2011. p. 91-96 6 p. 6218534

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Controllers
  • MATLAB
  1 Citation (Scopus)

• Small, low cost and high performance filters for mobile telecommunication

  Chuma, J. M., Mirshekar, D., Masupe, S. & Kepaletswe, T., 2004, 2004 IEEE AFRICON: 7th AFRICON Conference in Africa: Technology Innovation. Vol. 2. p. 1011-1013 3 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Cellular telephones
  • Telecommunication
  • Base stations
  • Air
  • Communication
  1 Citation (Scopus)

• Smart start-stop system for a camless engine employing rotary valves

  Zibani, I., Chuma, J. & Marumo, R., 2014, Proceedings of the IASTED International Conference on Modelling and Simulation, AfricaMS 2014. ACTA Press, p. 184-191 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • engine
  • economy
  • industry

• Soft information assisted phase noise estimation in vector OFDM using linear MMSE receivers

  Ngebani, I., Li, Y., Xia, X. G., Zhao, M., Chuma, J. & Cai, Y., 2015, Proceedings of 19th International ITG Workshop on Smart Antennas, WSA 2015. Institute of Electrical and Electronics Engineers Inc., 7051827

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Phase noise
  • Orthogonal frequency division multiplexing
  • Error compensation
  • Error analysis
  • Compensation and Redress

• Soil biochemical properties and plant growth of Platycodongrandiflorium in major plantation area in South Korea

  Rubenecia, M. R. U., Park, J. S., Kim, B. S., Ultra Jr, V. & Lee, S. C., 2013, The Korean society of medical crop science symposium conference. p. 99

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Soil chemical and microbial properties affecting root growth of Platycodongrandiflorum

  Rubenecia, M. R. U., Ultra Jr, V. & Lee, S. C., 2014, Improvement of crop productivity in response to climate change. p. 26

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Soil Nutrient Status of Major Ginseng Production Areas in South Korea

  Rubenecia, M. R. U., Seo, P. D., Ultra Jr, V., Park, C. B., Ahn, Y. S. & Lee, S. C., 2013, The Korean society of medical crop science symposium conference. p. 101

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Solar energy for high grade thermal applications in the tropical region

  Oladiran, M. T., 1997, Solar Engineering. Claridge, D. E. & Pacheco, J. E. (eds.). ASME, p. 405-410 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • tropical regions
  • solar energy
  • tropical region
  • Tropics
  • grade

• Spheroidisation and oxide disruption phenomena in direct selective laser melting (SLM) of pre-alloyed Al-Mg and Al-Si powders

  Olakanmi, E. O., Cochrane, R. F. & Dalgarno, K. W., Oct 5 2009, TMS 2009 - 138th Annual Meeting and Exhibition - Supplemental Proceedings. Vol. 1. p. 371-380 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Selective laser melting
  • Oxides
  • Powders
  • melting
  • oxides
  7 Citations (Scopus)

• SPI-climate change impacts on agricultural droughts

  Tirivarombo, S., 2014, Proceedings of the IASTED International Conference on Environment and Water Resource Management, AfricaEWRM 2014. ACTA Press, p. 51-58 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Precipitation (meteorology)
  • Drought
  • Climate change
  • climate change impact
  • drought

• Stabilisation and solidification of steel industry sludge

  Falayi, T. & Ntuli, F., 2018, HNICEM 2017 - 9th International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment and Management. Institute of Electrical and Electronics Engineers Inc., p. 1-4 4 p. (HNICEM 2017 - 9th International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment and Management; vol. 2018-January).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

  • Oxides
  • steel industry
  • Solidification
  • Iron and steel industry
  • Steel

• Stacked and planar dual-mode filters using dielectric loaded rectangular cavity resonator

  Mirshekar-Syahakal, D., Sim, C. W. & Chuma, J. M., Jan 1 2000, ICMMT 2000 - 2000 2nd International Conference on Microwave and Millimeter Wave Technology. Institute of Electrical and Electronics Engineers Inc., p. 100-103 4 p. 895630

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Cavity resonators
  • Resonators
  • Elliptic filters
  • Specifications

