Botswana International University of Science & Technology

Research Output

Filter
Conference contribution
2013

Design and development of maximum power point tracking in wind power optimization using fuzzy PLL controller

Govindaraj, T., Ravi, S. & Balakrishnan, P. A., Aug 8 2013, 2013 IEEE International Conference on Emerging Trends in Computing, Communication and Nanotechnology, ICE-CCN 2013. p. 384-389 6 p. 6528528

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Designing a model of a full control module for a camless engine employing rotary valves

Zibani, I., Chuma, J. & Marumo, R., Jan 1 2013, IEEE AFRICON 2013. Institute of Electrical and Electronics Engineers Inc., 6757724

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Development and characterization of beverages from tigernut milk, pineapple and coconut fruit extracts

Abdulfatai, J., Saka, A. A., Afolabi, A. S. & Diana, K., Jan 31 2013, Mechanical Materials and Manufacturing Engineering II. p. 304-309 6 p. (Applied Mechanics and Materials; vol. 248).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development of adsorbent from banana peel for wastewater treatment

Abdulfatai, J., Saka, A. A., Afolabi, A. S. & Micheal, O., 2013, Mechanical Materials and Manufacturing Engineering II. Vol. 248. p. 310-315 6 p. (Applied Mechanics and Materials; vol. 248).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Effect and control of suspended solids at the blast furnaces

Afolabi, A. S., Sanusi, K. O., Abdulkareem, A. S. & Bada, O. S., Jan 31 2013, Energy, Environment and Sustainable Development. p. 954-960 7 p. (Applied Mechanics and Materials; vol. 261-262).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of flotation parameters on recovery of South Africa nickel sulphide ore

Afolabi, A. S., Abdulkareem, A. S. & Muzenda, E., Jan 31 2013, Energy, Environment and Sustainable Development. p. 961-968 8 p. (Applied Mechanics and Materials; vol. 261-262).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of pH on the floatability of base metal sulphides PGMs

Afolabi, A. S., Muzenda, E. & Abdulkareem, S. A., Jan 1 2013, IAENG Transactions on Engineering Technologies - Special Edition of the World Congress on Engineering and Computer Science 2011. p. 239-248 10 p. (Lecture Notes in Electrical Engineering; vol. 170 LNEE).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of relay location on two-way DF and AF relay for multi-user system in LTE-A cellular networks

Aldhaibani, J. A., Yahya, A., Ahmad, R. B., Omar, N. & Ali, Z. G., Sep 2 2013, BEIAC 2013 - 2013 IEEE Business Engineering and Industrial Applications Colloquium. p. 380-385 6 p. 6560153

Research output: Chapter in Book/Report/Conference proceedingConference contribution

17 Citations (Scopus)

Evaluation of natural flocculants for conventional water treatment

Afolabi, A. S., Sigwadi, R., Abdulkareem, A. S. & Mateescu, C. M., Jan 31 2013, Mechanical Materials and Manufacturing Engineering II. p. 298-303 6 p. (Applied Mechanics and Materials; vol. 248).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Evaluation of solar water heating systems in Botswana

Oladiran, M. T. & Ossenburg, E., 2013, Advances in Materials and Systems Technologies IV. Vol. 824. p. 459-466 8 p. (Advanced Materials Research; vol. 824).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

High speed approach for detecting QRS complex characteristics in single lead electrocardiogram signal

Salih, S. K., Aljunid, S. A., Aljunid, S. M., Maskon, O. & Yahya, A., Dec 1 2013, Proceedings - 2013 IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2013. p. 391-396 6 p. 6719996

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Impact behaviour of woven natural silk composite face-sheet sandwiched foam under low velocity impact

Ude, A. U., Ariffin, A. K. & Azhari, C. H., 2013, Advanced Technologies in Manufacturing, Engineering and Materials. Vol. 774-776. p. 1242-1249 8 p. (Advanced Materials Research; vol. 774-776).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Improved intelligent pavement performance (IIPP) modeling for Botswana district Gravel road networks

