Botswana International University of Science & Technology

Research Output

Filter
Conference contribution
2008

Interplay of inertia and elasticity, enhanced heat transfer and change of type of vorticity in noncircular tube flow of nonlinear viscoelastic fluids

Siginer, D. A. & Letelier, M. F., Sep 11 2008, The XVth International Congress on Rheology - The Society of Rheology 80th Annual Meeting. Vol. 1027. p. 78-80 3 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Modeling the kinematics of an Autonomous Underwater Vehicle for range-bearing simultaneous localization and Mapping

Matsebe, O., Holtzhausen, S., Kumile, C. M. & Tlale, N. S., 2008, 15th International Conference on Mechatronics and Machine Vision in Practice, M2VIP'08. p. 412-417 6 p. 4749569

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Open middleware for robotics

Namoshe, M., Tlale, N. S., Kumile, C. M. & Bright, G., 2008, 15th International Conference on Mechatronics and Machine Vision in Practice, M2VIP'08. p. 189-194 6 p. 4749531

Research output: Chapter in Book/Report/Conference proceedingConference contribution

8 Citations (Scopus)

Organization of a Health Informatics Research Project

Anderson, G., Mpoeleng, D. & Masizana-Katongo, A., 2008, Proceedings of the Second IASTED Africa Conference on Modelling and Simulation. p. 299-306

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Retrofitted heat exchanger network of a FCC plant

Jara-Morante, E., Morar, M. H., Roman, R. & Agachi, P. S., 2008, CHISA 2008 - 18th International Congress of Chemical and Process Engineering.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sintering and heat-treatment of injection moulded 440K-type martensitic stainless steel compacts

Yousaf Anwar, M., Bhero, S., Messer, P. F. & Davies, H. A., 2008, Proceedings of the Euro International Powder Metallurgy Congress and Exhibition, Euro PM 2008. European Powder Metallurgy Association (EPMA), Vol. 2. p. 215-220 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

The wedding of modified dynamics and non-exotic dark matter in galaxy clusters

Famaey, B., Angus, G. W., Gentile, G., Shan, H. Y. & Zhao, H. S., 2008, Proceedings of the 6th International Heidelberg Conference on Dark Matter in Astroparticle and Particle Physics, Dark 2007. p. 393-401 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Understanding HIV/AIDS Pandemic by high performance Clusters Computing Epidemiology

Masizana-Katongo, A., Mpoeleng, D. & Tau, T., 2008, The second IASTED Africa Conference on Modelling and Simulation. p. 314-324

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2009

Academic research management by means of an integrated software system

Andreica, A. B. & Agachi, P. S., 2009, Proceedings of the IADIS International Conference Informatics 2009, Part of the IADIS Multi Conference on Computer Science and Information Systems, MCCSIS 2009. p. 150-154 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

An acoustical method of predicting permeability of orthotropic fibers

Sharma, S. & Siginer, D. A., Dec 1 2009, 24th Annual Technical Conference of the American Society for Composites 2009 and 1st Joint Canadian-American Technical Conference on Composites. Vol. 2. p. 903-908 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A new Quasi-Cyclic low density parity check codes

Yahya, A., Sidek, O., Salleh, M. F. M. & Ghani, F., Dec 16 2009, 2009 IEEE Symposium on Industrial Electronics and Applications, ISIEA 2009 - Proceedings. Vol. 1. p. 239-242 4 p. 5356472

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

An Expert System for HIV and AIDS Information

Masizana-Katongo, A., Leburu-Dingalo, T. & Mpoeleng, D., 2009, Proceedings of the International Multi-Conference of Engineers and Computer Digital. p. 88-92

Research output: Chapter in Book/Report/Conference proceedingConference contribution

An inverse approach to magnetorheological damper design: Hershel-Bulkley model

Letelier, M. F., Stockle, J. S. & Siginer, D. A., Sep 18 2009, 2008 Proceedings of the ASME Fluids Engineering Division Summer Conference, FEDSM 2008. PART A ed. Vol. 1. p. 201-206 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

An ontology driven approach to software systems composition

Hlomani, H. & Stacey, D., Dec 1 2009, KEOD 2009 - 1st International Conference on Knowledge Engineering and Ontology Development, Proceedings. p. 254-260 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

10 Citations (Scopus)

An Open Source LMS Deployment & Integration Strategy for the University of Botswana

Masizana-Katongo, A., Mpoeleng, D. & Nkgau, T. Z., 2009, Proceedings of the 2nd African Digital Scholarship and Curation Conference.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

CFD simulation of the portal vein blood flow

Botar, C. C., Vasile, T., Sfrangeu, S., Clichici, S., Agachi, P. S., Badea, R., Mircea, P., Cristea, M. V. & Moldovan, R., Dec 1 2009, International Conference on Advancements of Medicine and Health Care through Technology. Vol. 26. p. 359-362 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Determination of physical properties of isotropic porous materials by impedance tube

Sharma, S. & Siginer, D., Dec 1 2009, Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009. PART B ed. Vol. 1. p. 1235-1237 3 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Groupwise pairwise scheme for wireless sensor networks

