Botswana International University of Science & Technology

Research Output

Filter
Conference contribution

Case-based reasoning system for predicting the sustainability of a telecentre

Ayoung, A. D., Sigweni, B. & Abbott, P., Feb 17 2016, 2015 10th International Conference for Internet Technology and Secured Transactions, ICITST 2015. Institute of Electrical and Electronics Engineers Inc., p. 125-130 6 p. 7412072

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

CFD simulation of the portal vein blood flow

Botar, C. C., Vasile, T., Sfrangeu, S., Clichici, S., Agachi, P. S., Badea, R., Mircea, P., Cristea, M. V. & Moldovan, R., Dec 1 2009, International Conference on Advancements of Medicine and Health Care through Technology. Vol. 26. p. 359-362 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Characterisation of the residual stresses in HVOF WC-CO coatings and substrates

Venter, A. M., Oladijo, O. P., Cornish, L. A. & Sacks, N., 2014, International Conference on Residual Stresses 9 (ICRS 9). Vol. 768-769. p. 280-285 6 p. (Materials Science Forum; vol. 768-769).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Characteristic region based image steganography using Speeded-Up Robust Features technique

Hamid, N., Yahya, A., Ahmad, R. B. & Al-Qershi, O., Jul 2 2012, 2012 International Conference on Future Communication Networks, ICFCN 2012. p. 141-146 6 p. 6206858

Research output: Chapter in Book/Report/Conference proceedingConference contribution

10 Citations (Scopus)

Characterization and kinetics of biofuel produced from waste cooking oil

Emeji, I. C., Afolabi, A. S., Abdulkareem, A. S. & Kalala, J., Jan 1 2015, WCECS 2015 - World Congress on Engineering and Computer Science 2015. Douglas, C., Burgstone, J., Grundfest, W. S., Burgstone, J., Douglas, C. & Ao, S. I. (eds.). Newswood Limited, Vol. 2220. p. 589-592 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Characterization of sintered boron suboxide with nickel compounds

Johnson, O. T., Ogunmuyiwa, E. N., Sigalas, I. & Afolabi, A. S., Jan 1 2015, WCE 2015 - World Congress on Engineering 2015. Ao, S. I., Gelman, L., Gelman, L., Hukins, D. W. L., Hunter, A., Korsunsky, A. M., Ao, S. I. & Ao, S. I. (eds.). Newswood Limited, Vol. 2218. p. 752-756 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Chemical spray pyrolysis path to synthesis of ZnO microsausages from aggregation of elongated double tipped nanoparticles

Muiva, C., Sathiaraj, S. T. & Maabong, K., Jan 30 2012, THERMEC 2011. p. 2577-2582 6 p. (Materials Science Forum; vol. 706-709).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

8 Citations (Scopus)

Comparison of additive manufacturing processes for rapid casting for tooling application using the analytic hierarchy process (AHP)

Nyembwe, K., De Beer, D., Van Der Walt, K., Bhero, S. & Katuku, K., 2012, 42nd International Conference on Computers and Industrial Engineering 2012, CIE 2012. Vol. 1. p. 145-159 15 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Comparison of different optimized irregular sparse 2D ultrasound arrays

Diarra, B., Roux, E., Liebgott, H., Ravi, S., Robini, M., Tortoli, P. & Cachard, C., Nov 1 2016, 2016 IEEE International Ultrasonics Symposium, IUS 2016. IEEE Computer Society, Vol. 2016-November. 7728414

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Complex pressure pulses in micro-channels magnetically induced

Leteller, M. F., Stockle, J. S., Siginer, D. A. & Ulloa, F. A., Jan 1 2010, Proceedings of the ASME International Mechanical Engineering Congress and Exposition 2009, IMECE 2009. PART A ed. American Society of Mechanical Engineers (ASME), Vol. 9. p. 81-90 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Concept Development for Reconfigurable Bending Press Tools' (RBPTs) Modules Using a Novel Methodology

Gwangwava, N., Mpofu, K., Tlale, N. & Yu, Y., Jan 1 2013, 11th IFAC Workshop on Intelligent Manufacturing Systems, IMS 2013. 7 ed. IFAC Secretariat, Vol. 46. p. 354-359 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Conductor disc used to suppress spurious mode and enhance electric coupling in a dielectric loaded combline resonator

Pholele, T. M. & Chuma, J. M., Nov 9 2015, 2015 IEEE Radio and Antenna Days of the Indian Ocean, RADIO 2015. Institute of Electrical and Electronics Engineers Inc., 7323396

