Find Research outputs

Search results

• Effect of flotation parameters on recovery of South Africa nickel sulphide ore

  Afolabi, A. S., Abdulkareem, A. S. & Muzenda, E., Jan 31 2013, Energy, Environment and Sustainable Development. p. 961-968 8 p. (Applied Mechanics and Materials; vol. 261-262).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Effect of frother and depressant interaction on flotation of great dyke PGM ore

  Mberi, T., Mguni, L. L. & Ntuli, F., Jan 2018, In: Journal of the Southern African Institute of Mining and Metallurgy. 118, 1, p. 65-69 5 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  1 Citation (Scopus)

• Effect of gallium doping on the structural, optical and electrical properties of zinc oxide thin films prepared by spray pyrolysis

  Muchuweni, E., Sathiaraj, T. S. & Nyakotyo, H., Jun 1 2016, In: Ceramics International. 42, 8, p. 10066-10070 5 p.

  Research output: Contribution to journal › Article › peer-review
  63 Citations (Scopus)

• Effect of Garcinia cambogia leaf meal supplementation level at finisher stage on productivity and juiciness of male ross 308 broiler chickens

  Sebola, N. A., Ng'ambi, J. W., Norris, D. & Mbajiorgu, C. A., 2011, In: Asian Journal of Animal and Veterinary Advances. 6, 7, p. 723-730 8 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Effect of garlic meal on growth performance and carcass characteristics of indigenous Venda chickens

  Ditle, B. E., Ng'Ambi, J. W., Norris, D. & Alabi, O. J., 2020, In: Indian Journal of Animal Research. 54, 1, p. 65-69 5 p.

  Research output: Contribution to journal › Article › peer-review

• Effect of graphite addition on the tribological properties of pure titanium carbonitride prepared by spark plasma sintering

  Mekgwe, G. N., Akinribide, O. J., Langa, T., Obadele, B. A., Olubambi, P. A. & Lethabane, L. M., Apr 3 2019, In: IOP Conference Series: Materials Science and Engineering. 499, 1, 012011.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Effect of heating rate on the microstructure and mechanical properties of spark plasma sintered cnts reinforced nickel aluminide

  Ayodele, O. O., Awotunde, M. A., Shongwe, M. B., Adegbenjo, A. O., Babalola, B. J., Obadele, B. A. & Olubambi, P. A., Jan 1 2019, Key Engineering Materials IX. Korsunsky, A. M. (ed.). Trans Tech Publications Ltd, p. 440-444 5 p. (Key Engineering Materials; vol. 821 KEM).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Effect of Heat Treatment Hardening on the Dry Sliding Wear Behaviour of Mild Steel

  Lebudi, C., Oladijo, P. O., Leso, T. & Phiri, R., Jan 28 2020, In: MRS Advances. 5, 23-24, p. 1195-1202

  Research output: Contribution to journal › Article › peer-review

• Effect of heat treatment processes on the corrosion behaviour of NiTi shape memory alloy material in chloride and acidic media

  Sanusi, K. O., Afolabi, A. S. & Bolanle, D. I., 2014, Materials Science and Technology Conference and Exhibition 2013, MS and T 2013. Vol. 4. p. 2998-3003 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Effect of hollow centre post in coupled combline resonators

  Pholele, T. M., Chuma, J. M. & Ngebani, I., 2017, p. 1-2. 2 p.

  Research output: Contribution to conference › Paper › peer-review

  Open Access

• Effect of Hoodia gordonii meal supplementation at finisher stage on productivity and carcass characteristics of Ross 308 broiler chickens

  Mohlapo, T. D., Ng'ambi, J. W., Norris, D. & Malatje, M. M., Sep 1 2009, In: Tropical Animal Health and Production. 41, 7, p. 1591-1596 6 p.

  Research output: Contribution to journal › Article › peer-review
  8 Citations (Scopus)

• Effect of innate and adaptive immune mechanisms on treatment regimens in an AIDS-related Kaposi's Sarcoma model

  Chimbola, O. M., Lungu, E. M. & Szomolay, B., Dec 1 2021, In: Journal of Biological Dynamics. 15, 1, p. 213-249 37 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Effect of interstitial filling, ball and feed size on particle breakage in a laboratory ball mill: An attainable region technique

  Tembo, P. M., Khumalo, S., Chakawa, D. P., Danha, G., Hlabangana, N. & Muzenda, E., 2019, In: Procedia Manufacturing. 35, p. 80-84 5 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Effect of low energy Ag⁺ ION implantation ON ZnO nanorods for enhanced visible light absorption- structural and optical analysis

  Lefatshe, K., Muiva, C. & Madhuku, M., Dec 2021, In: Optical Materials. 122, 111757.

