Find Research Outputs

Search in all content

Filters for Research Output

Search concepts
Selected filters
2019

Effect of Solids Concentration in Cow Dung on Biogas Yield

Makhura, E. P., Muzenda, E. & Lekgoba, T., Nov 2019, Proceedings of 2019 7th International Renewable and Sustainable Energy Conference, IRSEC 2019. El Hibaoui, A., Essaaidi, M. & Zaz, Y. (eds.). Institute of Electrical and Electronics Engineers Inc., 9078218. (Proceedings of 2019 7th International Renewable and Sustainable Energy Conference, IRSEC 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of Supertargeting and Non Isothermal Stream Mixing in Heat Exchanger Network Design Using Modified Pinch Analysis

Azeez, O., Blessing, O., Onyinye, E. & Hassan, A., May 2019, In : International Journal of Energy and Environmental Science. 4, 1, p. 18-26 9 p.

Research output: Contribution to journalArticle

Open Access

Effect of the operation parameters on the Fischer Tropsch synthesis process using different reactors

Makhura, E., Rakereng, J., Rapoo, O. & Danha, G., 2019, In : Procedia Manufacturing. 35, p. 349-355 7 p.

Research output: Contribution to journalConference article

Open Access

Effect of TiN addition on corrosion behavior of spark plasma sintered 304L austenitic stainless steel in chloride media

Olukayode Akinwamide, S., Jeremiah Akinribide, O., Mafafo, M., Phumlani, M., Abiodun Obadele, B., Tolulope Abe, B. & Apata Olubambi, P., Nov 2019, In : Materials Today: Proceedings.

Research output: Contribution to journalArticle

Effect of varying low substrate temperature on sputtered aluminium films

Mwema, F. M., Akinlabi, E. T., Oladijo, O. P. & Majumdar, J. D., 2019, In : Materials Research Express. 6, 5, 056404.

Research output: Contribution to journalArticle

10 Citations (Scopus)

Effects of biomass/coal copyrolysis parameters on the product yield: A review

Thibanyane, N., Agachi, P. & Danha, G., 2019, In : Procedia Manufacturing. 35, p. 477-487 11 p.

Research output: Contribution to journalConference article

Open Access

Effects of Hydrology on Fish Diversity and Assemblage Structure in a Texan Coastal Plains River

Bower, L. M., Keppeler, F. W., Cunha, E. R., Quintana, Y., Saenz, D. E., Lopez-Delgado, E. O., Bokhutlo, T., Arantes, C. C., Andrade, M. C., Robertson, C. R., Mayes, K. B. & Winemiller, K. O., Jan 2019, In : Transactions of the American Fisheries Society. 148, 1, p. 207-218 12 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Effects of Mo content on the microstructural and mechanical properties of as-cast Ti-Mo alloys

Moshokoa, N., Raganya, L., Obadele, B., Olubambi, P. & Machaka, R., Nov 8 2019, In : IOP Conference Series: Materials Science and Engineering. 655, 1, 012015.

Research output: Contribution to journalConference article

Open Access
1 Citation (Scopus)

Effects of temperature and rainfall in plant–herbivore interactions at different altitude

Asfaw, M. D., Kassa, S. M., Lungu, E. & Bewket, W., Aug 2019, In : Ecological Modelling. 406, p. 50 - 59

Research output: Contribution to journalArticle

Efficient load balancing and multicasting for uncertain-source SDN: Real-time link-cost monitoring

Semong, T. & Xie, K., 2019, Software Engineering and Algorithms in Intelligent Systems - Proceedings of 7th Computer Science On-line Conference 2018. Silhavy, R. (ed.). Springer Verlag, Vol. 763. p. 178-187 10 p. (Advances in Intelligent Systems and Computing; vol. 763).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Electrochemical Characteristics of Cathodically Protected 2205 Duplex Stainless Steel in Saline Environment

Tladi, M. N. A., Obadele, B. A. & Olubambi, P. A., Oct 1 2019, In : Journal of Failure Analysis and Prevention. 19, 5, p. 1428-1438 11 p.

