Faculty of Engineering & Technology

Research Output

Filter
Article
2016
Open Access
1 Citation (Scopus)

CFD simulations, experimental validation and parametric studies for the catalytic reduction of NO by hydrogen in a fixed bed reactor

Mihet, M., Cristea, V. M., Agachi, P. S., Cormos, A. M. & Lazar, M. D., Jan 1 2016, In : RSC Advances. 6, 92, p. 89259-89273 15 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Characterization and corrosion behaviour of plasma sprayed Zn-Sn alloy coating on mild steel

Oladijo, O. P., Mathabatha, M. H., Popoola, A. P. I. & Ntsoane, T. P., 2016, In : Surface and Coatings Technology.

Research output: Contribution to journalArticle

Open Access
4 Citations (Scopus)

Chemical alterations in three clayey soils from percolation and interaction with acid mine drainage (AMD)

Agbenyeku, E-OE., Muzenda, E. & Msibi, M. I., 2016, In : South African Journal of Chemical Engineering. 21, p. 28-36 9 p.

Research output: Contribution to journalArticle

Open Access
6 Citations (Scopus)

Coal-based adsorbents for water and wastewater treatment

Simate, G. S., Maledi, N., Ochieng, A., Ndlovu, S., Zhang, J. & Walubita, L. F., 2016, In : Journal of Environmental Chemical Engineering. 4, 2, p. 2291-2312

Research output: Contribution to journalArticle

Open Access
35 Citations (Scopus)
Open Access
7 Citations (Scopus)

Corrosion resistance of AA2036 and AA7075-T651 in contaminated acid chloride environments

Abdulwahab, M., Popoola, A. P. I., Oladijo, O. E., Loto, C. O. & Oladijo, O. P., Jul 1 2016, In : Asian Journal of Chemistry. 28, 7, p. 1453-1462 10 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)
25 Citations (Scopus)

Design and implementation of a microcontroller based buck boost converter as a smooth starter for permanent magnet motor

Ravi, S., Mezhuyev, V., Iyswarya Annapoorani, K. & Sukumar, P., Jan 1 2016, In : Telkomnika (Telecommunication Computing Electronics and Control). 1, 3, p. 566-574 9 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Design and implementation of a microcontroller based buck boost converter as a smooth starter for permanent magnet motor

Ravi, S., Mezhuyev, V., Iyswarya Annapoorani, K. & Sukumar, P., Mar 1 2016, In : Indonesian Journal of Electrical Engineering and Computer Science. 1, 3, p. 566-574 9 p.

Research output: Contribution to journalArticle

11 Citations (Scopus)

Design and implementation of Bridgeless Cuk Converter for controlled BLDC motor

Ahmed, S. F., Iyswarya Annapoorani, K. & Ravi, S., Jan 1 2016, In : International Journal of Control Theory and Applications. 9, 2, p. 821-832 12 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Determination of the Most Effective Concentration of Deet and Permethrin in A Mosquito Repellent Soap and Assay of the Active Ingredients

Mtisi, F., Parekh, C. T., Ochieng, A. & Chiririwa, H., 2016, In : International Journal of Applied Chemistry. 12, 2, p. 95-105 11 p.

Research output: Contribution to journalArticle

Open Access

Dual-gate polysilicon nanoribbon biosensors enable high sensitivity detection of proteins

Zeimpekis, I., Sun, K., Hu, C., Ditshego, N. M. J., Thomas, O., De Planque, M. R. R., Chong, H. M. H., Morgan, H. & Ashburn, P., Mar 8 2016, In : Nanotechnology. 27, 16, 165502.

Research output: Contribution to journalArticle

5 Citations (Scopus)

Effect of calcium lignosulphonate on the particulate processes during hydrogen reduction of nickel ammine sulphate solutions

Iloy, R. A. & Ntuli, F., 2016, In : Hydrometallurgy. 164, p. 321-329 9 p.

Research output: Contribution to journalArticle

Open Access

Effect of pulp chemistry and solids on a froth bubble size measurement method

Bhondayi, C., Moys, M. H. & Danha, G., Sep 1 2016, In : Powder Technology. 297, p. 202-210 9 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Effect of subthreshold slope on the sensitivity of nanoribbon sensors

Sun, K., Zeimpekis, I., Hu, C., Ditshego, N. M. J., Thomas, O., De Planque, M. R. R., Chong, H. M. H., Morgan, H. & Ashburn, P., Jun 3 2016, In : Nanotechnology. 27, 28, 285501.

