Botswana International University of Science & Technology

Research Output

Article

Densification mechanism and microstructural evolution in selective laser sintering of Al-12Si powders

Olakanmi, E. O., Cochrane, R. F. & Dalgarno, K. W., Jan 1 2011, In : Journal of Materials Processing Technology. 211, 1, p. 113-121 9 p.

Research output: Contribution to journalArticle

78 Citations (Scopus)

Deployment of IoV for Smart Cities: Applications, Architecture and Challenges

Ang, L. M., Seng, K. P., Ijemaru, G. & Zungeru, A. M., Dec 17 2018, In : IEEE Access. 19 p.

Research output: Contribution to journalArticle

Open Access
18 Citations (Scopus)

Deposition mechanism and microstructure of laser-assisted cold-sprayed (LACS) Al-12 wt.%Si coatings: Effects of laser power

Olakanmi, E. O., Tlotleng, M., Meacock, C., Pityana, S. & Doyoyo, M., Jun 1 2013, In : JOM. 65, 6, p. 776-783 8 p.

Research output: Contribution to journalArticle

14 Citations (Scopus)

Design and Construction of an Automatic Triggered Bell Ringer Circuit

Kelechi, I. G., Zungeru, A. M., Sandra, Y., Babarinde, A. K. & Oluwafemi, O. K., 2014, In : Innovative Systems Design and Engineering. 5, 12, p. 91-98 8 p.

Research output: Contribution to journalArticle

Open Access

Design and Construction of a Remote Controlled Power Supply Unit

Ahmed, M. S., Zungeru, A. M. & Kolo, J. G., 2007, In : Leonardo Journal of Sciences. 11, p. 41-50

Research output: Contribution to journalArticle

Open Access
Open Access

Design and development of microcontroller based selective harmonic elimination technique for three phase voltage source inverter

Ravi, S., Rajpriya, G. & Kumarakrishnan, V., Jan 1 2015, In : International Journal of Applied Engineering Research. 10, 13, p. 11562-11578 17 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Design and Implementation of A Directional Object Sensing and Ranging System

Zungeru, A. M., Mahmood, I., Mmonyi, A. C. & Obikoya, G. D., 2014, In : Network and Complex Systems. 4, 8, p. 1-12 12 p.

Research output: Contribution to journalArticle

Open Access

Design and Implementation of a Generator Power Sensor and Shutdown Timer

Obikoya, G. D., Zungeru, A. M., Mmonyi, A. C. & Hayatuddeen, T., 2014, In : Innovative Systems Design and Engineering. 5, 10, p. 1-6 6 p.

Research output: Contribution to journalArticle

Open Access
Open Access

Design and implementation of a low cost digital bus passenger counter

Zungeru, A. M., Deborah, M. K., Garba, A. J. & Tola, O. J., 2012, In : Innovative Systems Design and Engineering. 3, 4, p. 29-40 13 p.

Research output: Contribution to journalArticle

Open Access

Design and implementation of a microcontroller based buck boost converter as a smooth starter for permanent magnet motor

Ravi, S., Mezhuyev, V., Iyswarya Annapoorani, K. & Sukumar, P., Mar 1 2016, In : Indonesian Journal of Electrical Engineering and Computer Science. 1, 3, p. 566-574 9 p.

Research output: Contribution to journalArticle

10 Citations (Scopus)

Design and implementation of a microcontroller based buck boost converter as a smooth starter for permanent magnet motor

Ravi, S., Mezhuyev, V., Iyswarya Annapoorani, K. & Sukumar, P., Jan 1 2016, In : Telkomnika (Telecommunication Computing Electronics and Control). 1, 3, p. 566-574 9 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Design and implementation of a short message service (SMS) based remote controller

Zungeru, A. M., Edu, U. V. & Garba, A. J., 2012, In : Computer Engineering and Intelligent Systems . 3, 4, p. 106-118 14 p.

Research output: Contribution to journalArticle

Open Access

Design and implementation of Bridgeless Cuk Converter for controlled BLDC motor

Ahmed, S. F., Iyswarya Annapoorani, K. & Ravi, S., Jan 1 2016, In : International Journal of Control Theory and Applications. 9, 2, p. 821-832 12 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Design and implementation of security in healthcare cloud computing

Gorata, M., Zungeru, A. M., Mangwala, M. & Chuma, J., 2017, In : Journal of Computer Science. 13, 2, p. 34-47 14 p.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)

Design and Modelling of a Solar Water Heating System

Kelechi, I. G., Zungeru, A. M., Ayobami, O. E., Habibu, H. & Olugbenga, A. F., 2014, In : Industrial Engineering Letters. 4, 12, p. 70-79 10 p.