Research output: Contribution to journalArticle

Electrochemical study of calcareous deposit formation in simulated soil solution under cathodic protection

Phumlani, M., Philippe, R., Babatunde, O., Marc, J. & Peter, O., 2019, Key Engineering Materials. Trans Tech Publications Ltd, p. 307-312 6 p. (Key Engineering Materials; vol. 821 KEM).

Research output: Chapter in Book/Report/Conference proceedingChapter

3 Citations (Scopus)

Environmental impacts for setting up a waste to energy landfill site

Manyuchi, M. M., Mbohwa, C., Mpeta, M. & Muzenda, E., 2019, In : Proceedings of the International Conference on Industrial Engineering and Operations Management. 2019, MAR, p. 25-30 6 p.

Research output: Contribution to journalConference article

Evaluating the usability of bio coal from sugar cane bagasse as a solid fuel

Manyuchi, M. M., Mbohwa, C. & Muzenda, E., 2019, In : Procedia Manufacturing. 33, p. 516-521 6 p.

Research output: Contribution to journalConference article

Open Access

Evaluation of wear and corrosion behaviour of hybrid sintered ti6al4v alloy

Ayodele, O. O., Awotunde, M. A., Shongwe, M. B., Adegbenjo, A. O., Babalola, B. J., Obadele, B. A. & Olubambi, P. A., Jan 1 2019, Key Engineering Materials IX. Korsunsky, A. M. (ed.). Trans Tech Publications Ltd, p. 321-326 6 p. (Key Engineering Materials; vol. 821 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Evolution of an Archaean intracratonic basin: A review of the Transvaal Supergroup lithostratigraphy in Botswana

Franchi, F. & Mapeo, R. B. M., Apr 2019, In : Earth-Science Reviews. 191, p. 273-290 18 p.

Research output: Contribution to journalReview article

5 Citations (Scopus)

Evolution of microstructure and wear properties of aluminum thin films with sputtering substrate temperature

Mwema, F. M., Akinlabi, E. T., Oladijo, O. P. & Dutta Majumdar, J., May 13 2019, 2019 IEEE 10th International Conference on Mechanical and Intelligent Manufacturing Technologies, ICMIMT 2019. Institute of Electrical and Electronics Engineers Inc., p. 31-36 6 p. 8712046. (2019 IEEE 10th International Conference on Mechanical and Intelligent Manufacturing Technologies, ICMIMT 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Evolution of surface roughness and mechanical properties of Sputtered Aluminum thin films

Mwema, F. M., Akinlabi, E. T. & Oladijo, O. P., Dec 18 2019, In : Journal of Physics: Conference Series. 1378, 3, 032093.

Research output: Contribution to journalConference article

Open Access

Evolution of the IVGDR and its fine structure from doubly-magic 40 Ca to neutron-rich 48 Ca probed using (p, p 0 ) scattering

Latif, M. B., Usman, I. T., Carter, J., Sideras-Haddad, E., Donaldson, L. M., Jingo, M., Kureba, C. O., Pellegri, L., Neveling, R., Smit, F. D., Nemulodi, F., von Neumann-Cosel, P., Ponomarev, Y. Y., Papka, P., Swartz, J. A., Cooper, G. R. J., Fujita, H., Papakonstantinou, P. & Litvinova, E., Mar 2019, In : Acta Physica Polonica B. 50, 3, p. 461-468 8 p.

Research output: Contribution to journalArticle

Open Access
4 Citations (Scopus)

Experimental study of ZrB2-Si3N4 on the microstructure, mechanical and electrical properties of high grade AA8011 metal matrix composites

Fayomi, J., Popoola, A. P. I., Oladijo, O. P., Popoola, O. M. & Fayomi, O. S. I., Jun 25 2019, In : Journal of Alloys and Compounds. 790, p. 610-615 6 p.