Research output: Contribution to journalArticle

10 Citations (Scopus)

Effects of Daniella oliveri Wood Flour Characteristics on the Processing and Functional Properties of Wood Polymer Composites

Olakanmi, E. O., Thompson, O. M., Vunain, E., Doyoyo, M. & Meijboom, R., Jun 10 2016, In : Materials and Manufacturing Processes. 31, 8, p. 1073-1084 12 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

eLearning hands-on: blending interactive eLearning with practical engineering laboratory

Kiravu, C., Yanev, K. M., Tunde, M. O., Jeffrey, A. M., Schoenian, D. & Renner, A., 2016, In : International Journal of Information and Learning Technology. 33, 5, p. 278-299 22 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Exergy analysis of solid desiccant-vapour compression hybrid air conditioning system

Jani, D. B., Mishra, M. & Sahoo, P. K., 2016, In : International Journal of Exergy. 20, 4, p. 517-535 19 p.

Research output: Contribution to journalArticle

11 Citations (Scopus)

Experimental investigation on solid desiccant-vapor compression hybrid air-conditioning system in hot and humid weather

Jani, D. B., Mishra, M. & Sahoo, P. K., 2016, In : Applied Thermal Engineering. 104, p. 556-564 9 p.

Research output: Contribution to journalArticle

Open Access
35 Citations (Scopus)

Experimental study of the characteristics of transformer oil and some selected vegetable oils

Tola, O. J., Zungeru, A. M., Usifo, F. O. & Garba, A. J., Jan 1 2016, In : International Journal of Engineering Research in Africa. 23, p. 13-23 11 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)
5 Citations (Scopus)

Extraction and Characterization of Cellulose from Pretreated Ficus (Peepal Tree) Leaf Fibers

Reddy, K. O., Uma Maheswari, C., Muzenda, E., Shukla, M. & Rajulu, A. V., Jan 2 2016, In : Journal of Natural Fibers. 13, 1, p. 54-64 11 p.

Research output: Contribution to journalArticle

34 Citations (Scopus)

General strategies to increase the repeatability in non-target screening by liquid chromatography-high resolution mass spectrometry

Bader, T., Schulz, W., Kümmerer, K. & Winzenbacher, R., 2016, In : Analytica Chimica Acta. 935, p. 173-186 14 p.

Research output: Contribution to journalArticle

17 Citations (Scopus)

Impact of ozonation in removing organic micro-pollutants in primary and secondary municipal wastewater: effect of process parameters

Mecha, A. C., Onyango, M. S., Ochieng, A. & Momba, M. N. B., 2016, In : Water Science and Technology. 74, 3, p. 756-765

Research output: Contribution to journalArticle

Open Access
14 Citations (Scopus)

Investigating the Effect of Porosity on Corrosion Resistance and Hardness of WC-Co Coatings on Metal Substrates

Oladijo, O. P., Obadele, B. A., Venter, A. M. & Cornish, L. A., 2016, In : African Corrosion Journal. 2, 1, p. 37-44 8 p.

Research output: Contribution to journalArticle

Investigating the self-healing behaviour of under-aged and 60Sn-40Pb alloy reinforced aluminium hybrid composites

Oladijo, O. P., Bodunrin, M. O., Sobiyi, K., Maledi, N. B. & Alaneme, K. K., Dec 1 2016, In : Thin Solid Films. 620, p. 201-205 5 p.

Research output: Contribution to journalArticle

8 Citations (Scopus)

Low-cost top-down zinc oxide nanowire sensors through a highly transferable ion beam etching for healthcare applications

Sun, K., Zeimpekis, I., Hu, C., Ditshego, N. M. J., Thomas, O., De Planque, M. R. R., Chong, H. M. H., Morgan, H. & Ashburn, P., Mar 5 2016, In : Microelectronic Engineering. 153, p. 96-100 5 p.

Research output: Contribution to journalArticle

11 Citations (Scopus)

Mechanism of fiber/matrix bond and properties of wood polymer composites produced from alkaline-treated Daniella oliveri wood flour

Olakanmi, E. O., Ogunesan, E. A., Vunain, E., Lafia-Araga, R. A., Doyoyo, M. & Meijboom, R., Sep 1 2016, In : Polymer Composites. 37, 9, p. 2657-2672 16 p.