  Research output: Contribution to journal › Article › peer-review

• Effect of media shape on particle breakage in a batch ball mill: Lessons learnt from population balance model and attainable region technique

  Khumalo, S., Hlabangana, N., Danha, G. & Muzenda, E., 2019, In: Procedia Manufacturing. 35, p. 75-79 5 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Effect of mixing time on the bed density, and microstructure of selective laser sintered (SLS) aluminium powders

  Olakanmi, E. O., Mar 2012, In: Materials Research. 15, 2, p. 167-176 10 p.

  Research output: Contribution to journal › Article › peer-review
  14 Citations (Scopus)

• Effect of negligence and length of time delay in spontaneous behavioural changes for the response to epidemics

  Kassa, S. M. & Workineh, Y. H., 2018, In: Mathematical Methods in the Applied Sciences.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  4 Citations (Scopus)

• Effect of nickel addition on densification, microstructure and wear behaviour of spark plasma sintered CP-titanium

  Rominiyi, A. L., Shongwe, M. B., Ogunmuyiwa, E. N., Babalola, B. J., Lepele, P. F. & Olubambi, P. A., Jan 15 2020, In: Materials Chemistry and Physics. 240, 9 p., 122130.

  Research output: Contribution to journal › Article › peer-review
  8 Citations (Scopus)

• Effect of non-Newtonian characteristics of blood on magnetic targeting in the impermeable micro-vessel

  Shaw, S., Murthy, P. V. S. N. & Pradhan, S. C., Apr 1 2010, In: Journal of Magnetism and Magnetic Materials. 322, 8, p. 1037-1043 7 p.

  Research output: Contribution to journal › Article › peer-review
  31 Citations (Scopus)

• Effect of nozzle inclination on jet-impingement heat transfer in a confined cross-flow

  Ward, J., Oladiran, M. T. & Hammond, G. P., Dec 1 1991, Fundamentals of Forced Convection Heat Transfer. Publ by ASME, Vol. 181. p. 25-31 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  6 Citations (Scopus)

• Effect of O₂/Ar flow ratio on Ga and Al co-doped ZnO thin films by rf sputtering for optoelectronic device fabrication

  Muchuweni, E., Sathiaraj, T. S. & Nyakotyo, H., Nov 2017, In: Materials Research Bulletin. 95, p. 123-128 6 p.

  Research output: Contribution to journal › Article › peer-review
  14 Citations (Scopus)

• Effect of operating pressure on the application of multiple cyclones in dense medium separation (DMS) plant

  Muzenda, E., Abdulkareem, A. S., Afolabi, A. S. & Mateescu, C., Jan 1 2012, In: Particulate Science and Technology. 30, 1, p. 92-101 10 p.

  Research output: Contribution to journal › Article › peer-review

• Effect of oxygen and micro-cracking on the flotation of low grade nickel sulphide ore

  Muzenda, E. & Afolabi, A. S., 2010, In: World Academy of Science, Engineering and Technology. 4, 9, p. 615-620 6 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Effect of particle size and alkali-laccase on the properties of pterocarpus angolensis (Mukwa) wood flour

  Setswalo, K., Oladijo, O. P., Namoshe, M., Akinlabi, E. T. & Mokoba, M., 2019, In: Procedia Manufacturing. 35, p. 465-470 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Effect of phase separation on optical and electrical properties of Sn-Sb-Se glassy films

  Kumar, P., Thangaraj, R. & Sathiaraj, T. S., Jul 1 2009, In: Physica Status Solidi (A) Applications and Materials Science. 206, 7, p. 1465-1470 6 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Effect of pH on the floatability of base metal sulphides PGMs

  Afolabi, A. S., Muzenda, E. & Abdulkareem, S. A., Jan 1 2013, IAENG Transactions on Engineering Technologies - Special Edition of the World Congress on Engineering and Computer Science 2011. p. 239-248 10 p. (Lecture Notes in Electrical Engineering; vol. 170 LNEE).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Effect of physical activation/surface functional groups on wettability and electrochemical performance of carbon/activated carbon aerogels based electrode materials for electrochemical capacitors

  Abbas, Q., Mirzaeian, M., Ogwu, A. A., Mazur, M. & Gibson, D., May 7 2020, In: International Journal of Hydrogen Energy. 45, 25, p. 13586-13595 10 p.

