Faculty of Engineering & Technology

Research Output

Filter
Article
Article

An experimental study of the flow of R-134a inside an adiabatic spirally coiled capillary tube

Khan, M. K., Kumar, R. & Sahoo, P. K., 2008, In : International Journal of Refrigeration. 31, 6, p. 970-978 9 p.

Research output: Contribution to journalArticle

Open Access
30 Citations (Scopus)

An Illustration of Determining Quantitatively the Rock Mass Quality Parameters of the Hoek–Brown Failure Criterion

Wu, L., Adoko, A. C. & Li, B., Apr 1 2018, In : Rock Mechanics and Rock Engineering. 51, 4, p. 1063-1076 14 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

An integrated anaerobic digestion and UV photocatalytic treatment of distillery wastewater

Apollo, S., Onyango, M. S. & Ochieng, A., 2013, In : Journal of Hazardous Materials. 261, p. 435-442

Research output: Contribution to journalArticle

Open Access
30 Citations (Scopus)
32 Citations (Scopus)

Anomalous steady flows in a tube

Siginer, A., 1991, In : Rheologica Acta. 30, 5, p. 474-479 6 p.

Research output: Contribution to journalArticle

7 Citations (Scopus)

A note on the steady flow of Newtonian fluids with pressure dependent viscosity in a rectangular duct

Akyildiz, F. T. & Siginer, D., Jul 1 2016, In : International Journal of Engineering Science. 104, p. 1-4 4 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

A novel approach for high precision rapid potentiometric titrations: Application to hydrazine assay

Sahoo, P., Malathi, N., Ananthanarayanan, R., Praveen, K. & Murali, N., 2011, In : Review of Scientific Instruments. 82, 11

Research output: Contribution to journalArticle

12 Citations (Scopus)

A novel approach towards development of real time chemical dosimetry using pulsating sensor-based instrumentation

Malathi, N., Sahoo, P., Praveen, K. & Murali, N., 2013, In : Journal of Radioanalytical and Nuclear Chemistry. 298, 2, p. 963-972 10 p.

Research output: Contribution to journalArticle

Open Access
5 Citations (Scopus)

An overview of low density parity check codes

Yahya, A., Ghani, F., Badlishah, R. & Malook, R., Jan 1 2010, In : Journal of Applied Sciences. 10, 17, p. 1910-1915 6 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

A numerical study of the effect of gas distribution profile across the pulp-froth interface on flotation performance

Bhondayi, C., Moys, M. H., Danha, G. & Fanuchi, D., Dec 1 2015, In : Powder Technology. 286, p. 22-30 9 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)
Open Access

Application of artificial neural network for predicting performance of solid desiccant cooling systems – A review

Jani, D. B., Mishra, M. & Sahoo, P. K., 2017, In : Renewable and Sustainable Energy Reviews. 80, p. 352-366 15 p.

Research output: Contribution to journalArticle

Open Access
34 Citations (Scopus)
Open Access

Application of basic process modeling in investigating the breakage behavior of UG2 ore in wet milling

Danha, G., Hildebrandt, D., Glasser, D. & Bhondayi, C., Jul 1 2015, In : Powder Technology. 279, p. 42-48 7 p.

Research output: Contribution to journalArticle

13 Citations (Scopus)

Application of mucilage from Dicerocaryum eriocarpum plant as biosorption medium in the removal of selected heavy metal ions

Bassey, O. J., Odiyo, J. O., Chimuka, L., Ochieng, A. & Bassey, B. J., 2016, In : Journal of Environmental Management. 177, p. 365-372

Research output: Contribution to journalArticle

Open Access
20 Citations (Scopus)

Application of numerical methods in the technology of hydroxyapatite

Dejeu, V. R., Toader, S., Réka, B. & Agachi, P. Ş., 2010, In : Studia Universitatis Babes-Bolyai Chemia. 4, p. 161-165 5 p.

Research output: Contribution to journalArticle

Application of the attainable region method to determine optimal conditions for milling and leaching

Hlabangana, N., Danha, G., Bwalya, M. M., Hildebrandt, D. & Glasser, D., 2017, In : Powder Technology. 317, p. 400-407 8 p.

Research output: Contribution to journalArticle

Open Access
5 Citations (Scopus)

Application of the exergetic cost theory to the LiBr/H2O vapour absorption system

Misra, R. D., Sahoo, P. K. & Gupta, A., 2002, In : Energy. 27, 11, p. 1009-1025 17 p.