Anokye, S., Semong, T., Li, Q. & Hu, Q., Nov 20 2009, Proceedings - 2009 International Conference on New Trends in Information and Service Science, NISS 2009. p. 695-699 5 p. 5260950

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Multi-carrier frequency hopping spread spectrum system with girth-six low-density parity-check codes

Ghani, F. & Yahya, A., 2009, 2009 International Multimedia, Signal Processing and Communication Technologies, IMPACT 2009. p. 258-260 3 p. 5164224

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Permeability measurement methods in porous media: A review

Sharma, S. & Siginer, D. A., Sep 15 2009, 2008 Proceedings of ASME International Mechanical Engineering Congress and Exposition, IMECE 2008. PART A ed. Vol. 10. p. 179-200 22 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Permeability measurement of orthotropic fibers under an acoustic force field

Sharma, S. & Siginer, D., Dec 1 2009, Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009. PART B ed. Vol. 1. p. 1231-1233 3 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Row division method to generate QC-LDPC codes

Yahya, A., Sidek, O., Salleh, M. F. M. & Ghani, F., Oct 13 2009, Proceedings of the 2009 5th Advanced International Conference on Telecommunications, AICT 2009. p. 183-187 5 p. 5072428

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Rumor as an energy-balancing multipath routing protocol for wireless sensor networks

Semong, T., Anokye, S., Li, Q. & Hu, Q., Nov 20 2009, Proceedings - 2009 International Conference on New Trends in Information and Service Science, NISS 2009. p. 754-759 6 p. 5260898

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Spheroidisation and oxide disruption phenomena in direct selective laser melting (SLM) of pre-alloyed Al-Mg and Al-Si powders

Olakanmi, E. O., Cochrane, R. F. & Dalgarno, K. W., Oct 5 2009, TMS 2009 - 138th Annual Meeting and Exhibition - Supplemental Proceedings. Vol. 1. p. 371-380 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Citations (Scopus)

Structural behaviour of beams under simultaneous load and steel corrosion

Malumbela, G., Moyo, P. & Alexander, M., 2009, Concrete Repair, Rehabilitation and Retrofitting II - Proceedings of the 2nd International Conference on Concrete Repair, Rehabilitation and Retrofitting, ICCRRR. p. 253-254 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

System model performance coupled with DPSK modulation over flat rayleigh fading channels

Sidek, O., Yahya, A. & Salleh, M. F. M., 2009, Proceedings of the 2009 5th Advanced International Conference on Telecommunications, AICT 2009. p. 194-197 4 p. 5072430

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Thermodynamic data for volatile organic compounds in poly(dimethylsiloxane) by gas liquid chrmatography

Muzenda, E., Belaid, M., Arrowsmith, A. & Ashton, N., 2009, 8th World Congress of Chemical Engineering: Incorporating the 59th Canadian Chemical Engineering Conference and the 24th Interamerican Congress of Chemical Engineering.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Thermodynamics of volatile organic compounds in PDMS by simple modified headspace method

Muzenda, E., Belaid, M. & Arrowsmith, A., 2009, 8th World Congress of Chemical Engineering: Incorporating the 59th Canadian Chemical Engineering Conference and the 24th Interamerican Congress of Chemical Engineering.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Unsaturated and saturated flow in the VARTM process- An investigation

Sharma, S., Siginer, D. A., Dukipatti, R. K. & Soschinske, K. A., Dec 1 2009, 24th Annual Technical Conference of the American Society for Composites 2009 and 1st Joint Canadian-American Technical Conference on Composites. Vol. 2. p. 867-872 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2010

An SMS-based healthcare information storage and retrieval system

Masizana-Katongo, A. N., Anderson, G., Mpoeleng, D., Taukobong, T., Mosweunyane, G., Eyitayo, O. T. & Gopolang, B., 2010, Proceedings of the IASTED African Conference on Health Informatics, AfricaHI 2010. p. 217-222 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Assessment of solar-coal hybrid electricity power generating systems

Oladiran, M. T., Kiravu, C. & Plumb, O. A., Dec 1 2010, Proceedings of the 3rd IASTED African Conference on Power and Energy Systems, AfricaPES 2010. p. 74-82 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Building an expert system for HIV and aids information

Masizana-Katongo, A., Leburu-Dingalo, T. & Mpoeleng, D., Jul 1 2010, Electronic Engineering and Computing Technology. Springer International Publishing AG, p. 323-333 11 p. (Lecture Notes in Electrical Engineering; vol. 60 LNEE).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Complex pressure pulses in micro-channels magnetically induced

Leteller, M. F., Stockle, J. S., Siginer, D. A. & Ulloa, F. A., Jan 1 2010, Proceedings of the ASME International Mechanical Engineering Congress and Exposition 2009, IMECE 2009. PART A ed. American Society of Mechanical Engineers (ASME), Vol. 9. p. 81-90 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of substrates on the microstructure of thermally sprayed WC-4.88 wt% Co coatings