• Steady secondary flows of Phan-Thien-Tanner fluids in the vicinity of a corner

  Letelier, M. F., Acosta, M., Córdova, J. & Siginer, D. A., 2002, Fluids Engineering. American Society of Mechanical Engineers (ASME), p. 291-295 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Secondary flow
  • Relaxation time
  • Fluids
  • Pressure gradient

• Structural and mechanical analysis of silane compounds coatings on AISI 304

  Baruwa, A. D., Akinlabi, E. T., Oladijo, O. P. & Mwema, F., 2019, Mechanics of Solids, Structures, and Fluids. American Society of Mechanical Engineers(ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 9).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Silanes
  • Strength of materials
  • Structural analysis
  • Coatings
  • Scratch resistance

• Structural behaviour of beams under simultaneous load and steel corrosion

  Malumbela, G., Moyo, P. & Alexander, M., 2009, Concrete Repair, Rehabilitation and Retrofitting II - Proceedings of the 2nd International Conference on Concrete Repair, Rehabilitation and Retrofitting, ICCRRR. p. 253-254 2 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Steel corrosion
  • Corrosion
  • Tensile strain
  • Sodium chloride
  • Steel
  5 Citations (Scopus)

• Study of interactive stresses in thin WC-Co coating of thick mild steel substrate using high-precision neutron diffraction

  Venter, A. M., Luzin, V., Oladijo, O. P., Cornish, L. A. & Sacks, N., 2014, Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation VI. Vol. 772. p. 161-165 5 p. (Materials Science Forum; vol. 772).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Neutron diffraction
  • neutron diffraction
  • Carbon steel
  • Coatings
  • steels
  3 Citations (Scopus)

• Study of NOx reduction in counter-current chromatographic reactor

  Cristian, B. J. C. & Agachi, P. S., Dec 1 2006, 2006 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR. p. 102-106 5 p. 4022828

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Computer simulation
  • Reactor operation
  • Selective catalytic reduction
  • Emission control
  • Ammonia

• Study on the mechanical behavior of excavation and support construction of shallow tunnel

  Yang, Z. X., Song, L., Wang, H., Jiao, Y. Y., Li, S. C., Adoko, A. C. & Zhang, H. Q., 2013, Advances in Civil and Industrial Engineering. Vol. 353-354. p. 1693-1698 6 p. (Applied Mechanics and Materials; vol. 353-354).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Excavation
  • Tunnels
  • Rock pressure
  • Arches
  • Linings

• Sub-tropical clayey soils-acid mine drainage interactions: A glance at material

  Agbenyeku, E. E. O., Muzenda, E. & Msibi, I. M., Jan 1 2016, WCECS 2016 - World Congress on Engineering and Computer Science 2016. Grundfest, W. S., Douglas, C. & Ao, S. I. (eds.). Newswood Limited, Vol. 2226. p. 630-635 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Drainage
  • Acids
  • Soils
  • Groundwater resources
  • Climate change

• Suitability of Municipal Solid Waste Transfer Stations in Harare, Zimbabwe

  Nhubu, T., Muzenda, E., Mbohwa, C., Patel, B. & Mateescu, C., Nov 2019, Proceedings of 2019 7th International Renewable and Sustainable Energy Conference, IRSEC 2019. El Hibaoui, A., Essaaidi, M. & Zaz, Y. (eds.). Institute of Electrical and Electronics Engineers Inc., 9078181. (Proceedings of 2019 7th International Renewable and Sustainable Energy Conference, IRSEC 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Transfer stations
  • Municipal solid waste
  • Waste management
  • Global warming
  • Eutrophication

• Surface coating processes: From conventional to the advanced methods; a short review

  Baruwa, A. D., Akinlabi, E. T. & Oladijo, O. P., 2020, Advances in Manufacturing Engineering - Selected Articles from ICMMPE 2019. Emamian, S. S., Yusof, F. & Awang, M. (eds.). Springer Nature, Singapore, p. 483-494 12 p. (Lecture Notes in Mechanical Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Coatings
  • Powders

• Surface coating processes: From conventional to silane organic compound applications: recent and prospects

  Baruwa, A. D., Akinlabi, E. T., Oladijo, O. P. & Mwema, F. M., Sep 2020, Advances in Manufacturing Engineering - Selected Articles from ICMMPE 2019. Emamian, S. S., Yusof, F. & Awang, M. (eds.). Springer Nature, Singapore, p. 495-502 8 p. (Lecture Notes in Mechanical Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Silanes
  • Organic compounds
  • Coatings
  • Chemical compounds