Research output: Contribution to journalArticle

15 Citations (Scopus)

Exploring the effect of rf power in sputtering of aluminum thin films-a microstructure analysis

Mwema, F. M., Akinlabi, E. T. & Oladijo, O. P., 2019, 4th North American IEOM Conference. IEOM 2019. IEOM Society, p. 745-750 6 p. (Proceedings of the International Conference on Industrial Engineering and Operations Management).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Exploring the sintering process parameters on erosion-corrosion characteristics of Fe-Cr-Ni steels in artificial mine water

Ige, O. O., Oke, S. R., Mphahlele, M. R., Aribo, S., Obadele, B. A., Lephuthing, S. S., Olawale, J. O., Ajibola, O. O., Daniyan, A. A. & Olubambi, P. A., Oct 2019, In : Tribology International. 138, p. 79-88 10 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Fabrication and effect of milling time on spark plasma sintered Ti6Al4V/Gr Composite

Ayodele, O. O., Komape, T. J., Awotunde, M. A., Shongwe, M. B., Obadele, B. A., Babalola, B. J. & Olubambi, P. A., Jan 1 2019, In : Materials Today: Proceedings. 18, p. 3693-3701 9 p.

Research output: Contribution to journalConference article

Fall of ground characterization: A case study of BCL Mine, Botswana

Adoko, A. C., Zhalel, M. & Phumaphi, P. T., 2019. 10 p.

Research output: Contribution to conferencePaper

Firing and synchronization modes in neural network under magnetic stimulation

Etémé, A. S., Tabi, C. B. & Mohamadou, A., Jan 14 2019, In : Communications in Nonlinear Science and Numerical Simulation. 72, p. 432-440 8 p.

Research output: Contribution to journalArticle

Open Access
10 Citations (Scopus)

Fish bladder-based activated carbon/Co3O4/TiO2 composite electrodes for supercapacitors

Sirengo, K., Jande, Y. A. C., Kibona, T. E., Hilonga, A., Muiva, C. & King'ondu, C. K., Jun 15 2019, In : Materials Chemistry and Physics. 232, p. 49-56 8 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Fractal analysis of hillocks: A case of RF sputtered aluminum thin films

Mwema, F. M., Akinlabi, E. T. & Oladijo, O. P., Sep 30 2019, In : Applied Surface Science. 489, p. 614-623 10 p.

Research output: Contribution to journalArticle

12 Citations (Scopus)

Fretting Biocorrosion Behaviour of Titanium-Zirconia composites in Foetal Bovine Serum

Semetse, L., Obadele, B. A., Raganya, L., Geringer, J. & Olubambi, P. A., Nov 8 2019, In : IOP Conference Series: Materials Science and Engineering. 655, 1, 012034.

Research output: Contribution to journalConference article

Open Access

Fretting corrosion behaviour of Ti-6Al-4V reinforced with zirconia in foetal bovine serum

Semetse, L., Obadele, B. A., Raganya, L., Geringer, J. & Olubambi, P. A., Dec 2019, In : Journal of the Mechanical Behavior of Biomedical Materials. 100, 103392.

Research output: Contribution to journalArticle

8 Citations (Scopus)

Fuzzy Inference System-Based for TBM Field Penetration Index Estimation in Rock Mass

Adoko, A. C. & Yagiz, S., Jun 1 2019, In : Geotechnical and Geological Engineering. 37, 3, p. 1533-1553 21 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)
Open Access

GIXRD, Raman and Surface analysis of TiC thin film coating produced by RF Magnetron Sputtering

Abegunde, O. O., Akinlabi, E. T. & Oladijo, O. P., Dec 18 2019, In : Journal of Physics: Conference Series. 1378, 2, 022032.

Research output: Contribution to journalConference article

Open Access
1 Citation (Scopus)

Global monitoring of antimicrobial resistance based on metagenomics analyses of urban sewage

the Global Sewage Surveillance project consortium, Dec 1 2019, In : Nature Communications. 10, 1, 1124.

Research output: Contribution to journalArticle

Open Access
82 Citations (Scopus)

Global Plastic Waste Pollution Challenges and Management

Mazhandu, Z. S. & Muzenda, E., Nov 2019, Proceedings of 2019 7th International Renewable and Sustainable Energy Conference, IRSEC 2019. El Hibaoui, A., Essaaidi, M. & Zaz, Y. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 1-8 8 p. 9078268. (Proceedings of 2019 7th International Renewable and Sustainable Energy Conference, IRSEC 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gold value addition and beneficiation for women in the mining sector

Manyuchi, M. M., Mbohwa, C. & Muzenda, E., 2019, In : Proceedings of the International Conference on Industrial Engineering and Operations Management. July, p. 1258-1264 7 p.