Oladijo, O. P., Venter, A. M., Cornish, L. A., Sacks, N. & Shrivastava, S., 2010, Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010. European Powder Metallurgy Association (EPMA), Vol. 3.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Energy attenuation capability of woven natural silk (WNS)/epoxy composites plates subjected to drop-weight impacts

Ude, A. U., Sopian, K. & Azhari, C. H., May 28 2010, TMS 2010 - 139th Annual Meeting and Exhibition - Supplemental Proceedings. Vol. 2. p. 115-122 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Fabrication and characterization of spray pyrolysed inxsy thin films for cuins2 solar cells

Maabong, K. & Muiva, C., 2010, Proceedings of the 3rd IASTED African Conference on Power and Energy Systems, AfricaPES 2010. p. 22-28 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Flow instabilities and heat transfer in buoyancy driven flows of inelastic non-Newtonian fluids in inclined rectangular cavities

Siginer, D. & Khezzar, L., Dec 1 2010, ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting Collocated with 8th International Conference on Nanochannels, Microchannels, and Minichannels, FEDSM2010. PARTS A, B AND C ed. Vol. 1. p. 1411-1420 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heat transfer asymptote in laminar tube flows of non-linear viscoelastic fluids

Siginer, D. A., Dec 1 2010, 2010 14th International Heat Transfer Conference, IHTC 14. Vol. 2. p. 839-852 14 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heat transfer enhancement in corrugated pipes

Siginer, D. A. & Akyildiz, F. T., Dec 1 2010, 2010 14th International Heat Transfer Conference, IHTC 14. Vol. 2. p. 853-860 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Magnitudes of coupling coefficients of horizontal and vertical slots in a dual mode filter

Pholele, T. M. & Chuma, J. M., 2010, Proceedings of the 3rd IASTED African Conference on Modelling and Simulation, AfricaMS 2010. p. 1-4 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Modelling and control of an anfis temperature controller for plastic extrusion process

Ravi, S. & Balakrishnan, P. A., Dec 1 2010, 2010 IEEE International Conference on Communication Control and Computing Technologies, ICCCCT 2010. p. 314-320 7 p. 5670572

Research output: Chapter in Book/Report/Conference proceedingConference contribution

18 Citations (Scopus)

Natural convection with non-Newtonian shear-thinning power law fluids in inclined two dimensional rectangular cavities

Khezzar, L. & Siginer, D., Jan 1 2010, Proceedings of the ASME International Mechanical Engineering Congress and Exposition 2009, IMECE 2009. PART A ed. American Society of Mechanical Engineers (ASME), Vol. 9. p. 141-145 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Plastic flow establishment in circular pipes under the effect of a magnetic field

Stockle, J. S., Letelier, M. F., Siginer, D. A. & Maria, J. A., 2010, ASME 2010 International Mechanical Engineering Congress and Exposition, IMECE 2010. PARTS A AND B ed. Vol. 7. p. 627-633 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Simulating the hydrology and water resources of large basins in southern Africa

Hughes, D. A., Tshimanga, R. & Tirivarombo, S., 2010, Global Change: Facing Risks and Threats to Water Resources. Vol. 340. p. 591-597 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Vartm process improvement for repeatable and improved mechanical properties of composite laminates

Sharma, S. & Siginer, D. A., Jan 1 2010, Proceedings of the ASME International Mechanical Engineering Congress and Exposition 2009, IMECE 2009. PART A ed. American Society of Mechanical Engineers (ASME), Vol. 9. p. 45-50 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2011

2D matrix array optimization by simulated annealing for 3D hepatic imaging

Diarra, B., Liebgott, H., Tortoli, P. & Cachard, C., 2011, 2011 IEEE International Ultrasonics Symposium, IUS 2011. p. 1595-1598 4 p. 6293075

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Citations (Scopus)

A knowledge identification framework for the engineering of ontologies in system composition processes

Gillespie, M. G., Hlomani, H., Kotowski, D. & Stacey, D. A., 2011, Proceedings of the 2011 IEEE International Conference on Information Reuse and Integration, IRI 2011. p. 77-82 6 p. 6009524

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Analysis of plug zones in steady flow in undulating channels

Letelier, M. F., Svensson, P., Siginer, D. A. & Stockle, J. S., Dec 1 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011. PARTS A AND B ed. Vol. 6. p. 217-222 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

A new interconnection structure method for QC-LDPC codes

Ghani, F., Yahya, A., Kader, M. A. & Islam, M. A., Dec 1 2011, 2011 International Conference on Multimedia, Signal Processing and Communication Technologies, IMPACT 2011. p. 114-117 4 p. 6150451

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ant based routing protocol for visual sensors

Zungeru, A. M., Ang, L. M., Prabaharan, S. R. S. & Seng, K. P., Dec 12 2011, Informatics Engineering and Information Science - International Conference, ICIEIS 2011, Proceedings. PART 2 ed. p. 250-264 15 p. (Communications in Computer and Information Science; vol. 252 CCIS, no. PART 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

15 Citations (Scopus)