Oladele, A. S., Nov 15 2013, Airfield and Highway Pavement 2013: Sustainable and Efficient Pavements - Proceedings of the 2013 Airfield and Highway Pavement Conference. p. 1358-1369 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Improving performance-limited interference system with coordinated multipoint transmission

Zain, A. S. M., Yahya, A., Malek, M. F. A. & Omar, N., Jan 1 2013, Malaysian Technical Universities Conference on Engineering and Technology 2012, MUCET 2012. Elsevier Ltd, Vol. 53. p. 428-434 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Investigation of Cu (II) removal from synthetic solution by ion exchange using south african clinoptilolite

Kabuba, J., Muzenda, E., Ntuli, F. & Mulaba-Bafubiandi, A., 2013, IAENG Transactions on Engineering Technologies - Special Edition of the World Congress on Engineering and Computer Science 2011. Vol. 170 LNEE. p. 249-261 13 p. (Lecture Notes in Electrical Engineering; vol. 170 LNEE).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Investigation of the treatment of wastewater using activated sludge process

Afolabi, A. S., Johnson, O., Abdukareem, A. S. & Oluwaseyi, B. S., Jan 31 2013, Energy, Environment and Sustainable Development. p. 969-976 8 p. (Applied Mechanics and Materials; vol. 261-262).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Liquid metallurgy synthesis and thermo-electrical characterization of copper-aluminum metal matrix composite

Osoba, O. L., Afolabi, A. S., Vodal, E. & Fasuba, O. A., Jul 8 2013, Materials Science and Chemical Engineering. p. 650-655 6 p. (Advanced Materials Research; vol. 699).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Low complexity burst allocation algorithm with high frame utilization for Mobile WiMAX (802.16e)

Ali, Z. G., Ahmad, R. B., Yahya, A., Hassnawi, L. A. & Aldhaibani, J. A., Sep 2 2013, BEIAC 2013 - 2013 IEEE Business Engineering and Industrial Applications Colloquium. p. 404-409 6 p. 6560158

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Mathematical model on magnetic drug targeting in a permeable microvessel

Shaw, S., Sibanda, P. & Murthy, P. V. S. N., 2013, Biomedical and Biotechnology Engineering. American Society of Mechanical Engineers (ASME), Vol. 3 B.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Operational cost reduction of an activated sludge system: Correlation between setpoint and growth substrate

Ostace, G. S., Gal, A., Cristea, V. M. & Agachi, P. Ş., 2013, IAENG Transactions on Engineering Technologies - Special Edition of the World Congress on Engineering and Computer Science 2011. Vol. 170 LNEE. p. 71-84 14 p. (Lecture Notes in Electrical Engineering; vol. 170 LNEE).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Optimization of treatment parameters on the recycling of used lubricating oil

Abdulkareem, A. S., Muzenda, E. & Afolabi, A. S., 2013, Materials Science and Chemical Engineering. Vol. 699. p. 735-741 7 p. (Advanced Materials Research; vol. 699).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Parametric effects of the performance of nanofiltration membrane

Afolabi, A. S., Sanusi, K. O., Abdulkareem, A. S. & Mohamed, J. B., 2013, Mechanical Materials and Manufacturing Engineering II. Vol. 248. p. 31-36 6 p. (Applied Mechanics and Materials; vol. 248).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Plastic flow establishment in tubes a comparison of pressure gradient and yield stress change effects

Letelier, M. F., Siginer, D. A., Uribe, G. A. & Stockle, J., Jan 1 2013, Fluids Engineering Systems and Technologies. American Society of Mechanical Engineers (ASME), Vol. 7 A.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Reagent optimization across a UG2 plant

Muzenda, E., Abdulkareem, A. S. & Afolabi, A. S., 2013, Proceedings of the World Congress on Engineering 2013, WCE 2013. Vol. 1 LNECS. p. 575-579 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Relative task prioritization for dual-arm with multiple, conflicting tasks: Derivation and experiments