Research output: Contribution to journalConference article

1 Citation (Scopus)

Hochschild cohomology of Sullivan algebras and mapping spaces

Gatsinzi, J-B., 2019, In : Arab Journal of Mathematical Sciences. 25, 1, p. 123-129 7 p.

Research output: Contribution to journalArticle

Influence of Heat Treatment on Microstructure and Mechanical Properties of Ni-Fe-Co Ternary Alloy Prepared via Spark Plasma Sintering

Bopape, I. M. C., Shongwe, M. B., Ogunmuyiwa, E. N., Rominiyi, A. L. & Jeje, S. O., Nov 8 2019, In : IOP Conference Series: Materials Science and Engineering. 655, 1, 012030.

Research output: Contribution to journalConference article

Open Access

Influence of low-tannin sorghum on performance and bone morphometrics of male Ross 308 broilers aged 1 - 42 days

Manyelo, T. G., Ng'ambi, J. W., Norris, D. & Mabelebele, M., 2019, In : South African Journal of Animal Sciences. 49, 3, p. 477-484 8 p.

Research output: Contribution to journalArticle

Open Access

Influence of nanocrystalline nickel powder on oxidation resistance of spark plasma sintered Ni-17Cr6.5Co1.2Mo6Al4W7.6Ta alloy

Babalola, B. J., Maledi, N., Shongwe, M. B., Bodunrin, M. O., Obadele, B. A. & Olubambi, P. A., Jan 21 2019, (Accepted/In press) In : Journal of King Saud University - Engineering Sciences.

Research output: Contribution to journalArticle

Open Access
5 Citations (Scopus)

Influence of scoria and pumice on key performance indicators of Portland cement concrete

Mboya, H. A., Njau, K. N., Mrema, A. L. & King'ondu, C. K., 2019, In : Construction and Building Materials. 197, p. 444-453

Research output: Contribution to journalArticle

4 Citations (Scopus)

Influence of SiAlON Ceramic Reinforcement on Ti6Al4V Alloy Matrix via Spark Plasma Sintering Technique

Falodun, O. E., Oke, S. R., Obadele, B. A., Okoro, A. M. & Olubambi, P. A., Nov 28 2019, (Accepted/In press) In : Metals and Materials International.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Influence of sintering methods on the mechanical properties of aluminium nanocomposites reinforced with carbonaceous compounds: A review

Awotunde, M. A., Adegbenjo, A. O., Obadele, B. A., Okoro, M., Shongwe, B. M. & Olubambi, P. A., Apr 2019, In : Journal of Materials Research and Technology. 8, 2, p. 2432-2449 18 p.

Research output: Contribution to journalReview article

Open Access
12 Citations (Scopus)

Influence of wood fly ash reinforcement on the wear behaviour of friction stir processed aluminium-based surface matrix composite

Ikumapayi, O. M., Akinlabi, E. T., Majumdar, J. D., Oladijo, O. P. & Akinlabi, S. A., 2019, 4th North American IEOM Conference. IEOM 2019. IEOM Society, p. 966-977 12 p. (Proceedings of the International Conference on Industrial Engineering and Operations Management).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Integrated experimental approach for alloying of surface layer Ti6Al4V? metal matrix composites using laser treatment

Ogunlana, M. O., Akinlabi, E. T., Erinosho, M. F., Johnson, O. T. & Oladijo, O. P., 2019, In : Materials Research. 22, 2, e20180368.

Research output: Contribution to journalArticle

Open Access
3 Citations (Scopus)

Intercritical Annealing Temperature: Influence on the Mechanical Properties of Low Alloy Dual-Phase Fe/0.08C/0.4Mn Steel.

Ogunmefun, A. O., Jamiru, T., Sadiku, E. R., Obadele, B. A. & Olorundaisi, E., Oct 2019, 2019 Open Innovations Conference, OI 2019. Ochara, N. M. & Odhiambo, J. N. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 141-146 6 p. 8908167. (2019 Open Innovations Conference, OI 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution