Faculty of Engineering & Technology

Research Output

Filter
Article
2013

An integrated anaerobic digestion and UV photocatalytic treatment of distillery wastewater

Apollo, S., Onyango, M. S. & Ochieng, A., 2013, In : Journal of Hazardous Materials. 261, p. 435-442

Research output: Contribution to journalArticle

Open Access
30 Citations (Scopus)

A novel approach towards development of real time chemical dosimetry using pulsating sensor-based instrumentation

Malathi, N., Sahoo, P., Praveen, K. & Murali, N., 2013, In : Journal of Radioanalytical and Nuclear Chemistry. 298, 2, p. 963-972 10 p.

Research output: Contribution to journalArticle

Open Access
5 Citations (Scopus)

Assessment of carbon capture options for super-critical coal-based power plants

Cormos, C. C., Cormos, A. M. & Agachi, P. S., Jan 1 2013, In : Chemical Engineering Transactions. 35, p. 367-372 6 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Challenges of designing a cracker for Morama bean - Short communication

Tjiparuro, Z., 2013, In : Research in Agricultural Engineering. 59, 1, p. 35-37 3 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)

Comparison of metastable phases induced by heat treatment of unmilled and milled cobalt powders

Bolokang, A. S., Phasha, M. J. & Bhero, S., Jan 1 2013, In : International Journal of Refractory Metals and Hard Materials. 36, p. 111-115 5 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Deposition mechanism and microstructure of laser-assisted cold-sprayed (LACS) Al-12 wt.%Si coatings: Effects of laser power

Olakanmi, E. O., Tlotleng, M., Meacock, C., Pityana, S. & Doyoyo, M., Jun 1 2013, In : JOM. 65, 6, p. 776-783 8 p.

Research output: Contribution to journalArticle

14 Citations (Scopus)
Open Access

Design of optimal 2-d nongrid sparse arrays for medical ultrasound

Diarra, B., Robini, M., Tortoli, P., Cachard, C. & Liebgott, H., Nov 4 2013, In : IEEE Transactions on Biomedical Engineering. 60, 11, p. 3093-3102 10 p., 6529099.

Research output: Contribution to journalArticle

51 Citations (Scopus)

Development and economic assessment of different WWTP control strategies for optimal simultaneous removal of carbon, nitrogen and phosphorus

Ostace, G. S., Baeza, J. A., Guerrero, J., Guisasola, A., Cristea, V. M., Agachi, P. Ş. & Lafuente, J., Jun 1 2013, In : Computers and Chemical Engineering. 53, p. 164-177 14 p.

Research output: Contribution to journalArticle

24 Citations (Scopus)
Open Access

Dynamic modeling and validation of 2-ethyl-hexenal hydrogenation process

Both, R., Cormos, A. M., Agachi, P. S. & Festila, C., May 1 2013, In : Computers and Chemical Engineering. 52, p. 100-111 12 p.

Research output: Contribution to journalArticle

12 Citations (Scopus)

Effects of TiC addition on properties of laser particle deposited WC-Co-Cr and WC-Ni coatings

Obadele, B. A., Olubambi, P. A. & Johnson, O. T., Dec 2013, In : Transactions of Nonferrous Metals Society of China. 23, 12, p. 3634-3642 9 p.

Research output: Contribution to journalArticle

11 Citations (Scopus)

Electrochemical behaviour of an austenitic stainless steel reinforced concrete in the presence of starch and cellulose admixtures

Ikotun, B. D. & Afolabi, A. S., Feb 18 2013, In : Construction and Building Materials. 42, p. 22-28 7 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Emissions analysis from combustion of eco-fuel briquettes for domestic applications

Pilusa, T. J., Huberts, R. & Muzenda, E., 2013, Journal of Energy in Southern Africa, 24, 4, p. 30-36 7 p.

Research output: Contribution to specialist publicationArticle

13 Citations (Scopus)

Energy efficiency performance improvements for ant-based routing algorithm in wireless sensor networks

Zungeru, A. M., Seng, K. P., Ang, L. M. & Chong Chia, W., Apr 5 2013, In : Journal of Sensors. 2013, 759654.

Research output: Contribution to journalArticle

Open Access
30 Citations (Scopus)

Evaluation of chemical looping systems as carbon capture option to be applied to gasification processes

Cormos, C. C., Cormos, A. M. & Agachi, S., 2013, In : Computer Aided Chemical Engineering. 32, p. 199-204 6 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Evaluation of reduction roasting and magnetic separation for upgrading Mn/Fe ratio of fine ferromanganese

Mpho, M., Samson, B. & Ayo, A., Jul 1 2013, In : International Journal of Mining Science and Technology. 23, 4, p. 537-541 5 p.

Research output: Contribution to journalArticle

21 Citations (Scopus)

Expanding the synthesis of Stöber spheres: Towards the synthesis of nano-magnesium oxide and nano-zinc oxide

Mguni, L. L., Mukenga, M., Muzenda, E., Jalama, K. & Meijboom, R., Apr 1 2013, In : Journal of Sol-Gel Science and Technology. 66, 1, p. 91-99 9 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Experimental, quantum chemical calculations, and molecular dynamic simulations insight into the corrosion inhibition properties of 2-(6-methylpyridin-2-yl)oxazolo[5,4-f][1,10]phenanthroline on mild steel

Obot, I. B., Obi-Egbedi, N. O., Ebenso, E. E., Afolabi, A. S. & Oguzie, E. E., May 1 2013, In : Research on Chemical Intermediates. 39, 5, p. 1927-1948 22 p.

Research output: Contribution to journalArticle

57 Citations (Scopus)

Generating irregular models for 3d spherical-particle-based numerical methods

Huang, G. H., Jiao, Y. Y., Zhang, X. L., Adoko, A. C. & Li, S. C., Oct 7 2013, In : Journal of Applied Mathematics. 2013, 302680.

Research output: Contribution to journalArticle

7 Citations (Scopus)
37 Citations (Scopus)

Impact of freeway mobility pattern on routing performance of mobile Ad Hoc networks

Hassnawi, L. A., Ahmad, R. B., Yahya, A., Alsanad, H. R. & Aljunid, S. A., May 1 2013, In : Journal of Next Generation Information Technology. 4, 3, p. 139-150 12 p.

Research output: Contribution to journalArticle

Industry expectations of mechanical engineering graduates. A case study in Chile

Walczak, M., Uziak, J., Oladiran, M. T., Baeza, C. C. & Paez, P. T., Feb 18 2013, In : International Journal of Engineering Education. 29, 1, p. 181-192 12 p.

Research output: Contribution to journalArticle

7 Citations (Scopus)

Kinetics studies of adsorption and desorption of South African fly ash for some phenolic compounds

Bada, S. O., Potgieter, J. H. & Afolabi, A. S., Jan 1 2013, In : Particulate Science and Technology. 31, 1, p. 1-9 9 p.

Research output: Contribution to journalArticle

7 Citations (Scopus)

Knowledge-based and data-driven fuzzy modeling for rockburst prediction

Adoko, A. C., Gokceoglu, C., Wu, L. & Zuo, Q. J., Jul 1 2013, In : International Journal of Rock Mechanics and Mining Sciences. 61, p. 86-95 10 p.

Research output: Contribution to journalArticle

94 Citations (Scopus)

Mechanical Properties and Chemical Resistance of Short Tamarind Fiber/Unsaturated Polyester Composites: Influence of Fiber Modification and Fiber Content

Maheswari, C. U., Reddy, K. O., Muzenda, E., Shukla, M. & Rajulu, A. V., Oct 1 2013, In : International Journal of Polymer Analysis and Characterization. 18, 7, p. 520-533 14 p.

Research output: Contribution to journalArticle

26 Citations (Scopus)

Novel At-Face-Slurry Performance Modeling with Elliptical and Spherical Geometries

Suglo, R., Frimpong, S. & Brown, O. F., 2013, In : Journal of Powder Metallurgy & Mining.

Research output: Contribution to journalArticle

Open Access

On coverage analysis for LTE-A cellular networks

Aldhaibani, J. A., Yahya, A., Ahmab, R. B., Md Zain, A. S., Salman, M. K. & Edan, R., Mar 28 2013, In : International Journal of Engineering and Technology. 5, 1, p. 492-497 6 p.

Research output: Contribution to journalArticle

6 Citations (Scopus)

Outlier rejection fuzzy c-means (ORFCM) algorithm for image segmentation

Siddiqui, F. U., Isa, N. A. M. & Yahya, A., Oct 21 2013, In : Turkish Journal of Electrical Engineering and Computer Sciences. 21, 6, p. 1801-1819 19 p.

Research output: Contribution to journalArticle

11 Citations (Scopus)

Parametric effects on leaching behavior of nickel-copper matte in ammonia

Muzenda, E., Ramatsa, I. M., Ntuli, F., Abdulkareem, A. S. & Afolabi, A. S., Apr 7 2013, In : Particulate Science and Technology. 31, 4, p. 319-325 7 p.