Research output: Contribution to journalArticle

8 Citations (Scopus)

Microstructure and Tribological Behaviour of CrCuFeNiTi High Entropy Alloys

Sobiyi, K., Bodunrin, M., Akinlabi, E., Obadele, B., Sahari, B. B. (ed.), Qin, Q. (ed.) & Das, R. (ed.), Oct 2016, In : MATEC Web of Conferences. 82, p. 2007 1 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)
Open Access
4 Citations (Scopus)

Modular relative jacobian for combined 3-arm parallel manipulators

Jamisola, R. S., Mastalli, C. & Ibikunle, F., Jan 1 2016, In : International Journal of Mechanical Engineering and Robotics Research. 5, 2, p. 90-95 6 p.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)

On Modelling Wisdom, Intuition, and Reason

Jamisola, R., 2016, In : Lovotics. 4, 1

Research output: Contribution to journalArticle

On the quality and performance of nanocomposite soy protein/CNTs adhesive for wood application

Afolabi, A. S., Sadare, O. O. & Daramola, M. O., Sep 1 2016, In : Advances in Natural Sciences: Nanoscience and Nanotechnology. 7, 3, 035005.

Research output: Contribution to journalArticle

7 Citations (Scopus)
17 Citations (Scopus)
16 Citations (Scopus)

Performance prediction of rotary solid desiccant dehumidifier in hybrid air-conditioning system using artificial neural network

Jani, D. B., Mishra, M. & Sahoo, P. K., 2016, In : Applied Thermal Engineering. 98, p. 1091-1103 13 p.

Research output: Contribution to journalArticle

Open Access
32 Citations (Scopus)

Performance prediction of solid desiccant - Vapor compression hybrid air-conditioning system using artificial neural network

Jani, D. B., Mishra, M. & Sahoo, P. K., 2016, In : Energy. 103, p. 618-629 12 p.

Research output: Contribution to journalArticle

Open Access
24 Citations (Scopus)

Photodegradation of Molasses Wastewater Using TiO2–ZnO Nanohybrid Photocatalyst Supported on Activated Carbon

Otieno, B., Apollo, S., Naidoo, B. E. & Ochieng, A., 2016, In : Chemical Engineering Communications. 203, 11, p. 1443-1454

Research output: Contribution to journalArticle

Open Access
22 Citations (Scopus)

Predictive mathematical modeling and computer simulation of direct ethanol fuel cell

Abdulkareem, A. S., Jimoh, A., Afolabi, A. S., Muzenda, E. & Okeke, A. C., Mar 3 2016, In : Energy Sources, Part A: Recovery, Utilization and Environmental Effects. 38, 5, p. 635-643 9 p.

Research output: Contribution to journalArticle

Open Access
5 Citations (Scopus)

PWM-based controller of output voltage for wind- driven individual self-excited induction generator

Sujitha, C., Christy, A. A., Rajasomashekar, S., Ravi, S., Brindha, R., Poornima, P. U. & Pachpor, S., Jan 1 2016, In : Indian Journal of Science and Technology. 9, 41, 95433.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Resonance modeling and control via magnetorheological dampers

Letelier, M. F., Siginer, D. A. & Stockle, J. S., Aug 1 2016, In : Zeitschrift fur Angewandte Mathematik und Physik. 67, 4, 89.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Selection of screw characteristics and operational boundary conditions to facilitate post-flush urine and faeces separation within single household sanitation systems

Mercer, E., Cruddas, P., Williams, L., Kolios, A., Parker, A., Tyrrel, S., Cartmell, E., Pidou, M. & McAdam, E. J., 2016, In : Environmental Science: Water Research and Technology. 2, 6, p. 953-964 12 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Sewage Treatment by Waste Stabilization Pond Systems

Bansah, K. & Suglo, R., 2016, In : Journal of Energy and Natural Resource Management. 3, 1

Research output: Contribution to journalArticle

Open Access

Solar Photocatalysis of Methyl Orange Using Multi-Ion Doped TiO2 Catalysts

Thulari, V. R., Akach, J., Chiririwa, H. & Ochieng, A., 2016, In : International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering. 10, 12, p. 1472-1477 6 p.

Research output: Contribution to journalArticle

Open Access

Solid desiccant air conditioning - A state of the art review

Jani, D. B., Mishra, M. & Sahoo, P. K., 2016, In : Renewable and Sustainable Energy Reviews. 60, p. 1451-1469 19 p.

Research output: Contribution to journalArticle

Open Access
77 Citations (Scopus)

Students' perspective on the use of the Blackboard platform for delivering an engineering course

Uziak, J., Oladiran, M. T., Lorencowicz, E. & Gizejowski, M., Jan 1 2016, In : World Transactions on Engineering and Technology Education. 14, 2, p. 251-257 7 p.

Research output: Contribution to journalArticle