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Conduit flow control through magnetorheology

Letelier, M. F., Stockle, J. S. & Siginer, D. A., Dec 1 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011. PARTS A AND B ed. Vol. 6. p. 211-216 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Conjunctive use of geophysical techniques in optimizing the groundwater potential in the Kunyere and Gomoti areas of the Okavango Delta, Botswana

Shemang, E. M., Molwalefhe, L. N. & Ntsatsi, J., 2006, 19th Symposium on the Application of Geophysics to Engineering and Environmental Problems, SAGEEP 2006: Geophysical Applications for Environmental and Engineering Hazzards - Advances and Constraints. Vol. 1. p. 871-885 15 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Constitutive theory for macromolecular media

Siginer, D. A. & Yanovsky, Y. G., 1993, Developments in Non - Newtonian Flows. Siginer, D. A., VanArsdale, W. E., Altan, C. M. & Alexandrou, A. N. (eds.). Publ by ASME, Vol. 175. p. 35 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Continuous decontamination of metal-polluted mine water using engineered hybrid adsorbent

Muliwa, A. M., Onyango, M. S., Maity, A. & Ochieng, A., 2018, Proceedings of the 2018 Annual Sustainable Research and Innovation (SRI) Conference. Kenya, p. 155-158 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

Contributing evidence to data-driven ontology evaluation workflow ontologies perspective

Hlomani, H. & Stacey, D. A., Nov 21 2013, IC3K 2013; KEOD 2013 - 5th International Conference on Knowledge Engineering and Ontology Development, Proceedings. p. 207-213 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Controlled surface treatment of mild steel with carbon nanotubes at austenitic temperature

Afolabi, A. S., Hassan, A. S. & Daramola, M. O., Jan 1 2015, WCECS 2015 - World Congress on Engineering and Computer Science 2015. Douglas, C., Burgstone, J., Grundfest, W. S., Burgstone, J., Douglas, C. & Ao, S. I. (eds.). Newswood Limited, Vol. 2220. p. 614-618 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Coordinated multicell beamforming with local and global data rate constraints

Elsabae, R., Basutli, B., Ghanem, K., Gong, Y. & Lambotharan, S., Nov 28 2016, 2016 24th European Signal Processing Conference, EUSIPCO 2016. European Signal Processing Conference, EUSIPCO, Vol. 2016-November. p. 1388-1392 5 p. 7760476

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Correspondence between experiment and theory of bulk electrocrystallisation at solid electrodes in aqueous electrolyte

Andersen, J. E. T., 2008, ECS Transactions - Molecular Structure of the Solid-Liquid Interface and its Relationship to Electrodeposition 6 - 214th ECS Meeting. 46 ed. Vol. 16. p. 25-35 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Corrosion behaviour of mild steel in biodiesel prepared from ghee butter

Ononiwu, G. I., Adams, F. V., Joseph, I. V. & Afolabi, A. S., Jan 1 2015, WCE 2015 - World Congress on Engineering 2015. Ao, S. I., Gelman, L., Gelman, L., Hukins, D. W. L., Hunter, A., Korsunsky, A. M., Ao, S. I. & Ao, S. I. (eds.). Newswood Limited, Vol. 2218. p. 858-862 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Corrosion cracking of a mild steel in orange juice

Afolabi, A. S., Ngwenya, T. G., Sanusi, K. O. & Abdulkareem, A. S., Nov 25 2013, Proceedings of the World Congress on Engineering 2013, WCE 2013. Vol. 1 LNECS. p. 512-515 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dam phreatic line simulation on FLAC3D: A case study

Huang, G. H., Wang, H. & Adoko, A. C., Sep 3 2013, Advances in Civil and Industrial Engineering. p. 407-410 4 p. (Applied Mechanics and Materials; vol. 353-354).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Data-driven diachronic and categorical evaluation of ontologies: Framework, measure, and metrics

Hlomani, H. & Stacey, D. A., Jan 1 2014, KEOD 2014 - Proceedings of the International Conference on Knowledge Engineering and Ontology Development. Filipe, J., Dietz, J., Filipe, J. & Aveiro, D. (eds.). INSTICC Press, p. 56-66 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Data size reduction and maximization of the network lifetime over wireless sensor network

