Find Research outputs

Search results

• Mixing processes during the Antarctic vortex split in September-October 2002 as inferred from source gas and ozone distributions from ENVISAT-MIPAS

  Glatthor, N., von Clarmann, T., Fischer, H., Funke, B., Grabowski, U., Höpfner, M., Kellmann, S., Kiefer, M., Linden, A., Milz, M., Steck, T., Stiller, G. P., Tsidu, G. M. & Wang, D. Y., Mar 2005, In: Journal of the Atmospheric Sciences. 62, 3, p. 787-800 14 p.

  Research output: Contribution to journal › Article › peer-review
  56 Citations (Scopus)

• Mixing in a tank stirred by a Rushton turbine at a low clearance

  Ochieng, A., Onyango, M. S., Kumar, A., Kiriamiti, H. K. & Musonge, P., 2008, In: Chemical Engineering and Processing: Process Intensification. 47, 5, p. 842-851

  Research output: Contribution to journal › Article › peer-review

  Open Access
  55 Citations (Scopus)

• Mixing Efficiency in Draft Tube Column and Stirred Tanks

  Ochieng, A., Onyango, M. S. & Kiriamiti, H. K., 2014, In: African Journal of Technology. 1, 1

  Research output: Contribution to journal › Article › peer-review

• Mixed layer sub-tropical clayey soil-AMD percolation: Analysis of permeation limits and breakthrough patterns

  Agbenyeku, E. E. & Muzenda, E., 2019, In: Procedia Manufacturing. 35, p. 903-910 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Mitt. Österr. Geol. Ges

  Proyer, A. & Krenn, K., 2007

  Research output: Other contribution

• Missing Data Recovery Based on Tensor-CUR Decomposition

  Wang, L., Xie, K., Semong, T. & Zhou, H., 2018, In: IEEE Access. 6, p. 532-544 13 p.

  Research output: Contribution to journal › Article › peer-review

  5 Citations (Scopus)

• Mining waste management for sustainable mining practices

  Manyuchi, M. M., Mbohwa, C. & Muzenda, E., 2019, In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2019, MAR, p. 137-142 6 p.

  Research output: Contribution to journal › Conference article › peer-review

• Mining of graphics for information and knowledge retrieval

  Avramenko, Y., Ani, E. C., Kraslawski, A. & Agachi, P. S., Mar 20 2009, In: Computers and Chemical Engineering. 33, 3, p. 618-627 10 p.

  Research output: Contribution to journal › Article › peer-review
  8 Citations (Scopus)

• Mining and the Environment in Ghana - An Economic Controversy

  Al-Hassan, S., Mireku-Gyimah, D. & Suglo, R., 1997.

  Research output: Contribution to conference › Paper › peer-review

  Open Access

• Minimum-norm solution of variational inequality and fixed point problem in banach spaces

  Zegeye, H., Shahzad, N. & Yao, Y., Jan 1 2015, In: Optimization. 64, 2, p. 453-471 19 p.

  Research output: Contribution to journal › Article › peer-review
  75 Citations (Scopus)

• Minimum-norm fixed point of pseudocontractive mappings

  Zegeye, H., Shahzad, N. & Alghamdi, M. A., Dec 1 2012, In: Abstract and Applied Analysis. 2012, 926017.

  Research output: Contribution to journal › Article › peer-review
  13 Citations (Scopus)

• Minimax method for the inversion of Fredholm equations of the first kind and the determination of linear relaxation spectra

  Yanovsky, Y. G., Basistov, Y. A. & Siginer, D. A., 1995, Developments and Applications of Non-Newtonian Flows. ASME, Vol. 231. p. 39-52 14 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Minimax Method and Relaxation Spectra in Rheometry

  Dennis, S., Basistov, Y. A. & Yanovsky, Y. G., 1994, Advances in Structured and Heterogeneous Continua. Allerton Press Inc., p. 277-286

  Research output: Chapter in Book/Report/Conference proceeding › Chapter (peer-reviewed) › peer-review

• Minimal Pairs of Polytopes and Their Number of Vertices

  Kassa, S. M., 2009, In: SINET: Ethiopian Journal of Science. p. 1-8

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Mine stope performance assessment in unfavorable rock mass conditions using neural network-based classifiers