Research output: Contribution to journalArticle

9 Citations (Scopus)

Performance analysis of two-way multi-user with balance transmitted power of relay in Lte-A cellular networks

Aldhaibaini, J. A., Yahya, A., Ahmad, R. B., Md Zain, A. S. & Salman, M. K., Jan 1 2013, In : Journal of Theoretical and Applied Information Technology. 51, 2, p. 182-190 9 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)

Performance characterization of metallic substrates coated by HVOF WC-Co

Venter, A. M., Oladijo, O. P., Luzin, V., Cornish, L. A. & Sacks, N., Dec 31 2013, In : Thin Solid Films. 549, p. 330-339 10 p.

Research output: Contribution to journalArticle

23 Citations (Scopus)
Open Access

Poprawa możliwości transmisji w sieci komórkowej LTE w systemie multi-hop przy wykorzystaniu anteny kierunkowej

Translated title of the contribution: Improvement of relay link capacity in a multi-hop system by using a directional Antenna in LTE-A cellular networkAldhaibani, J. A., Yahya, A. & Ahmad, R. B., Dec 1 2013, In : Przeglad Elektrotechniczny. 89, 11, p. 195-201 7 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Pore development and combustion behavior of gasified semi-char in a drop tube furnace

Kelebopile, L., Sun, R., Wang, H., Zhang, X. & Wu, S., Mar 12 2013, In : Fuel Processing Technology. 111, p. 42-54 13 p.

Research output: Contribution to journalArticle

16 Citations (Scopus)

Predicting tunnel convergence using Multivariate Adaptive Regression Spline and Artificial Neural Network

Adoko, A. C., Jiao, Y. Y., Wu, L., Wang, H. & Wang, Z. H., Sep 1 2013, In : Tunnelling and Underground Space Technology. 38, p. 368-376 9 p.

Research output: Contribution to journalArticle

52 Citations (Scopus)

Preparing graduate talent for the mining industry: A new metric system based on an old tradition

Frimpong, S., Whiting, J. M. & Suglo, R. S., Jun 2013, Mining Engineering, 65, 6, p. 62-70 9 p.

Research output: Contribution to specialist publicationArticle

Retrofit design of heat exchanger network of a fluid catalytic cracking plant and control based on MPC

Iancu, M., Cristea, M. V. & Agachi, P. S., Feb 11 2013, In : Computers and Chemical Engineering. 49, p. 205-216 12 p.

Research output: Contribution to journalArticle

6 Citations (Scopus)
198 Citations (Scopus)

Simulation analysis model and equipment selection in continuous surface mining systems

Upadhyay, S., Suglo, R., Lin, Z., Sundararajan, S. & Szymanski, J. K., 2013, In : CIM Magazine. p. 87-94

Research output: Contribution to journalArticle

Open Access

Stability assessment of an ancient landslide crossed by two coal mine tunnels

Jiao, Y. Y., Wang, Z. H., Wang, X. Z., Adoko, A. C. & Yang, Z. X., Jun 12 2013, In : Engineering Geology. 159, p. 36-44 9 p.

Research output: Contribution to journalArticle

37 Citations (Scopus)
Open Access
2 Citations (Scopus)

Studies on understanding the mechanism of the enhanced conductivity of the third phase in PUREX process during reprocessing of fast reactor fuel

Subbuthai, S., Sahoo, P., Nageswara Rao, A. & Subba Rao, R. V., 2013, In : Journal of Radioanalytical and Nuclear Chemistry. 295, 2, p. 943-949 7 p.

Research output: Contribution to journalArticle

Open Access
3 Citations (Scopus)

Tank costs for domestic rainwater harvesting in East Africa

Parker, A., Cruddas, P., Rowe, N., Carter, R. & Webster, J., 2013, In : Water Management. 166, 10, p. 536-545 10 p.

Research output: Contribution to journalArticle

Open Access
3 Citations (Scopus)

Techno-economical assessment of coal and biomass gasification-based hydrogen production supply chain system

Muresan, M., Cormos, C. C. & Agachi, P. S., Aug 1 2013, In : Chemical Engineering Research and Design. 91, 8, p. 1527-1541 15 p.

Research output: Contribution to journalArticle

31 Citations (Scopus)

The effect of poly(ethylene-alt-maleic anhydride) on the reduction crystallisation behaviour of nickel powder

Bodoza, T. F., Ntuli, F., Chauke, D. F. & Muzenda, E., May 1 2013, In : Canadian Journal of Chemical Engineering. 91, 5, p. 822-829 8 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)