Research output: Contribution to journalArticle

Open Access

Design and simulation of an automatic room heater control system

Zungeru, A. M., Mangwala, M., Chuma, J., Gaebolae, B. & Basutli, B., 2018, In : Heliyon. 4, 6

Research output: Contribution to journalArticle

Open Access
4 Citations (Scopus)

Design and simulation of a weather activated window system

Zungeru, A. M., Chuma, J., Mangwala, M. & Tlhabiwe, L. R., 2017, In : International Journal of Applied Engineering Research. 12, 20, p. 10189-10196 8 p.

Research output: Contribution to journalArticle

Open Access
2 Citations (Scopus)

Designing Effective Legends and Layouts with a Focus on Nigerian Topographic Maps

Akinyemi, F. O., Kibora, P. M. & Aborishade, P., 2013, In : Cartographica. 48, 1, p. 1-12 12 p.

Research output: Contribution to journalArticle

Designing of sampling programmes for industrial effluent monitoring

Ntuli, F., Kuipa, P. K. & Muzenda, E., Jan 1 2011, In : Environmental Science and Pollution Research. 18, 3, p. 479-484 6 p.

Research output: Contribution to journalArticle

7 Citations (Scopus)

Design of a GSM-Based Biometric Access Control System

Habibu, H., Zungeru, A. M., Susan, A. A., Kelechi, I. G. & Oluwatosin, O. B., 2014, In : Control Theory and Informatics. 4, 8, p. 1-20 20 p.

Research output: Contribution to journalArticle

Open Access

Design of an elliptic function bandpass filter using a high dielectric ring resonator

Chuma, J. M., Mar 2005, In : SAIEE Africa Research Journal. 96, 2, p. 117-120 4 p.

Research output: Contribution to journalArticle

Design of a Smart Embedded Uninterrupted Power Supply System for Personal Computer

Zungeru, A. M., Garba, A. J., Kolo, J. G., Ahmed, M. S. & Olumide, I., 2012, In : International Journal of Embedded Systems and Applications (IJESA). 2, 4, p. 1-19 19 p.

Research output: Contribution to journalArticle

Open Access

Design of Integrated Gasification Combined Cycle plant with Carbon Capture and Storage based on co-gasification of coal and biomass

Maxim, V., Cormos, C. C. & Agachi, P. S., Jun 20 2011, In : Computer Aided Chemical Engineering. 29, p. 1904-1908 5 p.

Research output: Contribution to journalArticle

6 Citations (Scopus)

Design of intelligent self-tuning GA ANFIS temperature controller for plastic extrusion system

Ravi, S., Sudha, M. & Balakrishnan, P. A., Nov 24 2011, In : Modelling and Simulation in Engineering. 2011, 101437.

Research output: Contribution to journalArticle

38 Citations (Scopus)

Design of optimal 2-d nongrid sparse arrays for medical ultrasound

Diarra, B., Robini, M., Tortoli, P., Cachard, C. & Liebgott, H., Nov 4 2013, In : IEEE Transactions on Biomedical Engineering. 60, 11, p. 3093-3102 10 p., 6529099.

Research output: Contribution to journalArticle

50 Citations (Scopus)

Design of synthetic optimizing neuro fuzzy temperature controller for dual screw profile plastic extruder using labview

Samikannu, R. & Poonamallie, B. A., 2011, In : Journal of Computer Science. 7, 5, p. 671-677 7 p.

Research output: Contribution to journalArticle

11 Citations (Scopus)

Design of Synthetic Optimizing Neuro Fuzzy Temperature Controller for Twin Screw Profile Plastic Extruder Using Labview

Ravi, S., Balakrishnan, P. A., Marimuthu, C. N. & Sujitha, C., Jan 1 2014, In : Intelligent Automation and Soft Computing. 20, 1, p. 92-100 9 p.

Research output: Contribution to journalArticle

8 Citations (Scopus)
Open Access
3 Citations (Scopus)

Detailed assessment of platinum-group minerals associated with chromitite stringers in the merensky reef of the eastern bushveld complex, South Africa

Rose, D., Viljoen, F., Knoper, M. & Rajesh, H., Dec 1 2011, In : Canadian Mineralogist. 49, 6, p. 1385-1396 12 p.

Research output: Contribution to journalArticle

12 Citations (Scopus)

Detection and molecular characterisation of group A rotavirus from children in northern Botswana

Kebaabetswe, L. P., Sebunya, T. K., Matsheka, M. I. & Ndung'u, T., Apr 2005, In : East African Medical Journal. 82, 4, p. 203-208 6 p.

Research output: Contribution to journalArticle

10 Citations (Scopus)

Detection of changes in rainfall and runoff patterns

Lungu, E. M., Jun 15 1993, In : Journal of Hydrology. 147, 1-4, p. 153-167 15 p.

Research output: Contribution to journalArticle

6 Citations (Scopus)

Detection of masses in digital mammograms using K-means and neural network

Julian Savari Antony, S. & Ravi, S., Jan 1 2015, In : International Journal of Applied Engineering Research. 10, 7, p. 17643-17656 14 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)
Open Access
7 Citations (Scopus)

Determination of Chemical Homogeneity of Fire Retardant Polymeric Nanocomposite Materials by Near-Infrared Multispectral Imaging Microscopy

Duri, S., Majoni, S., Hossenlopp, J. M. & Tran, C. D., Jul 6 2010, In : Analytical Letters. 43, 10-11, p. 1780-1789 10 p.

Research output: Contribution to journalArticle

Open Access
7 Citations (Scopus)

Determination of fluoride in vegetation: A review of modern techniques

Cooke, J. A., Johnson, M. S. & Davison, A. W., Jan 1 1976, In : Environmental Pollution (1970). 11, 4, p. 257-268 12 p.

Research output: Contribution to journalArticle

23 Citations (Scopus)

Determination of global absorptivity and emissivity of some opaque bulk materials using an integrating sphere calorimeter without ports

Ochieng, R. M., Onyango, F. N. & Owino, A. J., Aug 1 2007, In : Measurement Science and Technology. 18, 8, p. 2667-2672 6 p., 043.

Research output: Contribution to journalArticle

2 Citations (Scopus)
7 Citations (Scopus)
5 Citations (Scopus)

Determination of surface stoichiometry in polycrystalline alloys by a crystallographic electron attenuation model: Application to the Ce/Rh system

Andersen, J. E. T., Warren, J. P., Zhang, X. & Lambert, R. M., Jan 1 1994, In : Surface and Interface Analysis. 21, 8, p. 576-580 5 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Determination of the cutting resistance model of soil

Szymanski, J. K., Balideh, S., Suglo, R. S. & Planeta, S., Nov 2011, In : International Journal of Mining and Mineral Engineering. 3, 3, p. 220-232 13 p.

Research output: Contribution to journalArticle

Determination of the Most Effective Concentration of Deet and Permethrin in A Mosquito Repellent Soap and Assay of the Active Ingredients

Mtisi, F., Parekh, C. T., Ochieng, A. & Chiririwa, H., 2016, In : International Journal of Applied Chemistry. 12, 2, p. 95-105 11 p.

Research output: Contribution to journalArticle

Open Access

Determining an optimal interstitial filling condition: An Attainable Region approach

Hlabangana, N., Danha, G., Mguni, N. G., Madiba, M. S. & Bhondayi, C., 2018, In : Powder Technology. 327, p. 9-16 8 p.

Research output: Contribution to journalArticle

Open Access
4 Citations (Scopus)

Determining Optimal Blocking Sizes for Large Exam Groups When Data Matching

Anderson, G., Masizana-Katongo, A. & Mpoeleng, D., 2014, In : International Journal on Information Technology . 2, 3, p. 80-86 7 p.

Research output: Contribution to journalArticle

Determining the PGM bearing mineral phase in the UG2 ore

Danha, G., Bhondayi, C., Hlabangana, N. & Hildebrandt, D., Jun 15 2017, In : Powder Technology. 315, p. 236-242 7 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)
Open Access
2 Citations (Scopus)
Open Access

Development, calibration and evaluation of two mathematical models for pollutant transport in a small river

Ani, E. C., Wallis, S., Kraslawski, A. & Agachi, P. S., Oct 1 2009, In : Environmental Modelling and Software. 24, 10, p. 1139-1152 14 p.

Research output: Contribution to journalArticle

46 Citations (Scopus)