  Adoko, A. C., Yakubov, K. & Alipov, A., 2019, 5th ISRM Young Scholars' Symposium on Rock Mechanics and International Symposium on Rock Engineering for Innovative Future, YSRM 2019. International Society for Rock Mechanics and Rock Engineering, p. 451-456 6 p. (5th ISRM Young Scholars' Symposium on Rock Mechanics and International Symposium on Rock Engineering for Innovative Future, YSRM 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Mineral Processing Plant Simulator in Continuous Surface Mining

  Frimpong, S., Er, G. K. & Suglo, R. S., 2003, 12th International Symposium on Mine Planning and Equipment Selection. 1 ed. p. 365-368 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Mineralogy of Tailings Dump around Selebi Phikwe Nickel-Copper Plant, Botswana

  Ekosse, G-I., J VAN DEN HEEVER, D., de Jager, L. & Totolo, O., Jan 1 2004, In: Journal of Applied Science and Environmental Management . 8

  Research output: Contribution to journal › Article › peer-review

• Mineralogy and micromorphology of a late Neogene paleosol sequence at Langebaanweg, South Africa: Inference of paleoclimates

  Eze, P. N. & Meadows, M. E., Sep 1 2014, In: Palaeogeography, Palaeoclimatology, Palaeoecology. 409, p. 205-216 12 p.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)

• Mineralogy and geochemistry of the Ngaoundaba Crater Lake sediments, northern Cameroon: implications for provenance and trace metals status

  Ekoa Bessa, A. Z., Armstrong-Altrin, J. S., Fuh, G. C., Bineli Betsi, T., Kelepile, T. & Ndjigui, P. D., Mar 18 2021, In: Acta Geochimica.

  Research output: Contribution to journal › Article › peer-review

• Mineralogy and geochemistry of soils developed along the slopes of Mt. Cameroon, West Africa

  Manga, V. E., Suh, C. E., Agyingi, C. M. & Shemang, E. M., May 1 2013, In: Journal of African Earth Sciences. 81, p. 82-93 12 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Mineralogy, geochemistry and petrography of methane-derived authigenic carbonates from Enza River, Northern Apennines (Italy)

  Viola, I., Oppo, D., Franchi, F., Capozzi, R., Dinelli, E., Liverani, B. & Taviani, M., Sep 1 2015, In: Marine and Petroleum Geology. 66, p. 566-581 16 p.

  Research output: Contribution to journal › Article › peer-review
  14 Citations (Scopus)

• Mineralogical characterisation of Matsitama banded iron ore

  Ramakgala, C. & Danha, G., Sep 19 2019, In: IOP Conference Series: Materials Science and Engineering. 641, 1, 012029.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  1 Citation (Scopus)

• Mineral genesis of the Matsheng soils, Kalagadi Basin, Botswana: . Proceedings of the Microscopy society of Southern Africa.

  Totolo, O., Ekosse, G. E. & Coetzee, S. H., 2003. 22 p.

  Research output: Contribution to conference › Paper › peer-review

• Mineral dust aerosol distributions, its direct and semi-direct effects over South Africa based on regional climate model simulation

  Tesfaye, M., Tsidu, G. M., Botai, J., Sivakumar, V. & deW. Rautenbach, C. J., Mar 1 2015, In: Journal of Arid Environments. 114, p. 22-40 19 p.

  Research output: Contribution to journal › Article › peer-review
  12 Citations (Scopus)

• Mineral chemistry, bulk rock geochemistry, and S-isotope signature of lode-gold mineralization in the Bétaré Oya gold district, south-east Cameroon

  Vishiti, A., Suh, C. E., Lehmann, B., Shemang, E. M., Ngome, N. L. J., Nshanji, N. J., Chinjo, F. E., Mongwe, O. Y., Egbe, A. J. & Petersen, S., 2017, In: Geological Journal. 53, 6, p. 2579-2596 18 p.

  Research output: Contribution to journal › Article › peer-review
  9 Citations (Scopus)

• Mind the gap: what explains the rural-nonrural inequality in diarrhoea among under-five children in low and medium-income countries? A decomposition analysis

  Fagbamigbe, A. F., Oyinlola, F. F., Morakinyo, O. M., Adebowale, A. S., Fagbamigbe, O. S. & Uthman, A. O., Dec 2021, In: BMC Public Health. 21, 1, 15 p., 575.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Mind the gap: What explains the poor-non-poor inequalities in severe wasting among under-five children in low- And middle-income countries? Compositional and structural characteristics

  Fagbamigbe, A. F., Kandala, N. B. & Uthman, O. A., Nov 2020, In: PLoS One. 15, 11 November, e0241416.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Milk production of three exotic dairy goat genotypes in limpopo province, South Africa

  Norris, D., Ngambi, J. W., Benyi, K. & Mbajiorgu, C. A., Jan 1 2011, In: Asian Journal of Animal and Veterinary Advances. 6, 3, p. 274-281 8 p.

