• 165 Citations
  • 5 h-Index
20072017
If you made any changes in Pure these will be visible here soon.

Research Output 2007 2017

  • 165 Citations
  • 5 h-Index
  • 7 Article
  • 3 Conference contribution
2017
2 Citations (Scopus)

Crashworthy characteristics of axial quasi-statically compressed Bombyx mori composite cylindrical tubes: Experimental

Ude, A. U., Eshkoor, R. A. & Azhari, C. H., 2017, In : Fibers and Polymers. 18, 8, p. 1594-1601 8 p.

Research output: Contribution to journalArticle

Open Access
Energy absorption
Crushing
Fibers
Composite materials
Crashworthiness
2015
24 Citations (Scopus)

Energy absorption and load carrying capability of woven natural silk epoxy - Triggered composite tubes

Eshkoor, R. A., Ude, A. U., Sulong, A. B., Zulkifli, R., Ariffin, A. K. & Azhari, C. H., Jan 1 2015, In : Composites Part B: Engineering. 77, p. 10-18 9 p., 3451.

Research output: Contribution to journalArticle

Silk
Energy absorption
Dynamic loads
Crashworthiness
Composite materials
2014
50 Citations (Scopus)

Bombyx mori silk fibre and its composite: A review of contemporary developments

Ude, A. U., Eshkoor, R. A., Zulkifili, R., Ariffin, A. K., Dzuraidah, A. W. & Azhari, C. H., Jan 1 2014, In : Materials and Design. 57, p. 298-305 8 p.

Research output: Contribution to journalArticle

Silk
Natural fibers
Fibers
Composite materials
Automotive industry
38 Citations (Scopus)

Failure mechanism of woven natural silk/epoxy rectangular composite tubes under axial quasi-static crushing test using trigger mechanism

Eshkoor, R. A., Ude, A. U., Oshkovr, S. A., Sulong, A. B., Zulkifli, R., Ariffin, A. K. & Azhari, C. H., Jan 1 2014, In : International Journal of Impact Engineering. 64, p. 53-61 9 p.

Research output: Contribution to journalArticle

Energy absorption
Crushing
Silk
Composite materials
Photography
2013
14 Citations (Scopus)

An experimental investigation on the response of woven natural silk fiber/epoxy sandwich composite panels under low velocity impact

Ude, A. U., Ariffin, A. K. & Azhari, C. H., Feb 6 2013, In : Fibers and Polymers. 14, 1, p. 127-132 6 p.

Research output: Contribution to journalArticle

Silk
Fibers
Composite materials
Debonding
Delamination
3 Citations (Scopus)

Impact behaviour of woven natural silk composite face-sheet sandwiched foam under low velocity impact

Ude, A. U., Ariffin, A. K. & Azhari, C. H., 2013, Advanced Technologies in Manufacturing, Engineering and Materials. Vol. 774-776. p. 1242-1249 8 p. (Advanced Materials Research; vol. 774-776).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Silk
Foams
Composite materials
Fiber reinforced materials
Polyvinyl chlorides
27 Citations (Scopus)
Silk
Foams
Composite materials
Bearings (structural)
Energy absorption
2011
4 Citations (Scopus)

Drop weight impact response of woven natural silk/Epoxy laminated composite plates

Ude, A. U., lashlem, A. K. A. A. A. & Azhari, C. H., Jun 1 2011, In : Australian Journal of Basic and Applied Sciences. 5, 6, p. 289-295 7 p.

Research output: Contribution to journalArticle

Laminated composites
Silk
Bearings (structural)
Reinforcement
Composite materials
2010
1 Citation (Scopus)

Energy attenuation capability of woven natural silk (WNS)/epoxy composites plates subjected to drop-weight impacts

Ude, A. U., Sopian, K. & Azhari, C. H., May 28 2010, TMS 2010 - 139th Annual Meeting and Exhibition - Supplemental Proceedings. Vol. 2. p. 115-122 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

silk
Silk
attenuation
composite materials
Composite materials
2007
2 Citations (Scopus)

The effect of composition of carbon fibre on the mechanical and morhpological properties of carbon fibre reinforced polyamide 6 (PA6/CF)

Ude, A. U., Ratnam, C. T. & Azhari, C. H., 2007, General Poster Session 2007: Light Metals - Proceedings of Symposium held during the 2007 TMS Annual Meeting. p. 31-40 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Polyamides
Carbon fibers
void
mechanical property
Mechanical properties