Lee, J., Chang, P. H. & Jamisola, R. S., Nov 14 2013, 2013 IEEE International Conference on Robotics and Automation, ICRA 2013. p. 1928-1933 6 p. 6630833

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
9 Citations (Scopus)

Secondary flows in straight non-circular tubes - Giesekus fluid

Letelier, M. F., Siginer, D. A. & Stockle, J., Jan 1 2013, Fluids Engineering Systems and Technologies. American Society of Mechanical Engineers (ASME), Vol. 7 A.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Secured and robust information hiding scheme

Abdul-Mahdi, N. H., Yahya, A., Ahmad, R. B. & Al-Qershi, O. M., Jan 1 2013, Malaysian Technical Universities Conference on Engineering and Technology 2012, MUCET 2012. Elsevier Ltd, Vol. 53. p. 463-471 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Signature of aromatic carbons in the terahertz spectroscopy of bio-chars

Lepodise, L. M., Horvat, J. & Lewis, R. A., Dec 1 2013, 2013 38th International Conference on Infrared, Millimeter, and Terahertz Waves, IRMMW-THz 2013. 6665653

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Soil biochemical properties and plant growth of Platycodongrandiflorium in major plantation area in South Korea

Rubenecia, M. R. U., Park, J. S., Kim, B. S., Ultra Jr, V. & Lee, S. C., 2013, The Korean society of medical crop science symposium conference. p. 99

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Soil Nutrient Status of Major Ginseng Production Areas in South Korea

Rubenecia, M. R. U., Seo, P. D., Ultra Jr, V., Park, C. B., Ahn, Y. S. & Lee, S. C., 2013, The Korean society of medical crop science symposium conference. p. 101

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Study on the mechanical behavior of excavation and support construction of shallow tunnel

Yang, Z. X., Song, L., Wang, H., Jiao, Y. Y., Li, S. C., Adoko, A. C. & Zhang, H. Q., 2013, Advances in Civil and Industrial Engineering. Vol. 353-354. p. 1693-1698 6 p. (Applied Mechanics and Materials; vol. 353-354).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Towards automated road information framework - A case study of Tanzania

Runyoro, A. A. K., Zlotnikova, I. & Ko, J., Dec 1 2013, ICCAS 2013 - 2013 13th International Conference on Control, Automation and Systems. p. 267-272 6 p. 6703906

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

TRAM: A tool for transforming textual requirements into analysis models

Letsholo, K. J., Zhao, L. & Chioasca, E. V., Dec 1 2013, 2013 28th IEEE/ACM International Conference on Automated Software Engineering, ASE 2013 - Proceedings. p. 738-741 4 p. 6693146

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Transportation planning through pavement performance prediction modeling for Botswana gravel loss condition

Oladele, A. S., Vokolkova, V. & Egwurube, J. A., 2013, Advances in Civil Engineering II. PART 1 ed. Vol. 256-259. p. 2976-2982 7 p. (Applied Mechanics and Materials; vol. 256-259, no. PART 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Variable-size elements in 2D sparse arrays for 3D medical ultrasound

Diarra, B., Robini, M., Liebgott, H., Cachard, C. & Tortoli, P., Dec 1 2013, 2013 IEEE International Ultrasonics Symposium, IUS 2013. p. 508-511 4 p. 6724847

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Variable structure system with sliding mode controller

Ahmed, A. A., Ahmad, R. B., Yahya, A., Tahir, H. H. & Quinlan, J., Jan 1 2013, Malaysian Technical Universities Conference on Engineering and Technology 2012, MUCET 2012. Elsevier Ltd, Vol. 53. p. 441-452 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

9 Citations (Scopus)
2012

3GPP long term evolution and its application for healthcare services

Zain, A. S. M., Yahya, A., Malek, M. F. A. & Omar, N., Oct 15 2012, 2012 International Conference on Computer and Communication Engineering, ICCCE 2012. p. 239-243 5 p. 6271187

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Analysis of secondary flows and heat transfer in viscoelastic flow with viscous dissipation in non-circular tubes