  Research output: Contribution to journal › Article › peer-review
  13 Citations (Scopus)

• Mikromorphologie und nanomechanische Eigenschaften von gesputterten Aluminiumdünnschichten

  Mwema, F. M., Akinlabi, E. T. & Oladijo, O. P., Jun 1 2020, In: Materialwissenschaft und Werkstofftechnik. 51, 6, p. 787-791 5 p.

  Research output: Contribution to journal › Article › peer-review

• Microwave-assisted synthesis of manganese oxide octahedral molecular sieves: Effects of flow rates, power delivery, and solvent system

  Opembe, N. N., King'ondu, C. K. & Suib, S. L., 2010, In: Abstracts of Papers of the American Chemical Society. 240

  Research output: Contribution to journal › Article › peer-review

• Microwave-Assisted Synthesis of Manganese Oxide Octahedral Molecular Sieve (OMS-2) Nanomaterials under Continuous Flow Conditions

  Opembe, N. N., King'ondu, C. K., Espinal, A. E., Chen, C-H., Nyutu, E. K., Crisostomo, V. M. & Suib, S. L., 2010, In: Journal of Physical Chemistry C. 114, 34, p. 14417-14426 10 p.

  Research output: Contribution to journal › Article › peer-review
  47 Citations (Scopus)

• Microwave-Assisted Hydrothermal Synthesis of α-MnO2: Lattice Expansion via Rapid Temperature Ramping and Framework Substitution

  Pahalagedara, L. R., King'ondu, C. K., Dharmarathna, S., Pahalagedara, M. N., Meng, Y-T., Kuo, C-H. & Suib, S. L., Sep 4 2014, In: Journal of Physical Chemistry C. 118, 35, p. 20363-20373 11 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  39 Citations (Scopus)

• Microstructure and wear behaviour of Al/TiB 2 metal matrix composite

  Popoola, A. P., Pityana, S. & Ogunmuyiwa, E., 2011, Laser and Plasma Applications in Materials Science, LAPAMS 2010. Vol. 227. p. 23-26 4 p. (Advanced Materials Research; vol. 227).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  10 Citations (Scopus)

• Microstructure and Tribological Behaviour of CrCuFeNiTi High Entropy Alloys

  Sobiyi, K., Bodunrin, M., Akinlabi, E., Obadele, B., Sahari, B. B. (ed.), Qin, Q. (ed.) & Das, R. (ed.), Oct 2016, In: MATEC Web of Conferences. 82, p. 2007 1 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Microstructure and surface profiling study on the influence of substrate type on sputtered aluminum thin films

  Mwema, F. M., Akinlabi, E. T. & Oladijo, O. P., 2020, In: Materials Today: Proceedings. 26, Part 2, p. 1496-1499 4 p.

  Research output: Contribution to journal › Conference article › peer-review
  1 Citation (Scopus)

• Microstructure and scratch analysis of aluminium thin films sputtered at varying RF power on stainless steel substrates

  Mwema, F. M., Akinlabi, E. T., Oladijo, O. P. & Krishna, S., Jan 1 2020, In: Cogent Engineering. 7, 1, 12 p., 1765687.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Microstructure and mechanical properties of ultra-fine grained copper processed by equal channel angular pressing technique

  Sanusi, K. O., Afolabi, A. S. & Muzenda, E., Jan 1 2014, World Congress on Engineering, WCE 2014. Douglas, C., Ao, S. I., Ao, S. I., Grundfest, W. S., Burgstone, J., Douglas, C., Burgstone, J. & Ao, S. I. (eds.). Newswood Limited, Vol. 2. p. 1049-1053 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Microstructure and mechanical properties of Ti-Mo-Nb alloys designed using the cluster-plus-glue-atom model for orthopedic applications

  Raganya, L., Moshokoa, N., Obadele, B., Makhatha, E. & Machaka, R., 2021, (Accepted/In press) In: International Journal of Advanced Manufacturing Technology. 12 p.

  Research output: Contribution to journal › Article › peer-review

• Microstructure and mechanical properties of sputtered Aluminum thin films

  Mwema, F. M., Akinlabi, E. T., Oladijo, O. P., Krishna, S. & Majumdar, J. D., 2019, In: Procedia Manufacturing. 35, p. 929-934 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  3 Citations (Scopus)

• Microstructure and Mechanical Properties of Dissimilar Metal Weld Joint between VM12-SHC and X20 Martensitic Steels

  Maledi, N., Oladijo, O. P., Baloyi, N. & Pete, T., Jan 1 2017, In: Procedia Manufacturing. 7, p. 246-252 7 p.

  Research output: Contribution to journal › Article › peer-review

• Microstructure and mechanical characterization of aluminum thin films on steel substrates

  Mwema, F. M., Akinlabi, E. T., Oladijo, O. P., Nikolova, M. P. & Yankov, E. H., 2019, In: Materials Today: Proceedings. 18, Part 7, p. 2415-2421 7 p.

  Research output: Contribution to journal › Conference article › peer-review

• Microstructure and dry sliding wear property of laser clad Ti-6Al-4V under different counterface materials

  Obadele, B. A., Olubambi, P. A. & Pityana, S., Jan 1 2014, AMI Light Metals Conference 2014. Curle, U. A. & Möller, H. (eds.). Trans Tech Publications Ltd, p. 259-265 7 p. (Advanced Materials Research; vol. 1019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Microstructure and Corrosion Response of Spark-Plasma-Sintered 304 Austenitic Stainless Steel Reinforced with Titanium Nitride in Chloride Environments

  Akinwamide, S. O., Obadele, B. A., Adams, F. V. & Olubambi, P. A., Jun 1 2020, In: Journal of Failure Analysis and Prevention. 20, 3, p. 833-842 10 p.

  Research output: Contribution to journal › Article › peer-review

• Microstructure and corrosion behaviour of TiC reinforced duplex stainless steels matrix composites sythesized by laser melt injection

  Obadele, B., Olubambi, P. & Johnson, O., May 15 2012, Extraction and Processing Division - 2012 EPD Congress - Held During the TMS 2012 Annual Meeting and Exhibition. p. 33-40 8 p. (TMS Annual Meeting).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Microstructure and Corrosion Behaviour of TiC Reinforced Duplex Stainless Steels Matrix Composites Synthesized by Laser Melt Injection

  Obadele, B., Olubambi, P. & Johnson, O., May 2012, 141st Annual Meeting and Exhibition of The Minerals, Metals & Materials Society (TMS). Hoboken, NJ, USA, p. 33-40 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

• Microstructure, Hardness, and Wear Assessment of Spark-Plasma-Sintered Ti-xAl-1Mo Alloy

  Jeje, S. O., Shongwe, M. B., Ogunmuyiwa, E. N., Rominiyi, A. L. & Olubambi, P. A., Aug 1 2020, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 51, 8, p. 4033-4044 12 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Microstructural evolution and tribocorrosion performance of novel laser clad ti-ni-zro₂ composite coatings in 3.5% nacl solution

  Obadele, B. A., Ige, O. O. & Olubambi, P. A., Jan 1 2018, In: Ceramic Transactions. 261, p. 353-363 11 p.

  Research output: Contribution to journal › Article › peer-review

• Microstructural characterization and mechanical behaviours of TiN-graphite composites fabricated by spark plasma sintering

  Akinribide, O. J., Obadele, B. A., Akinwamide, S. O., Ayeleru, O. O., Eizadjou, M., Ringer, S. P. & Olubambi, P. A., Sep 2020, In: International Journal of Refractory Metals and Hard Materials. 91, 13 p., 105253.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Microstructural Characteristics, Crack Frequency and Diffusion Kinetics of Functionally Graded Ti-Al Composite Coatings: Effects of Laser Energy Density (LED)

  Olakanmi, E. O., Sepako, M., Morake, J., Hoosain, S. E. & Pityana, S. L., Mar 15 2019, In: JOM. 71, 3, p. 900-911 12 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Microstructural and phase evolution of spark plasma sintering of graphitized Ti (C_0.9N_0.1) composites

  Akinribide, O. J., Mekgwe, G. N., Obadele, B. A., Ajibola, O. O., Akinwamide, S. O. & Olubambi, P. A., Jan 2019, In: International Journal of Refractory Metals and Hard Materials. 78, p. 164-169 6 p.

  Research output: Contribution to journal › Article › peer-review
  7 Citations (Scopus)