• Sustainability issues in sputtering deposition technology

  Mwema, F. M., Akinlabi, E. T. & Oladijo, O. P., 2019, 4th North American IEOM Conference. IEOM 2019. IEOM Society, p. 737-744 8 p. (Proceedings of the International Conference on Industrial Engineering and Operations Management).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Sputtering
  • Sustainable development
  • Plasma
  • Sustainability
  • Plasma density
  1 Citation (Scopus)

• Sustenance of dark fermentative hydrogen production by an undefined bacterial culture

  Obazu, F. O., Afolabi, A. S., Daramola, M. O. & Gray, V. M., Jan 1 2015, WCE 2015 - World Congress on Engineering 2015. Ao, S. I., Gelman, L., Gelman, L., Hukins, D. W. L., Hunter, A., Korsunsky, A. M., Ao, S. I. & Ao, S. I. (eds.). Newswood Limited, Vol. 2218. p. 951-954 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Effluents
  • Hydrogen production
  • Energy balance
  • Fuel cells
  • Productivity

• Synergizing food-energy-water (few) resources for sustainable benefits

  Agbenyeku, E. E. O., Muzenda, E., Msibi, I. M. & Masebinu, S. O., Jan 1 2015, WCECS 2015 - World Congress on Engineering and Computer Science 2015. Douglas, C., Burgstone, J., Grundfest, W. S., Burgstone, J., Douglas, C. & Ao, S. I. (eds.). Newswood Limited, Vol. 2220. p. 632-636 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Water resources
  • Ecosystems
  • Glaciers
  • Drought
  • Water supply

• Synthesis, characterization of gold (III) complexes and an in vitro evaluation of their cytotoxic properties

  Chiririwa, H. & Muzenda, E., 2014, World Congress on Engineering, WCE 2014. Newswood Limited, Vol. 2. p. 637-640 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Ligands
  • Gold
  • Infrared spectroscopy
  • Nuclear magnetic resonance
  • Melting point
  3 Citations (Scopus)

• Synthesis and characterization of new nitrogen donor ligands

  Chiririwa, H. & Muzenda, E., Jan 1 2014, World Congress on Engineering, WCE 2014. Douglas, C., Ao, S. I., Ao, S. I., Grundfest, W. S., Burgstone, J., Douglas, C., Burgstone, J. & Ao, S. I. (eds.). Newswood Limited, Vol. 2. p. 624-627 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Ligands
  • Nitrogen
  • Phenols
  • Condensation
  • Aldehydes

• System model performance coupled with DPSK modulation over flat rayleigh fading channels

  Sidek, O., Yahya, A. & Salleh, M. F. M., 2009, Proceedings of the 2009 5th Advanced International Conference on Telecommunications, AICT 2009. p. 194-197 4 p. 5072430

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Phase shift keying
  • system model
  • Rayleigh fading
  • Bit error rate
  • Fading channels
  1 Citation (Scopus)

• Techno-Econometric Analysis of Membrane Technology for Biogas Upgrading

  Masebinu, S. O., Akinlabi, E. T., Muzenda, E., Mbohwa, C. & Aboyade, A. O., 2015, WCECS 2015: Transactions on Engineering Technologies. Ao, S. I., Kim, H. & Amouzegar, M. (eds.). Springer Singapore, p. 481-497

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Membrane technology
  • Biogas
  • Gases
  • Costs
  • Recovery

• Techno-economic feasibility for recovering biogas in a bio augmented municipal sewage plant

  Manyuchi, M. M., Mbohwa, C. & Muzenda, E., 2018, Proceedings of the International Conference on Industrial Engineering and Operations Management, IEOM 2018. IEOM Society, p. 37-44 8 p. (Proceedings of the International Conference on Industrial Engineering and Operations Management; vol. 2018-March).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Biogas
  • Sewage
  • Economics
  • Sewage Sludge
  • Sewage treatment plants

• Technological Advances and Sustainable Workforce Development through Enhanced Collaboration for Sustainability of Transport Infrastructure