Research output: Contribution to journalArticle

Open Access
38 Citations (Scopus)

A predictive model of crude oil dispersion in water: A case study of the Niger-Delta Area of Nigeria

Abdulkareem, A. S., Odigure, J. O., Otaru, M. D. O., Kuranga, M. B. & Afolabi, A. S., Jan 1 2011, In : Energy Sources, Part A: Recovery, Utilization and Environmental Effects. 33, 22, p. 2089-2103 15 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

A retrospective longitudinal study of animal and human rabies in Botswana 1989-2006

Moagabo, K. T., Monyame, K. B., Baipoledi, E. K., Letshwenyo, M., Mapitse, N. & Hyera, J. M. K., Dec 2009, In : Onderstepoort Journal of Veterinary Research. 76, 4, p. 399-407 9 p.

Research output: Contribution to journalArticle

Open Access
2 Citations (Scopus)

A review of additive manufacturing of α- β Ti alloy components through selective laser melting and laser metal deposition

Chandramohan, P., Bhero, S., Manikandasubramanian, K. & Ravishankar, B., 2018, In : Journal of Engineering Science and Technology. 13, 3, p. 790-812 23 p.

Research output: Contribution to journalArticle

Open Access
6 Citations (Scopus)

A review on quality factor enhanced on-chip microwave planar resonators

Kobe, O. B., Chuma, J., Jamisola, R. & Chose, M., 2017, In : Engineering Science and Technology, an International Journal. 20, 2, p. 460-466 7 p.

Research output: Contribution to journalArticle

Open Access
12 Citations (Scopus)

A rheological characterization of high percent solids kraft black liquor

Sanders, C. L., Bakhtiyarov, S. I. & Siginer, D. A., Dec 1 1998, In : American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED. 246, p. 137-144 8 p.

Research output: Contribution to journalArticle

Artificial neural networks modeling of the parameterized gold nanoparticles generation through photo-induced process

Gherman, A. M. M., Tosa, N., Cristea, V. M., Tosa, V., Porav, S. & Agachi, P. S., 2018, In : Materials Research Express. 5, 8

Research output: Contribution to journalArticle

2 Citations (Scopus)

Artificial neural networks used for investigation of fatty acid content of Romanian sunflower oilseeds genotypes

Brǎtfǎlean, D., Cristea, V. M. & Agachi, P. Ş., Oct 8 2010, In : Studia Universitatis Babes-Bolyai Chemia. 2, 2, p. 245-254 10 p.

Research output: Contribution to journalArticle

Artificial neural networks used for the simulation of the batch fermentation bioreactor

Cristea, V. M., Arpad, I. L., Anca, Ş., Dorina, B. & Agachi, P. Ş., Dec 1 2009, In : Studia Universitatis Babes-Bolyai Chemia. 4, 1, p. 87-94 8 p.

Research output: Contribution to journalArticle

A Secured Smart Home Switching System based on Wireless Communications and Self-Energy Harvesting

Zungeru, A. M., Gaboitaolelwe, J., Diarra, B., Chuma M, J., Ang, L. M., Kolobe, L., David, M. & Zibani, I., Mar 1 2019, In : IEEE Access. 7, p. 25063-25085 23 p., 8643838.

Research output: Contribution to journalArticle

Open Access
2 Citations (Scopus)

A semi-automated approach for extracting buildings from QuickBird imagery applied to informal settlement mapping

Mayunga, S. D., Coleman, D. J. & Zhang, Y., 2007, In : International Journal of Remote Sensing. 28, 10, p. 2343-2357 15 p.

Research output: Contribution to journalArticle

Open Access
27 Citations (Scopus)

A serological survey for antibodies to foot-and-mouth disease virus in indigenous Tswana goats and sheep in Kasane, Maun and Shakawe districts in northwestern Botswana

Hyera, J. M. K., Letshwenyo, M., Monyame, K. B., Thobokwe, G., Pilane, A. R., Mapitse, N. & Baipoledi, E. K., Jun 2006, In : Onderstepoort Journal of Veterinary Research. 73, 2, p. 143-147 5 p.

Research output: Contribution to journalArticle

Open Access
4 Citations (Scopus)

A Simple and Reliable Touch Sensitive Security System

Zungeru, A. M., Kolo, J. G. & Olumide, I., 2012, In : International Journal of Network Security & Its Applications (IJNSA). 4, 5, p. 149-165

Research output: Contribution to journalArticle

Open Access

Aspecte noi privind îmbunǎtǎţirea mǎsurǎrii debitelor eu ajutorul diafragmelor utilizând calculatoarele

Cristea, M., Agachi, Ş. & Imre, A., 1998, In : Revista de Chimie. 49, 1, p. 50-55 6 p.