  Research output: Contribution to journal › Article › peer-review
  17 Citations (Scopus)

• Effect of polyethylene glycol 4000 supplementation on the performance of indigenous Pedi goats fed different levels of Acacia nilotica leaf meal and ad libitum Buffalo grass hay

  Motubatse, M. R., Ng'ambi, J. W., Norris, D. & Malatje, M. M., Apr 1 2008, In: Tropical Animal Health and Production. 40, 3, p. 229-238 10 p.

  Research output: Contribution to journal › Article › peer-review
  8 Citations (Scopus)

• Effect of population structure and underlying magnitude of dominance genetic effects on the estimation of additive and dominance genetic variances

  Norris, D., Mao, I. L. & Coetzee, R. J., Jan 1 2002, In: South African Journal of Animal Sciences. 32, 2, p. 113-121 9 p.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)

• Effect of pre-weaning selection on estimates of genetic parameters and breeding values for post-weaning growth rate of beef bulls on test

  Mashiloane, M. L., Nephawe, K. A., Maiwashe, A., Norris, D. & Ngambi, J. W., Dec 1 2009, In: Tropical Animal Health and Production. 41, 8, p. 1723-1730 8 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Effect of processing parameters on the density and microstructure of direct laser sintered Al-12Si powders

  Olakanmi, E. O., Cochrane, R. F. & Dalgarno, K. W., Jan 1 2007, p. 299-311. 13 p.

  Research output: Contribution to conference › Paper › peer-review

  Open Access

• Effect of processing technique on the mechanical properties of a functionalized superhydrophobic silane

  Baruwa, A. D., Akinlabi, E. T., Oladijo, O. P., Dutta-Majumdar, J. & Krishna, S., 2019, Advanced Manufacturing. American Society of Mechanical Engineers(ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 2A-2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Effect of pulp chemistry and solids on a froth bubble size measurement method

  Bhondayi, C., Moys, M. H. & Danha, G., Sep 1 2016, In: Powder Technology. 297, p. 202-210 9 p.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)

• Effect of relay location on two-way DF and AF relay for multi-user system in LTE-A cellular networks

  Aldhaibani, J. A., Yahya, A., Ahmad, R. B., Omar, N. & Ali, Z. G., Sep 2 2013, BEIAC 2013 - 2013 IEEE Business Engineering and Industrial Applications Colloquium. p. 380-385 6 p. 6560153

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  17 Citations (Scopus)

• Effect of reverse flotation on magnetic separation concentrates

  Bada, S. O., Afolabi, A. S. & Makhula, M. J., Aug 1 2012, In: International Journal of Minerals, Metallurgy and Materials. 19, 8, p. 669-674 6 p.

  Research output: Contribution to journal › Article › peer-review
  8 Citations (Scopus)

• Effect of roughness shape on heat transfer and flow friction characteristics of solar air heater with roughened absorber plate

  Chaube, A., Sahoo, P. K. & Solanki, S. C., 2006, p. 43-51. 9 p.

  Research output: Contribution to conference › Paper › peer-review

  Open Access
  10 Citations (Scopus)

• Effect of scan rate on AFM imaging on 3D surface stereometrics of aluminum films

  Mwema, F. M., Akinlabi, E. T. & Oladijo, O. P., 2019, In: Materials Today: Proceedings. 18, Part 7, p. 2315-2321 7 p.

  Research output: Contribution to journal › Conference article › peer-review
  1 Citation (Scopus)

• Effect of sex, level and period of feed restriction during the starter stage on productivity and carcass characteristics of Ross 308 broiler chickens in South Africa

  Novele, D. J., Ng'Ambi, J. W., Norris, D. & Mbajiorgu, C. A., Jul 1 2008, In: International Journal of Poultry Science. 7, 6, p. 530-537 8 p.