  Zhang, G. & Oladele, A. S., 2020, International Conference on Transportation and Development 2020: Planning and Development - Selected Papers from the International Conference on Transportation and Development 2020. Zhang, G. (ed.). American Society of Civil Engineers (ASCE), p. 277-286 10 p. (International Conference on Transportation and Development 2020: Planning and Development - Selected Papers from the International Conference on Transportation and Development 2020).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Transport sector
  • Sustainable development
  • sustainable development
  • sustainability
  • infrastructure

• Technology selection of biogas digesters for OFMSW via multi-criteria decision analysis

  Kigozi, R., Aboyade, A. O. & Muzenda, E., Jan 1 2014, World Congress on Engineering, WCE 2014. Newswood Limited, Vol. 2. p. 1069-1075 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Decision theory
  • Biogas
  • Anaerobic digestion
  • Microorganisms
  • Land fill
  1 Citation (Scopus)

• Technology transfer centre activities for developing transportation engineering professionals-a case of Botswana

  Oladele, A. S., 2014, T and DI Congress 2014: Planes, Trains, and Automobiles - Proceedings of the 2nd Transportation and Development Institute Congress. American Society of Civil Engineers (ASCE), p. 584-591 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Technology transfer
  • Highway administration
  • Information technology
  • Availability

• Termite-hill: Routing towards a mobile sink for improving network lifetime in Wireless Sensor Networks

  Zungeru, A. M., Ang, L. M. & Seng, K. P., Apr 26 2012, Proceedings - 3rd International Conference on Intelligent Systems Modelling and Simulation, ISMS 2012. p. 622-627 6 p. 6169774

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Network Lifetime
  • Wireless Sensor Networks
  • Routing
  • Routing algorithms
  • Wireless sensor networks
  15 Citations (Scopus)

• The applicability of dc resistivity imaging to investigating the feedback mechanism between water quality and transpiration beneath circular islands in the Okavango delta, Botswana: A Case study of Thata Island

  Molwalefhe, L. N. & Shemang, E. M., Dec 1 2007, Environmental and Engineering Geophysical Society - 20th, SAGEEP 2007: Geophysical Investigation and Problem Solving for the Next Generation. Vol. 1. p. 385-398 14 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Botswana
  • water quality
  • transpiration
  • Transpiration
  • Water quality

• The control of foot-and-mouth disease in Botswana: Special reference to vaccination

  Letshwenyo, M., Fanikiso, M. & Chimbombi, M., 2005, Control of Infectious Animal Diseases by Vaccination. Schudel, A. & Lombard, M. (eds.). p. 403-413 11 p. (Developments in Biologicals; vol. 119).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Botswana
  • Foot-and-Mouth Disease
  • Vaccination
  • Disease control
  • Vaccines
  4 Citations (Scopus)

• The development and application of incremental sheet forming in bio-medical industries

  Oladele, S. K. & Samuel, A. A., Dec 1 2012, Materials Science and Technology Conference and Exhibition 2012, MS and T 2012. Vol. 2. p. 1540-1547 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Caustics
  • Biocompatibility
  • Orthopedics
  • Titanium
  • Automotive industry

• The dynamics of plug zones in elasto-plastic flows in unsteady flow in circular tubes

  Letelier, M. F., Siginer, D. A., Ahumada, J. L. & Stockle, J. S., Dec 1 2012, ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012. PARTS A, B, C, D ed. Vol. 7. p. 1023-1028 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Unsteady flow
  • Plastic flow
  • Fluids
  • Plastics

• The effect of composition of carbon fibre on the mechanical and morhpological properties of carbon fibre reinforced polyamide 6 (PA6/CF)

  Ude, A. U., Ratnam, C. T. & Azhari, C. H., 2007, General Poster Session 2007: Light Metals - Proceedings of Symposium held during the 2007 TMS Annual Meeting. p. 31-40 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • nylon 6
  • Carbon Fiber
  • Polyamides
  • carbon fiber
  • Carbon fibers
  2 Citations (Scopus)

• The effect of valve control on a motor vehicle engine performance

  Zibani, I., Chuma, J. & Marumo, R. R., 2012, Proceedings of the IASTED African Conference on Modelling and Simulation, AfricaMS 2012. p. 140-147 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Camshafts
  • Engine
  • Timing
  • Pistons
  • Engines