Letelier, M. F., Zapata, F. N., Siginer, D. A. & Stockle, J., Dec 1 2012, ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012. PARTS A, B, C, D ed. Vol. 7. p. 1017-1021 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

A new algorithm for multilevel optimization problems using evolutionary strategy, inspired by natural adaptation

Tilahun, S. L., Kassa, S. M. & Ong, H. C., Oct 25 2012, PRICAI 2012: Trends in Artificial Intelligence - 12th Pacific Rim International Conference on Artificial Intelligence, Proceedings. p. 577-588 12 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 7458 LNAI).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

11 Citations (Scopus)

An integration framework for multi-perspective business process modeling

Letsholo, K., Chioasca, E. V. & Zhao, L., Oct 17 2012, Proceedings - 2012 IEEE 9th International Conference on Services Computing, SCC 2012. p. 33-40 8 p. 6274124

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Citations (Scopus)

An ontology-driven approach to mobile data collection applications for the health-care industry

Henriques, G., Lamanna, L., Kotowski, D., Hlomani, H., Stacey, D. & Baker, P., Nov 8 2012, Proceedings of the 2012 IEEE 13th International Conference on Information Reuse and Integration, IRI 2012. p. 578-583 6 p. 6303061

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Behavioural comparison of mortar and concrete properties in the presence of a modified zeolite additive

Ikotun, B. D., Afolabi, A. S. & Ikotun, A. G., 2012, Advances and Trends in Engineering Materials and Their Applications - Proceedings of Can 2012 11th AES-ATEMA International Conference. p. 261-270 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Blackboard as a tool for peer learning and interaction for engineering students

Uziak, J. & Oladiran, M. T., Jan 1 2012, Advances in Materials and Systems Technologies III. p. 591-599 9 p. (Advanced Materials Research; vol. 367).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Can business process modeling bridge the gap between business and information systems?

Zhao, L., Letsholo, K., Chioasca, E. V., Sampaio, S. & Sampaio, P., Jul 12 2012, 27th Annual ACM Symposium on Applied Computing, SAC 2012. p. 1723-1724 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Citations (Scopus)

Characteristic region based image steganography using Speeded-Up Robust Features technique

Hamid, N., Yahya, A., Ahmad, R. B. & Al-Qershi, O., Jul 2 2012, 2012 International Conference on Future Communication Networks, ICFCN 2012. p. 141-146 6 p. 6206858

Research output: Chapter in Book/Report/Conference proceedingConference contribution

10 Citations (Scopus)

Chemical spray pyrolysis path to synthesis of ZnO microsausages from aggregation of elongated double tipped nanoparticles

Muiva, C., Sathiaraj, S. T. & Maabong, K., Jan 30 2012, THERMEC 2011. p. 2577-2582 6 p. (Materials Science Forum; vol. 706-709).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

8 Citations (Scopus)

Comparison of additive manufacturing processes for rapid casting for tooling application using the analytic hierarchy process (AHP)

Nyembwe, K., De Beer, D., Van Der Walt, K., Bhero, S. & Katuku, K., 2012, 42nd International Conference on Computers and Industrial Engineering 2012, CIE 2012. Vol. 1. p. 145-159 15 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Design and development of a microcontroller based neuro fuzzy temperature controller

Ravi, S., Sudha, M. & Balakrishnan, P. A., Nov 26 2012, 2012 International Conference on Informatics, Electronics and Vision, ICIEV 2012. p. 103-107 5 p. 6317541

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Effects of average grain size and misorientation angle on the deformation behaviour of nanocrystalline grain structures

Oladele, S. K. & Samuel, A. A., Dec 1 2012, Materials Science and Technology Conference and Exhibition 2012, MS and T 2012. Vol. 1. p. 693-700 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Embedded concurrent computing architecture using FPGA

Salih, M. H., Ahmad, R. B., Yahya, A. & Arshad, M. R., Dec 1 2012, Proceedings - 2012 7th International Conference on System of Systems Engineering, SoSE 2012. p. 439-444 6 p. 6384129

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)