  Research output: Contribution to journal › Article › peer-review
  11 Citations (Scopus)

• Effect of silicon nitride (Si₃N₄) addition on the mechanical and tribological performance of al-fe-si alloy (AA8011)

  Fayomi, J., Popoola, A. P. I., Popoola, O. M. & Oladijo, O. P., 2020, Advanced Materials and Processing Technologies II. Zhao, Y. (ed.). Trans Tech Publications Ltd, Vol. 982. p. 34-38 5 p. (Materials Science Forum; vol. 982 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Effect of sintering parameters on densification and microstructural evolution of nano-sized titanium nitride reinforced titanium alloys

  Falodun, O. E., Obadele, B. A., Oke, S. R., Maja, M. E. & Olubambi, P. A., Mar 5 2018, In: Journal of Alloys and Compounds. 736, p. 202-210 9 p.

  Research output: Contribution to journal › Article › peer-review
  40 Citations (Scopus)

• Effect of Sn addition on the optical gap and far-infrared reflectivity spectra of amorphous Sb-Se films

  Kumar, P., Thangaraj, R. & Sathiaraj, T. S., Jun 23 2010, In: Journal of Non-Crystalline Solids. 356, 31-32, p. 1611-1613 3 p.

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)

• Effect of Solids Concentration in Cow Dung on Biogas Yield

  Makhura, E. P., Muzenda, E. & Lekgoba, T., Nov 2019, Proceedings of 2019 7th International Renewable and Sustainable Energy Conference, IRSEC 2019. El Hibaoui, A., Essaaidi, M. & Zaz, Y. (eds.). Institute of Electrical and Electronics Engineers Inc., 9078218. (Proceedings of 2019 7th International Renewable and Sustainable Energy Conference, IRSEC 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Effect of solution composition on anatase to rutile transformation of sprayed TiO₂ thin films

  Juma, A. O., Acik, I. O., Mikli, V., Mere, A. & Krunks, M., Jan 1 2015, In: Thin Solid Films. 594, p. 287-292 6 p.

  Research output: Contribution to journal › Article › peer-review
  14 Citations (Scopus)

• Effect of soybean meal supplementation on pre-and post-partum productivity of Angora goats in communal rangelands of Molimo-Nthuse in Lesotho

  Ng'ambi, J. W., Khitsane, L., Norris, D. & Mbajiorgu, C. A., Jan 2008, In: Livestock Research for Rural Development. 20, 1

  Research output: Contribution to journal › Article › peer-review

• Effect of starting powder particle size and heating rate on spark plasma sintering of Fe-Ni alloys

  Shongwe, M. B., Ramakokovhu, M. M., Diouf, S., Durowoju, M. O., Obadele, B. A., Sule, R., Lethabane, M. L. & Olubambi, P. A., Sep 5 2016, In: Journal of Alloys and Compounds. 678, p. 241-248 8 p.

  Research output: Contribution to journal › Article › peer-review
  43 Citations (Scopus)

• Effect of stirring on solid solution hardening

  Adigun, O. D., Oni, A., Obadele, B. A., Olusunle, S. O., Abegunde, I. E. & Omonubi, K. B., 2021, In: Materials Today: Proceedings. 46, p. 7740-7744 5 p.

  Research output: Contribution to journal › Conference article › peer-review

• Effect of substrate moisture on the weatherability of surface treatment for High-Performance Concrete (HPC)

  Bader, T., Unterberger, S. H. & Lackner, R., 2017, In: Cement and Concrete Composites. 83, p. 57-65 9 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  5 Citations (Scopus)

• Effect of substrate on the 3 body abrasion wear of HVOF WC-17 wt.% Co coatings

  Oladijo, O. P., Sacks, N., Cornish, L. A. & Venter, A. M., Nov 1 2012, In: International Journal of Refractory Metals and Hard Materials. 35, p. 288-294 7 p.

  Research output: Contribution to journal › Article › peer-review
  15 Citations (Scopus)

• Effect of substrates on the microstructure of thermally sprayed WC-4.88 wt% Co coatings

  Oladijo, O. P., Venter, A. M., Cornish, L. A., Sacks, N. & Shrivastava, S., 2010, Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010. European Powder Metallurgy Association (EPMA), Vol. 3.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Effect of substrate type on the fractal characteristics of AFM images of sputtered aluminium thin films

  Mwema, F. M., Akinlabi, E. T. & Oladijo, O. P., 2020, In: Medziagotyra. 26, 1, p. 49-57 9 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  1 Citation (Scopus)