Kuthadi, V. M., Selvaraj, R. & Marwala, T., Jan 1 2016, Information Systems Design and Intelligent Applications - Proceedings of 3rd International Conference, INDIA 2016. Mandal, J. K., Bhateja, V., Udgata, S. K. & Satapathy, S. C. (eds.). Springer Verlag, p. 731-750 20 p. (Advances in Intelligent Systems and Computing; vol. 433).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Design, environmental and sustainability constraints of new African observatories: The example of the Mozambique Radio Astronomy Observatory

Barbosa, D., Bergano, M., Ribeiro, V. A. R. M., Loots, A., Thondikulam, V. L., Gaylard, M., Van Ardenne, A., Paulo, C., Colafrancesco, S., Amador, J. C., Maia, R. & Melo, R., Jan 1 2013, IEEE AFRICON 2013. Institute of Electrical and Electronics Engineers Inc., 6757829

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Design, test and implementation of a single piston rotary valve engine control unit

Zibani, I. B., Chuma, J. M. & Marumo, J., Jan 1 2014, 19th IFAC World Congress IFAC 2014, Proceedings. Xia, X. & Boje, E. (eds.). IFAC Secretariat, Vol. 19. p. 5665-5670 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Design and development of a microcontroller based neuro fuzzy temperature controller

Ravi, S., Sudha, M. & Balakrishnan, P. A., Nov 26 2012, 2012 International Conference on Informatics, Electronics and Vision, ICIEV 2012. p. 103-107 5 p. 6317541

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Design and development of MATLAB based three phase converter for unbalanced AC source with enhancement in power control

Aiswarya, S., Ravi, S., Kumarakrishnan, V. & Mezhuyev, V., Oct 5 2015, Proceedings of the IEEE International Conference on Soft-Computing and Network Security, ICSNS 2015. Institute of Electrical and Electronics Engineers Inc., 7292376

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Design and development of MATLAB Simulink based Selective Harmonic Elimination technique for three phase voltage source inverter

Rajpriya, G., Ravi, S. & Zaidi, A. M. A., Jan 1 2014, ICACCS 2013 - Proceedings of the 2013 International Conference on Advanced Computing and Communication Systems: Bringing to the Table, Futuristic Technologies from Around the Globe. Institute of Electrical and Electronics Engineers Inc., 6938734

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Design and development of maximum power point tracking in wind power optimization using fuzzy PLL controller

Govindaraj, T., Ravi, S. & Balakrishnan, P. A., Aug 8 2013, 2013 IEEE International Conference on Emerging Trends in Computing, Communication and Nanotechnology, ICE-CCN 2013. p. 384-389 6 p. 6528528

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Design and implementation of an integrated software system for managing research activities in Universities

Andreica, A. B. & Agachi, P. S., 2008, 7th RoEduNet International Conference, RoEduNet 2008. EDITURA U T PRESS

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Designing a model of a full control module for a camless engine employing rotary valves

Zibani, I., Chuma, J. & Marumo, R., Jan 1 2013, IEEE AFRICON 2013. Institute of Electrical and Electronics Engineers Inc., 6757724

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Design of an educational electronic game system

Mtengi, B., Zungeru, A. M., Maphane, P. & Chuma, J., Sep 25 2019, Proceedings of 2019 2nd International Conference on Electronics and Electrical Engineering Technology, EEET 2019 - Workshop 2019 3rd International Conference on Biomedical Engineering and Bioinformatics, ICBEB 2019. Association for Computing Machinery, p. 1-6 6 p. (ACM International Conference Proceeding Series).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Design of an enhanced hit the target game

Mtengi, B., Zungeru, A. M., Bakary, D. & Chuma, J., Sep 25 2019, Proceedings of 2019 2nd International Conference on Electronics and Electrical Engineering Technology, EEET 2019 - Workshop 2019 3rd International Conference on Biomedical Engineering and Bioinformatics, ICBEB 2019. Association for Computing Machinery, p. 37-41 5 p. (ACM International Conference Proceeding Series).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Design of a short range optical pulse transceiver system for intruder detection

Basutli, B., Zungeru, A. M., Mtengi, B. & Diarra, B., Sep 25 2019, Proceedings of 2019 2nd International Conference on Electronics and Electrical Engineering Technology, EEET 2019 - Workshop 2019 3rd International Conference on Biomedical Engineering and Bioinformatics, ICBEB 2019. Association for Computing Machinery, p. 68-73 6 p. (ACM International Conference Proceeding Series).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Design of locomotive location indicator communication system

Oranye, N., Masupe, S., Chuma, J. M. & Sebusang, S. E. M., 2004, 2004 IEEE AFRICON: 7th AFRICON Conference in Africa: Technology Innovation. Vol. 2. p. 1269-1273 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Determination of physical properties of isotropic porous materials by impedance tube