Research output: Contribution to journalArticle

Aspects of traditional and advanced control of the fluid catalytic cracking unit

Cristea, M. V., Marinoiu, V. & Agachi, Ş. P., Oct 1 2002, In : Revue Roumaine de Chimie. 47, 10-11, p. 1127-1132 6 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Assessment of carbon capture options for super-critical coal-based power plants

Cormos, C. C., Cormos, A. M. & Agachi, P. S., Jan 1 2013, In : Chemical Engineering Transactions. 35, p. 367-372 6 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)
6 Citations (Scopus)

Assessment of pollutant transport and river water quality using mathematical models

Ani, E. C., Hutchins, M. G., Kraslawski, A. & Agachi, P. S., Apr 1 2010, In : Revue Roumaine de Chimie. 55, 4, p. 285-291 7 p.

Research output: Contribution to journalArticle

7 Citations (Scopus)

ASSESSMENT OF SAFETY MANAGEMENT PRACTICES AT ANKONAM BOAFO MINE

Amoako, R. & Suglo, R., 2015, In : International Journal of Science, Environment and Technology. 4, 6, p. 1442-1456

Research output: Contribution to journalArticle

Open Access

Assessment of skin hydration and softening effects of colloidal oat fraction containing cream

Creidi, P., Faivre, B. & Agachi, P., 1992, In : Journal of Applied Cosmetology. 10, 1, p. 1-6 6 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Assessment of surface finish and dimensional accuracy of tools manufactured by metal casting in rapid prototyping sand moulds

Nyembwe, K., de Beer, D. J., van der Walt, J. G. & Bhero, S., Jan 1 2012, In : South African Journal of Industrial Engineering. 23, 3, p. 130-143 14 p.

Research output: Contribution to journalArticle

8 Citations (Scopus)

Assessment of test methods for characterizing the hydrophobic nature of surface-treated High Performance Concrete

Weisheit, S., Unterberger, S. H., Bader, T. & Lackner, R., 2016, In : Construction and Building Materials. 110, p. 145-153 9 p.

Research output: Contribution to journalArticle

Open Access
17 Citations (Scopus)

Assessment of the efficiencies of auxiliary ventilation systems using empirical methods

Suglo, R. S. & Frimpong, S., Sep 1 2001, CIM Bulletin, 94, 1054, p. 67-71 5 p.

Research output: Contribution to specialist publicationArticle

4 Citations (Scopus)

A steady weak solution of the equations of motion of a viscous incompressible fluid through porous media in a domain with a non-compact boundary

Akyildiz, F. T., Neustupa, J. & Siginer, D., Jun 1 2012, In : Acta Applicandae Mathematicae. 119, 1, p. 23-42 20 p.

Research output: Contribution to journalArticle

28 Citations (Scopus)

A study for the implementation of an economic optimization of coking plants

Savu, A., Muntean, I., Lazea, G. & Agachi, P. Ş., Jan 1 2011, In : Chemical Engineering Transactions. 24, p. 409-414 6 p.

Research output: Contribution to journalArticle

A study of technology adoption in manufacturing firms

Kristianto, Y., Ajmal, M., Tenkorang, R. A. & Hussain, M., 2012, In : Journal of Manufacturing Technology Management. 23, 2, p. 198-211 14 p.

Research output: Contribution to journalArticle

13 Citations (Scopus)

A study of the variables in the optimisation of a platinum precipitation process

Phetla, T., Muzenda, E. & Belaid, M., Sep 1 2010, In : World Academy of Science, Engineering and Technology. 70, p. 248-254 7 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

A study on energy and CO2 saving potential of ground source heat pump system in India

Sivasakthivel, T., Murugesan, K. & Sahoo, P. K., 2014, In : Renewable and Sustainable Energy Reviews. 32, p. 278-293 16 p.

Research output: Contribution to journalArticle

Open Access
24 Citations (Scopus)

A study on relationship between casting geometric modulus and feeding distance of ductile iron bar-shaped castings

Saravanan, V. S., Palanisamy, C., Mohanraj, M., Shah, J. & Bhero, S., Jan 1 2016, In : International Journal of Metalcasting. 10, 4, p. 477-482 6 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)
Open Access
Open Access