Sharma, S. & Siginer, D., Dec 1 2009, Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009. PART B ed. Vol. 1. p. 1235-1237 3 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Developing the ground index (GI) for rock collapse assessment in tunneling

Adoko, A. C., Wang, H., Jiao, Y. Y. & Seitshiro, I. T., Jan 1 2016, 50th US Rock Mechanics / Geomechanics Symposium 2016. American Rock Mechanics Association (ARMA), Vol. 1. p. 102-111 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Development and characterization of beverages from tigernut milk, pineapple and coconut fruit extracts

Abdulfatai, J., Saka, A. A., Afolabi, A. S. & Diana, K., Jan 31 2013, Mechanical Materials and Manufacturing Engineering II. p. 304-309 6 p. (Applied Mechanics and Materials; vol. 248).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development of adsorbent from banana peel for wastewater treatment

Abdulfatai, J., Saka, A. A., Afolabi, A. S. & Micheal, O., 2013, Mechanical Materials and Manufacturing Engineering II. Vol. 248. p. 310-315 6 p. (Applied Mechanics and Materials; vol. 248).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Citations (Scopus)

Development of efficient image quarrying technique for Mammographic image classification to detect breast cancer with supervised learning algorithm

Antony, S. J. S. & Ravi, S., Jan 1 2014, ICACCS 2013 - Proceedings of the 2013 International Conference on Advanced Computing and Communication Systems: Bringing to the Table, Futuristic Technologies from Around the Globe. Institute of Electrical and Electronics Engineers Inc., 6938688

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development of VC-Ni eutectic alloys for wear resistance

Apata, O. A., Muobeleni, T. N., Fabuyide, A. A., Ogunmuyiwa, E. N., Rading, G. O., Jain, P. K., Witcomb, M. J. & Cornish, L. A., Jan 1 2014, AMI Light Metals Conference 2014. Curle, U. A. & Möller, H. (eds.). Trans Tech Publications Ltd, p. 347-354 8 p. (Advanced Materials Research; vol. 1019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Distributed beamformer design under mixed SINR balancing and SINR-target-constraints

Basutli, B. & Lambotharan, S., Sep 9 2015, 2015 IEEE International Conference on Digital Signal Processing, DSP 2015. Institute of Electrical and Electronics Engineers Inc., Vol. 2015-September. p. 530-534 5 p. 7251929

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Earthworms as engineers of soil and human health

Agbenyeku, E. E. O., Muzenda, E. & Msibi, I. M., Jan 1 2015, WCECS 2015 - World Congress on Engineering and Computer Science 2015. Douglas, C., Burgstone, J., Grundfest, W. S., Burgstone, J., Douglas, C. & Ao, S. I. (eds.). Newswood Limited, Vol. 2220. p. 646-650 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Economic analysis of biogas upgrading and utilization as vehicular fuel in South Africa

Masebinu, S. O., Aboyade, A. O. & Muzenda, E., Jan 1 2015, WCECS 2015 - World Congress on Engineering and Computer Science 2015. Douglas, C., Burgstone, J., Grundfest, W. S., Burgstone, J., Douglas, C. & Ao, S. I. (eds.). Newswood Limited, Vol. 2220. p. 579-588 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Economic optimization of a thermal cracker via model predictive control technology

Savu, A. R., Muntean, I., Lazea, G. & Agachi, P. S., Sep 8 2011, 2011 19th Mediterranean Conference on Control and Automation, MED 2011. p. 819-824 6 p. 5983153

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Effect and control of suspended solids at the blast furnaces

Afolabi, A. S., Sanusi, K. O., Abdulkareem, A. S. & Bada, O. S., Jan 31 2013, Energy, Environment and Sustainable Development. p. 954-960 7 p. (Applied Mechanics and Materials; vol. 261-262).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effective transportation technology transfer operations for economic development in Botswana

Oladele, A. S., 2014, Advances in Transportation. Vol. 505-506. p. 493-496 4 p. (Applied Mechanics and Materials; vol. 505-506).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of flotation parameters on recovery of South Africa nickel sulphide ore

Afolabi, A. S., Abdulkareem, A. S. & Muzenda, E., Jan 31 2013, Energy, Environment and Sustainable Development. p. 961-968 8 p. (Applied Mechanics and Materials; vol. 261-262).

Research output: Chapter in Book/Report/Conference proceedingConference contribution